Package Includes:
- (1) Audio Technica AT2050 Side-Address Studio Condenser Recording Microphone Mic
- (1) Rockville ISOBOX Recording Microphone Sound Isolation Box+Mic Stand+Pop Filter
Authorized Audio Technica Dealer!
Description of AT2050:
The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.
Features:
- Audio Technica AT2050 Side-Address Multi-Pattern Condenser Studio/Recording Microphone
- Element: Externally-polarized (DC bias) condenser
- Polar Patterns: Cardioid, Omni-Directional, Figure-Eight
- Frequency Response: 20 Hz - 20 kHz
- Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
- Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
- Impedance: 120 Ohms
-
Maximum Input Sound Level:
- 149 dB SPL, 1 kHz at 1% T.H.D.;
- 159 dB SPL, with 10 dB pad (nominal)
- Noise: 17 dB SPL
- Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 4.7 mA typical
- Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
- Three Switchable Polar Patterns: Omni, Cardioid, Figure-Eight
- Switchable 80 Hz High-Pass Filter and 10 dB pad
- Large diaphragm for smooth, natural sound and low noise
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
- Includes: Shock Mount & Protective Pouch
- Product Weight: 0.91 Lbs.
- Product Dimensions: 6.69" inches Long, 2.05" inches Maximum Body Diameter
All About Your ISOBOX (Update):
Setting Up A Dynamic or Condenser Microphone with Your ISOBOX:
How To Set Up ISOBOX to Mic Stand:
Features:
- Rockville ISOBOX Recording Microphone Sound Isolation Box
- Includes an interior adjustable Mic Stand
- Includes built-in Pop Filter
- Includes travel bag with handle
- Fully enclosed to eliminate reverberation and reflections from your room
- Inside the box: 1.6'' inch thick high-density acoustic foam
- Removes echoes and reflections & reduces noise
- Enhances sound clarity greatly and protects recordings from room coloration to produce dry sound
- A single layer pop filter is built in the front of the door to filter out harsh plosive sounds and unwanted bursts of air
- Great for vocal recording, podcasting, voice over work, instruments, percussion
- Perfect for home studios, recording studios, or recording outdoors
- Place the microphone inside the box with the door closed then you get a fully closed isolation box for your microphone
- Strong and stable box: The outer frame and grills are made of strong, lightweight aluminum
- Rubber feet
- 5/8” mic thread + 3/8” adapter
- Can be mounted to a mic stand using the included accessories or used on a desktop
- Compatible with all the microphones, such as vocal microphone, condenser microphone, USB mics, cell phones
- Work with various mic stands such as tripod mic stands or even desktop mic stands
- The internal mic stand can be installed in 4 placements on sliding rails or it can be removed entirely
- 4 holes located on that bottom that allow 4 different entry points for XLR mic cables
- Removable door with tight latches for secure opening and closing
- USA and EU patent pending
- Box exterior dimensions: 13” x 13” x 16.93” Inches (330x330x430mm)
- Box interior dimensions: 9.84” x 9.84” x 14.17” Inches (250x250x360mm)
- Net weight: 6.6 lbs.
- UPC:
- 613817140687