• (1) Rockville ASM5 5" 2-Way 200W Active/Powered USB Studio Monitor Speakers Pair
• (1) Focusrite CLARETT 2PRE 10-In/4-Out Thunderbolt Interface w/2 Clarett Mic Preamps
• (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height
• (1) Rockville RMF1 Studio Microphone Isolation Shield with Sound Dampening Foam
• (1) Pair of Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles

Videos of ASM5:

The Rockville ASM-5 Active Studio Monitor creates a new performance level in affordable studio monitors.

Designed and engineered for refined vocal reproduction; our unique design eliminates high frequency diffraction while providing full range monitoring accuracy and enhanced bass response.

Using sophisticated computer modeling the ASM-5 features rear-firing ports that provide enhanced bass coupling thereby reinforcing and amplifying low frequency response without affecting accuracy. You will hear the difference in our design and appreciate the accurate and clean bass performance with higher, cleaner sound pressure levels.

The Neodymium silk soft dome tweeters are bather in magnetic ferro-fluid keeping them cool even when your music gets hot! The recessed tweeter bezel design provides an optimal high frequency wave guide so the sound is focused out towards the listening stage. The high frequency section features an adjustable equalization circuit so that in-room listening optimization can be easily achieved.

Optimized Frequency Amplification Full Range Digital Class D Circuit

Unlike most studio monitors, the Rockville ASM-5 studio monitors feature a Quad Amplifier design in each pair of monitors. Each woofer and tweeter features their own Frequency Optimized Amplifier, so there is no wasted energy in the amplification stage and an absolute minimum of harmonic distortion. The efficiency of our digital Class D design is in excess of 90% with zero discernible hiss or white noise. The Input Volume Gain Control provides an adjustable gain range from -30dB to +6dB so that your ASM-5 is compatible with a majority of mixing scenarios. The ASM-5 feature various input connections so they hook-up to any mixing or monitoring system including unbalanced RCA, balance 1/4" TRS and USB. In addition, front accessible headphone jacks make the ASM-5 even more versatile.

Features:

• Rockville ASM5 5" 2-Way 200 Watt Active/Powered Pair of USB Studio Monitor Speakers
• Two-Way Active Studio Monitor Speaker System
• Full Range Class D Amplifier Circuitry
• LED Power on Indicator on Multi function Rotary Front Volume Control
• Ferro Fluid Enhanced 1" Neodymium Soft Dome Tweeter
• Talc Filled, Injection Molded Graphite Composite Cone Woofer
• Curved Front Bexel Design Eliminates Standing Wave Distortion
• Waveguide Design Provides Amazing Detail and Imaging
• Computer Optimized Rear-Firing Port Provides Low Bass Extension Loading
• Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum
• One Complete Pair with Master / Salve Output Connection with Included Noise Rejection Cabling
• Includes RCA to Mini Jack Cable with Adapter, High Speed USB Cable, Power Cable

Details:

• Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifier
• Low-Mid Frequency: 5" Talc Filled, Injection Molded Graphite Composite Cone
• High-Frequency: 1" Silk Soft Dome Tweeter
• Frequency Response: 49Hz - 21 kHz
• SPL Peak: 170dB @ 1w/1m
• Each Speaker Power Output: 50 Watts RMS / 100 Watts PEAK
• Low-Mid Frequency Power: 35 Watts RMS / 70 Watts PEAK
• Input Impedance (Ohms): 10 K Ohm Balanced
• High Frequency Equalization Adjustment: -4dB, -2dB, 0, +2dB
• System Volume: (-30dB to +6dB)
• Input Connectors: Unbalanced RCA; Balanced 1/4" TRS; USB 2.0 High Speed; Cabinet Front Headphone
• AC Power Input: 120V (60Hz)
• Cabinet Finish: Black Vinyl
• Dimensions (H x W x D): 11.1" (282mm) x 7.28" (185mm) x 9.06" (230mm)
• Weight: 13.4 lbs (6.1kg)

Owner’s Manual

Video of CLARETT 2PRE:

Unboxing Video of CLARETT 2PRE:

Description:

Better. Faster. Easier.

Excellent sound is the quality Clarett owners love most. With up to 119dB dynamic range, superbly low noise, precision 24/192 conversion and two specially-designed mic preamps with a unique analogue “Air” effect, Clarett 2Pre simply sounds great, easily out-performing other interfaces in its class and beyond. Meanwhile, its astonishing 1.38ms round-trip latency* simplifies your workflow and lets you use your favourite plug-ins in real time.

Two New Clarett Mic Pres with extra ‘Air’

The mic pres have been designed especially for the Clarett range, with plenty of gain, yet low noise and distortion. In addition, they include a special “Air” feature that switches in an analogue model of the classic transformer-based Focusrite ISA mic pre. The Instrument inputs also feature extra headroom to handle the loudest pickup.

Precision Digital Conversion
Clarett features Focusrite’s class-leading 24/192 conversion: with up to 119dB dynamic range, Clarett offers the cleanest way yet to get music in and out of your DAW.

Plug Straight In
Do not underestimate the quality of the Clarett range DI. This newly designed instrument input allows for even the hottest of guitar pick-ups to be recorded without clipping, and the performance specifications easily match some of the finest dedicated DI’s on the market. Coupled with the low latency environment, now you can get the most out of recording through your favorite amp sim and guitar effect plug-ins in real time.

Revolutionise your Workflow
Clarett’s ultra-low round-trip latency completely transforms your workflow. If you’re used to having to build two different mixes – one using input monitoring to overdub, the other using the DAW for playback – the good news is that now, one is enough. Build your mix on the DAW and use it whether you’re overdubbing (monitoring the input you’re recording with the new Focusrite Control software mixer) or playing back, with all your plugins in place, all the time. Use your favorite plugins while recording too – whether it’s reverb on a vocal, a guitar amp simulator, or even virtual instruments live on stage.

Intuitive, Easy to Use Software Mixer and Sweet Sounding Plug-ins
Focusrite Control is a brand new software mixer designed for easy configuration of monitoring and routing setups. Simple and intuitive to use, Focusrite Control offers a traditional mixer workflow and allows immediate access to internal hardware functions. Also included is a sweet sounding plug-in collection comprising Softube's world-class Time and Tone Bundle, with TSAR-1R Reverb, Tube Delay and Saturation Knob. This is complemented by the Red 2 & Red 3 AAX, AU & VST Plug-in Suite, which accurately models Focusrite's classic Red range equalizer and compressor hardware.

'Gain Halos’ help keep levels in check
The front panel inputs include Focusrite’s signature “Gain Halo” – an illuminated ring around the gain control that lights up green when there’s signal and red when it’s too high. There’s a main monitor knob plus a high-power headphone output with its own volume control.

The ins and outs
Clarett 2Pre offers 10 audio inputs and four outputs, including two front-panel multi-function inputs and a headphone output, plus four rear-panel line outputs (one pair doubling the headphone feed). There are also eight channels of ADAT-format digital input – ideal for adding eight channels of digital mic pre.

Remote control from iPhone or iPad - Download the free Focusrite iOS Control app and adjust cue mixes created with the Focusrite Control desktop app remotely from an iPad, iPhone or iPod touch.

Included:

• Ableton Live Lite is included as a free download.
• 2GB Loopmasters Samples are included as a free download.
• Free monthly offers from Focusrite Plug-In Collective.
• Free XLN Addictive Keys license with purchase.
  

Features:

• Focusrite CLARETT 2PRE 10-In/4-Out Thunderbolt Interface w/2 Clarett Mic Preamps
• Two New Clarett Mic Pres with extra "Air"
  
• Precision 192kHz/24-bit conversion delivering up to 119dB of dynamic range
  
• Ultra-low latency lets you use your DAW plug-ins in real time
  
• High-power headphone output deliver plenty of level even on high-impedance headphone
  
• "Gain Halo" Metering provide clear indication of levels to avoid clipping
  
• Software Mixer for maximum control
• Works with Focusrite iOS Control
  
• Powerful plug-ins included:
  
  • Red 2 and Red 3 plug-in suite (AAX, AU, VST)
    
  • Softube's Time and Tone Pack (TSAR-1R reverb, Tube Delay, and Saturation Knob)
    
• ADAT optical input expands input capability with eight additional digital channels
• THD+N: 0.001%
  
• Noise EIN: –128 dBu (A-Weighted)
  
• Maximum input level: +18 dBu
  
• Gain Range: 57dB
• Line Inputs
  
• Frequency Response: 20 Hz - 20 kHz +/-0.1 dB
  
• Dynamic Range: 118 dB (A-weighted)
  
• THD+N: 0.001%
  
• Maximum input level: 26dBu
  
• Gain Range: 57dB
• Instrument Inputs
  
• Frequency Response: 20 Hz – 20 kHz ± 0.1 dB
  
• Dynamic Range: 116 dB (A-weighted)
  
• THD+N: 0.001%
  
• Maximum input level: +14dBu
  
• Gain Range: 57dB
• Line & Monitor Outputs
  
• Dynamic Range (Line Outputs): 119dB
  
• Dynamic Range (Monitor Outputs): 118dB
  
• Maximum Output Level (0 dBFS): +16 dBu, balanced
  
• THD+N: 0.0007%
• Headphone Outputs
  
• Dynamic Range: 116dB
  
• THD+N: 0.0008%
  
• Maximum Output Level: +16dBu

Includes:

• Pro-m50 headphones
  
• Detachable cable
  
• Soft suede and  leather ear cushions (interchangeable)
  
• Leather hard travel protective case
  
• Gold plated ¼” adapter

Video of PRO-M50:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear. 

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!  

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad 
• Professional High-Definition Studio Headphones
  
• 40mm Neodymium drivers
  
• Ergonomically designed swivel ear cups
  
• Supreme sound isolation
  
• Accurate sound reproduction
  
• Minimal bleed
  
• Sturdy and durable steel headband and arms
  
• Soft leather headband cover
  
• Interchangeable leather and soft suede ear cups covers included
  
• Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
  
• Gold plated 3.5mm connector
  
• Gold plated ¼” adapter
  
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting
  

Specifications:

• Style: Closed-Back
  
• Design: Circumaural
  
• Transducer Type: Dynamic
  
• Driver: 40MM 
  
• Sensitivity: 97±3dB
  
• Impedance: 32ohm
  
• Frequency Response:10Hz – 25KHz
  
• Max. Power: 600MW
  
• Rating Power: 260MW
  
• Net Weight:290g (with cable)

Video of RCM03:

Unboxing Video of RCM03:

• RCM03 Condenser Microphone (made of aluminum!)
  
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
  
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  
• Metal shock mount
  
• Metal Anti-wind foam cap
  
• Owners Manual
  
• Warranty card
  

Features:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
  
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
  
• Large diaphragm for smooth, natural sound and low noise
  
• Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer)
  
• Uni-directional
  
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  
• Output impedance: 200Ω±30%(at 1kHz)
  
• Standard operating voltage: 3V
  
• Operating voltage range: 1.5V-10V
  
• Current consumption: less than 500uA
  
• Voltage deduction characteristic: within 3dB at 2V
  
• S/N ratio: More than 24dB
  
• Frequency Response: 30Hz - 20 KHz
  
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
  
• Load impedance: Greater or = to 1000 Ohms
  
• Equivalent Noise level: Less than 18dB A (IEC581-5)
  
• Max. Input SPL: 126dB(THD≤1.0% at 1kHZ)
  
• Electrical current: Greater than 4.8Ma
  
• Microphone body net weight:320 Grams (0.7 Pounds)
  
• Microphone Max.diameter 44mm (1.73” inches)
  
• Microphone Length 217mm (8.54” inches)
  
• Microphone material: steel grille + Alluminum (handheld part)
  
• PCB Layout: Surface mount

Owner’s Manual

Video of RVSM1:

• (2) Near-Field Monitor Stands

Features:

• Studio Monitor Stands (Pair)
• Adjustable Height
• Steel Construction
• Nylon clutch for adjusting
• EVA Pad on top to eliminate unwanted vibrations
• Triple enforced steel base with ultimate sturdiness
• Black Color
• Weight capacity: 80 lbs.
• Adjustable height Range: 33-45 inches
• Base: 17.7 x 17.7 x 17.7 inches
• Top Plate: 9.05 x 9.45 inches
• Tube Diameter: 1.5 inch- 1.37 inch

Owner’s Manual

Video of RMF1:

Unboxing Video of RMF1:

What's Included:

• 3 Panel Mic Isolation Shield
• Hardware to Mount unit to your mic stand
• 5/8” Mic Adapter
• Desktop mic attachment

Rockville’s RMF1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 1.5-inch-thick high density acoustic foam, the RMF1 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the RMF1 your go-to sound dampening isolation shield.

Features:

• RMF1 Pro Audio Acoustic Microphone Isolation Shield with Sound Dampening Foam
• Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
• Isolates Directional Microphones from Off Axis Coloration
• Limits External Bleed from Unintended Sound Sources
• Features 1.5-Inch-Thick High Density Pyramid Acoustic Foam 
• Front and a vented metal back plate for the Best Noise Reflection Reduction
• Can be used in fixed location
• Stand mountable
• Provides Vocal Booth Style Recordings with Minimal Footprint
• Professional Studio-Grade
• Rugged Finish Makes This Easy to Transport
• Tri-Pod Foot Design for Stability on Flat Surfaces
• 3/8 Die-Cast Metal Threads 
• Mic Stand with 5/8 Adapter
• The shield is made of pure high-grade steel
• Number of Panels : 3 pcs
• Dimensions Each Panel : 8.2'' x 4.5'' 
• Dimensions Assembled Unit : 11'' x 4.3” x 16.3” 

Owner’s Manual

Video of RRS190S:

Description:

The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music.  These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”.  Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

• Easiest and affordable way to improve your studio monitors sound
• Decouples your studio monitors from desktops and monitor stands for accurate reproduction
• Each package contains 2 Isolation Pads - enough for 2 studio monitors
• 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
• Supports up to 100 lbs., so they can isolate a variety of studio gear
• Handsome charcoal gray color

Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors

Features:

• Rockville RRS190S: Monitor Isolation Pads
• 3 Angle High Density Foam
• 7.5" x 9.5"
• High quality, High Density Foam
• Eliminates vibrations and unwanted noises in your studio
  
• Price is for (2) pads which accommodates (2) speakers