Package Includes:

• (1) Audio Technica AT2050 Side-Address Studio Condenser Recording Microphone Mic
• (1) Audio Technica AT8175 Pop Filter For AT2020USB-X/AT2020USB/AT2020/AT2035/AT2050

---

Authorized Audio Technica Dealer!

Description:

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Features:

• Audio Technica AT2050 Side-Address Multi-Pattern Condenser Studio/Recording Microphone
• Element: Externally-polarized (DC bias) condenser
• Polar Patterns: Cardioid, Omni-Directional, Figure-Eight
• Frequency Response: 20 Hz - 20 kHz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level:
  • 149 dB SPL, 1 kHz at 1% T.H.D.;
  • 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4.7 mA typical
• Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
• Three Switchable Polar Patterns: Omni, Cardioid, Figure-Eight
• Switchable 80 Hz High-Pass Filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Includes: Shock Mount & Protective Pouch
• Product Weight: 0.91 Lbs.
• Product Dimensions: 6.69" inches Long, 2.05" inches Maximum Body Diameter

---

Description:

Designed for use with the AT2020USB-X Condenser Microphone, the AT8175 Pop Filter is essential for recording vocals for singing, voice acting and podcasts to help reduce or eliminate popping sounds caused by plosives in the audio. Compatible with most 20 Series microphones such as the AT2020 and AT2020USB+.

Features:

• Designed for the AT2020USB-X Condenser Microphone
• Pop filter for 20 Series microphones * Compatible with most models
• Reduce or eliminate popping sounds caused by plosives during recorded speech and singing