- (2) Rockville RHTSC 36" Inch Surround Sound Home Theater Speaker Stands
- (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville ASM5 5" 2-Way 200W Active/Powered USB Studio Monitor Speakers Pair
- (1) Pair Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
The Rockville RHTSC high performance wood speaker stands are designed with appearance, performance, and quality in mind. These stands are perfect for Bookshelf speakers, surround sound speakers and even studio monitors!
Our stands are finished with premium furniture-grade paint that will not crack, chip, or peel. They will look great in your living room, family room, den, or even studio. These stands are constructed from high quality medium density fiber core to minimize resonance. Unlike our competitors who use particle board we use a higher quality wood in the construction of our stands.
With the included brass and rubber spikes as well as the included EVA speaker isolation pads you can feel confident that your speakers will be sturdy and perform optimally no matter what floor surface they are on.
In addition to appearance and quality we also made sure to focus on performance. The height of these stands are 36”. The reason we chose this specific height is that after testing stands at other heights we noticed this height was optimal for listening. In addition to performance we also would like to note that at 36” these stands look gorgeous! The included isolation pads not only provide a no-slip surface but help your speakers achieve superior acoustic quality.
Another really cool feature I would like to mention is the empty body design. By adding sand to the body of the stand you can increase the weight if you so choose. The load capacity of these stands are 60 lbs. Most other stands on the market have a maximum load capacity of 20 lbs. which really is not enough for a lot of speakers on the market. These stands are sturdy, built well, look great, and out-perform the competition so buy with confidence!
Includes:
- 8 Isolation pads
- 8 Brass spikes
- 8 Rubber spikes
- 4 Cable clips
- 4 Cable ties
- 16 Screws
Features of RHTSC:
- (2) Rockville RHTSC 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
- Pair Rockville RHTSC high performance wood speaker stands
- Finished with premium furniture-grade paint that will not crack, chip, or peel.
- Made from high quality medium density fiber core to minimize resonance
- Brass & Rubber spikes add stability to any floor surface
- Isolation pads create a no-slip surface as well as improve acoustical performance
- Empty body design allows you to add sand in order to increase the weight of the stands if needed
- 60 lbs. load capacity allows you to use a heavier speaker without compromising stability.
Specifications:
- Stands Height: 36"
- Base plate size: 11.8" 9.25"
- Top Platform size: 9.25" 7.28" (For smaller size speakers)
- Top Platform size 2: 9.25" 11.8" (For larger size speakers up to 8")
- Item Load weight capacity: 60 lbs.
- Item weight per pair 25 lbs.
- Shipping weight 29 lbs.
- Color: Classic
- Shipping dimensions 36” x 11.4” x 9.25”
- Product dimension 11.8” x 9.25” x 36”
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.
Includes:
- Pro-m50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼” adapter
Video of PRO-M50:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼” adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz – 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight:290g (with cable)
Advantages of buying from an authorized seller:
- Best prices - We sell all Samson Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Samson product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Samson from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Video of RCM03:
Unboxing Video of RCM03:
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03
Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
- 100%
Copper 10 foot XLR to XLR cable to connect to any mixer with phantom
power
- Metal
shock mount
- Metal
Anti-wind foam cap
- Owners
Manual
- Warranty
card
Features:
- Rockville RCM03 Pro Studio
Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized
Condenser Cardioid Design
- Large diaphragm for smooth, natural
sound and low noise
- Power Requirements: 48V DC phantom
power or computer sound card (can connect to the phantom power channel
of your mixer or can connect to your laptop or computer)
- Uni-directional
- Sensitivity: -27dB±2dB(0dB=1V/Pa
at1kHZ)
- Output impedance: 200Ω±30%(at 1kHz)
- Standard operating voltage: 3V
- Operating voltage range: 1.5V-10V
- Current consumption: less than
500uA
- Voltage deduction characteristic:
within 3dB at 2V
- S/N ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter cutoff
frequency: 40Hz---16 KHz
- Load impedance: Greater or = to
1000 Ohms
- Equivalent Noise level: Less than
18dB A (IEC581-5)
- Max. Input SPL: 126dB(THD≤1.0% at
1kHZ)
- Electrical current: Greater than
4.8Ma
- Microphone body net weight:320
Grams (0.7 Pounds)
- Microphone Max.diameter 44mm (1.73”
inches)
- Microphone Length 217mm (8.54”
inches)
- Microphone material: steel grille +
Alluminum (handheld part)
- PCB Layout: Surface mount
Videos of ASM5:
The Rockville ASM-5 Active Studio Monitor creates a new performance level in affordable studio monitors.
Designed and engineered for refined vocal reproduction; our unique design eliminates high frequency diffraction while providing full range monitoring accuracy and enhanced bass response.
Using sophisticated computer modeling the ASM-5 features rear-firing ports that provide enhanced bass coupling thereby reinforcing and amplifying low frequency response without affecting accuracy. You will hear the difference in our design and appreciate the accurate and clean bass performance with higher, cleaner sound pressure levels.
The Neodymium silk soft dome tweeters are bather in magnetic ferro-fluid keeping them cool even when your music gets hot! The recessed tweeter bezel design provides an optimal high frequency wave guide so the sound is focused out towards the listening stage. The high frequency section features an adjustable equalization circuit so that in-room listening optimization can be easily achieved.
Optimized Frequency Amplification Full Range Digital Class D Circuit
Unlike most studio monitors, the Rockville ASM-5 studio monitors feature a Quad Amplifier design in each pair of monitors. Each woofer and tweeter features their own Frequency Optimized Amplifier, so there is no wasted energy in the amplification stage and an absolute minimum of harmonic distortion. The efficiency of our digital Class D design is in excess of 90% with zero discernible hiss or white noise. The Input Volume Gain Control provides an adjustable gain range from -30dB to +6dB so that your ASM-5 is compatible with a majority of mixing scenarios. The ASM-5 feature various input connections so they hook-up to any mixing or monitoring system including unbalanced RCA, balance 1/4" TRS and USB. In addition, front accessible headphone jacks make the ASM-5 even more versatile.
Features:
- Rockville ASM5 5" 2-Way 200 Watt Active/Powered Pair of USB Studio Monitor Speakers
- Two-Way Active Studio Monitor Speaker System
- Full Range Class D Amplifier Circuitry
- LED Power on Indicator on Multi function Rotary Front Volume Control
- Ferro Fluid Enhanced 1" Neodymium Soft Dome Tweeter
- Talc Filled, Injection Molded Graphite Composite Cone Woofer
- Curved Front Bexel Design Eliminates Standing Wave Distortion
- Waveguide Design Provides Amazing Detail and Imaging
- Computer Optimized Rear-Firing Port Provides Low Bass Extension Loading
- Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum
- One Complete Pair with Master / Salve Output Connection with Included Noise Rejection Cabling
- Includes RCA to Mini Jack Cable with Adapter, High Speed USB Cable, Power Cable
Details:
- Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifier
- Low-Mid Frequency: 5" Talc Filled, Injection Molded Graphite Composite Cone
- High-Frequency: 1" Silk Soft Dome Tweeter
- Frequency Response: 49Hz - 21 kHz
- SPL Peak: 170dB @ 1w/1m
- Each Speaker Power Output: 50 Watts RMS / 100 Watts PEAK
- Low-Mid Frequency Power: 35 Watts RMS / 70 Watts PEAK
- Input Impedance (Ohms): 10 K Ohm Balanced
- High Frequency Equalization Adjustment: -4dB, -2dB, 0, +2dB
- System Volume: (-30dB to +6dB)
- Input Connectors: Unbalanced RCA; Balanced 1/4" TRS; USB 2.0 High Speed; Cabinet Front Headphone
- AC Power Input: 120V (60Hz)
- Cabinet Finish: Black Vinyl
- Dimensions (H x W x D): 11.1" (282mm) x 7.28" (185mm) x 9.06" (230mm)
- Weight: 13.4 lbs (6.1kg)
Video of RRS190S:
Description:
The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.
Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.
How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”. Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.
Rockville Studio Isolation Pads Feature:
- Easiest and affordable way to improve your studio monitors sound
- Decouples your studio monitors from desktops and monitor stands for accurate reproduction
- Each package contains 2 Isolation Pads - enough for 2 studio monitors
- 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
- Supports up to 100 lbs., so they can isolate a variety of studio gear
- Handsome charcoal gray color
Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.
Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors
Features:
- Rockville RRS190S: Monitor Isolation Pads
- 3 Angle High Density Foam
- 7.5" x 9.5"
- High quality, High Density Foam
- Eliminates vibrations and unwanted noises in your studio
- Price is for (2) pads which accommodates (2) speakers
Video of ROCKSHIELD 3:
Includes:
- 5 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter
- Desktop mic attachment
RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.
Features:
- RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
- Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8 Die-Cast Metal Threads
- Mic Stand with 5/8 Adapter
- The shield is made of pure high-grade steel
- Number of Panels: 5 pcs
- Dimensions Each Panel: 6.3'' x 12.2'' inch
- Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch
- UPC:
- 613815672432