Package Includes:
- (1) Pair Rockville ASM4 4" Pro Studio Monitor Computer Speakers w/Bluetooth+Optical
- (1) Pair Rockville RHT8B Computer/Bookshelf Desktop Speaker/Studio Monitor Stands-Black
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
All About Your ASM4:
How To Set Up Your ASM4 Speakers:
How To Set Up Your ASM4 Speakers to an Audio Interface:
How To Set Up the Optical Input on Your ASM4:
What's in the Box:
- Power Cable
- 3.5mm to dual RCA cable
- Speaker cable
- Owner’s Manual
Description:
The Rockville ASM4 Active Studio Monitors were designed and engineered to be your go-to speakers for studio monitoring and entertainment. This is tuned to give a flat and balanced frequency response which also makes it the perfect computer speakers.
This speaker system provides full range monitoring accuracy with good bass down to 50Hz.
This speaker was DSP tuned by the Rockville development team. We compared it to the top studio monitors on the market and we made sure that we out-perform anything in our price range.
The Neodymium silk dome tweeters give smooth highs while our efficient woofer and rear bass port provide clear mids and lows.
We added Bluetooth playback so you can use these for entertainment in addition to studio monitoring. We also added an optical input so you can connect these to your TV or other digital source. The left and right ¼" TS jacks will allow you to connect any pro audio source such as a mixer, interface, etc.
Features:
- Rockville ASM4 4" 2-Way 200 Watt Active/Powered Pair of Studio Monitor Speakers with Bluetooth
- 200w Peak output / 50 Watts RMS
- 4" Woofer with efficient paper cone and rubber surround
- 1" Silk dome tweeter
- ½" MDF enclosure with rear firing port for enhanced low frequencies
- DSP tuned with a flat and balanced frequency response
- Built in Bluetooth playback with 35 foot range
- Optical input to connect to your TV or other digital source
- Left and Right ¼" TS input for any pro audio sources (mixer, interface, etc)
- RCA aux input
- 3.5MM aux input
- Bluetooth version 5.0
- Full Range Class D Amplifier Circuitry
- LED Power on Indicator
- Rotary Front Volume Control
- Curved Front Bezel Design Eliminates Standing Wave Distortion
Specifications:
- Frequency Response: 50Hz - 20 kHz
- Total Speaker Power Output: 50 Watts RMS / 200 Watts PEAK
- Input Impedance (Ohms): 10 K Ohm Balanced
- AC Power Input: 110/240 auto-switching
- Cabinet Finish: Black
- Dimensions of each speaker (H x W x D): 10.35" (263mm) x 5.91" (150mm) x 8.86" (225mm)
- Weight of the pair of speakers: 12.6 lbs. (5.7kg)
Video of RHT8B:
Includes:
- 8 Isolation pads
- 4 Cable clips
- 4 Cable ties
- 16 Screws
Description:
The Rockville RHT8B high performance Desktop wood speaker stands are designed with appearance, performance, and quality in mind. These stands are perfect for Computer speakers, Bookshelf speakers, and studio monitors!
Our stands are finished with premium furniture-grade paint that will not crack, chip, or peel. These stands are constructed from high quality medium density fiber core to minimize resonance. Unlike our competitors who use particle board we use a higher quality wood in the construction of our stands.
With the included EVA speaker isolation pads you can feel confident that your speakers will be sturdy and perform optimally. The load capacity of these stands are 66 lbs. Most other stands on the market have a maximum load capacity of 20 lbs. which really is not enough for a lot of speakers on the market. These stands are sturdy, built well, look great, and out-perform the competition so buy with confidence!
Features:
- 2 Rockville RHT8B Computer/Bookshelf Desktop Speaker/Studio Monitor Stands-Black
- Finished with premium furniture-grade paint that will not crack, chip, or peel.
- Made from high quality medium density fiber core to minimize resonance
- Isolation pads create a no-slip surface as well as improve acoustical performance
- 66 lbs. load capacity allows you to use a heavier speaker without compromising stability.
Specifications:
- Stands Height: 8"
- Base plate size: 11.8" 9"
- Top Platform size: 9.25" 7.28"
- Item Load weight capacity: 66 lbs.
- Item weight per pair: 9.6 lbs.
- Shipping weight: 11.5 lbs.
- Color: Black
- Shipping dimensions: 13.8" x 10" x 11.4"
- Product dimension: 11.8" x 9" x 8"
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.
All about Your RCM03:
Description:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Metal Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB (0dB=1V/Pa at1kHZ)
- Output Impedance: 200O±30% (at 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V-10V
- Current Consumption: Less than 500uA
- Voltage Deduction Characteristic: within 3dB at 2V
- S/N Ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
- Load Impedance: Greater or = to 1000 Ohms
- Equivalent Noise Level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
- Electrical Current: Greater than 4.8Ma
- Microphone Body Net Weight: 320 Grams (0.7 Pounds)
- Microphone Max.diameter: 44mm (1.73" inches)
- Microphone Length: 217mm (8.54" inches)
- Microphone Material: Steel grille + Alluminum (handheld part)
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Includes:
- PRO-M50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼" adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
- UPC:
- 613817108564