- (1) Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone/Mic+Case
- (1) 512 Audio by Warm Audio 512-BBA 31" Adjustable Microphone Boom Arm Mic Stand
- (1) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
Authorized Audio-Technica Dealer!
Description:
Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.
Features:
- Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone
- Large diaphragm for smooth, natural sound and low noise
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom shock mount provides superior isolation
- Switchable 80 Hz high-pass filter and 10 dB pad
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Includes custom shock mount & protective pouch
Details:
- ELEMENT: Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN: Cardioid
- FREQUENCY RESPONSE: 20-20,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY: -33 dB (22.4 mV) re 1V at 1 Pa
- IMPEDANCE: 120 ohms
- MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D.;158 dB SPL, with 10 dB pad (nominal)
- NOISE: 12 dB SPL
- DYNAMIC RANGE (typical): 136 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 3.8 mA typical
- SWITCHES: Flat, roll-off;10 dB pad (nominal)
- WEIGHT: 14.2 oz (403 g)
- DIMENSIONS: 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- AUDIO-TECHNICA CASE STYLE: R5
Advantages of buying from an authorized seller:
- Best prices - We sell all Audio-Technica Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Audio-Technica product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Audio-Technica from an unauthorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Description:
The 512-BBA is an adjustable microphone boom arm featuring a silent, internal, high-tension spring design, extra-wide mounting clamp, and articulating integrated swivel. With 360 degrees of rotation and simple two-axis adjustment, you’ll easily find and maintain the perfect mic position every time without making a sound.
Bring Your Sound Closer
Bring your mic closer to your voice and away from distracting vibrations caused by typing, desk movement, and noisy fans. With professional looks and a reliable, high-tension spring hinge, 512-BBA easily stays in place without any additional tightening or adjustments.
Don’t let anything come between you and clean, clear audio.
Perfect Mic Placement (Every Time)
The 512-BBA features a durable yet lightweight steel construction that easily holds most professional recording and broadcast microphones, up to 3 lbs. Whether your perfect placement is over your monitor or stretched across the table, 512-BBA’s 360 degrees of arm rotation and smooth, dual-axis swivel lets you enjoy a full range of motion to effortlessly find the optimal mic placement.
512-BBA is outfitted with a silent-spring design so you can make all the adjustments you want without making a sound.
Features:
- Extra-wide mount. Featuring a sturdy metal C-clamp that attaches to any surface up to 2 inches thick and includes an anti-scratch pad to protect your desk
- Simple cable management. Keep your setup clean and clutter-free with the included velcro wraps for quick and simple cable management.
- Universal compatibility. Compatible with virtually any microphone, 512-BBA comes with both ⅜ and ⅝ thread adapters to make mounting a snap.
- Fully collapsible. Tucks away in an instant for compact and easy storage whenever you’re off the air.
Specifications:
- Upper Arm Length: 18.5in (470mm)
- Lower Arm Length: 18.5in (470mm)
- Weight: 3.9lbs (1.75kg)
- Horizontal Reach: 31.5in (800mm)
- Vertical Reach: 32in (820mm)
- Rotation: 360 degrees
- Load: Supports microphones weighing 1-3lbs including shock mount (450g - 1360g)
- Maximum Desktop Thickness: 2in (55mm)
- Included Accessories: 5 Velcro wraps
All About Your RCXFM20E-B:
All About Your RCX Series Cables:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- 100% Copper Conductors for Enhanced Signal Clarity
- 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 20 Ft
- Color: Black
- UPC:
- 613817133733
