Package Includes:
- (1) MTX 7515-44 15" 1500w Peak/750w RMS Competition Subwoofer DVC 4ohm Car Audio Sub
- (1) Rockville RSV15 15" Vented Car Audio Subwoofer Box 2.6 Cubic Ft. Sub Enclosure
- (1) Rockmat 50 SqFt Butyl Rubber Sound Deadener Material Bulk Car Kit
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Authorized MTX Audio Dealer!
Description of 7515-44:
Our 75 Series SuperWoofer has been known for being extremely reliable while it rocks like nobody's business...one of the best in the market. We stepped it up a few notches and have now brought the 75 Series back. Just like the 95 Series, the 75 Series is a "GAME CHANGER" in the SPL world. And sound quality is incomparable, exceeded by only the MTX 95 Series. If you compete and want a SuperWoofer that's not only affordable, but reliable, and has been engineered by some of the best in the manufacturing world then get ready to... "PUT SOME THUNDER IN YOUR DOME
The 7515-44
This 7515-44 is a 15 inch diameter, dual voice coil, 4 ohm subwoofer built
on the MTX tradition of getting more than expected.
The MTX Inverted Apex Surround
This super Car Audio Subwoofer features an Inverted Apex Surround that
increases surface area and Xmax allowing for increased volume displacement and
higher SPL as well as a progressive, layered spider that eliminates break in
time and lowers distortion resulting in improved sound quality. This subwoofer
has a dual layer thermal management system that incorporates Spider Plateau
Venting, a mechanical cooling process that targets cool air at the voice coil,
and an integrated t-yoke heat sink that helps eliminate excess temperature for
long term performance. The glass fiber cone offers excellent stiffness to weight
ratio providing outstanding sensitivity.
Features:
- MTX 7515-44 15" 1500 Watt Peak/750 Watt RMS 4-Ohm Car Subwoofer
- RMS Power Handling: 750 Watts
- Peak Power Handling: 1500 Watts
- Recommended Amp Power: 375-750 Watts RMS
- Impedance: Dual 4 Ohms
- Frequency Response: 20Hz - 130Hz
- Sensitivity: 87.85 dB
- Voice Coil: 2.5" inches (Dual)
- Magnet Weight: 119 oz.
- Mounting Depth: 8.375" inches
- Cut Out Diameter: 13.875"
- Volume Displacement: 91.66 cu in
- Sealed Enclosure Net Volume: 1.5 cu ft.
- Vented Enclosure Net Volume: 2.48 cu ft.
- Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
- Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
- Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
- Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
- Cast Aluminum Basket: Reduces Resonance for Improved Sound Quality
Click here for the Installation Sheet
The RSV15 is a single 15" vented subwoofer box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RSV15 Single 15" 2.6 cu. ft. 3/4" MDF Vented Subwoofer Enclosure Box
- Machine precision cut mounting holes
- ¾” USA Heavy Duty MDF Construction
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work perfectly with high powered subs
- Designed to give the best sound quality
- Tuning frequency: 32Hz
Enclosure Measurements:
- Type of Enclosure: Ported/Vented
- Enclosure Sub Size: Single 15"
- Dimensions in Inches: 21" x 18" x 16.25"
- Top and Bottom Depth: 16.25"
- Mounting Depth: up to 15" (enough depth for any shallow sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.5 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.6 Cubic Feet
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Video of RM50RT-B:
Includes:
- 50 Square Foot Roll of Rockmat Sound Dampening Material (70mil)
- Roller for a perfect installation
The Rockville Rockmat RM50RT-S sound dampening material is a must have for any professional car audio install. This package is a bulk kit which is a big 50 square foot roll. Since this is a big roll you can cut it as needed without wasting any! We also include everything needed for a quick and easy installation! Our Rockmat will increase how loud your car stereo plays! It also improves bass quality and eliminates those bad rattling and distortion sounds.
Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.
Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as GTMAT for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of butyl rubber and aluminum which is the same as many of the more expensive brands out there that sell for twice our price.. We do not cheat our customers. We only make top quality gear over here at Rockville!
Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.
We make all our models in 2 color options. You get the choice of black and silver. We decided to tattoo our logo all over the material to make sure our Rockmat has a cool look to it.
Installation
Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area.
Rockmat is
pressure sensitive so after you apply the material into your desired
area; apply
pressure to it. That is it! Installation takes only minutes! Please
note our
Rockmat is also easy to cut into the desired shape you need!
To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!
Features:- Rockville Rockmat
RM50RT-B 50 Sq Ft Sound Deadener Bulk Kit 72 Mil+Roller
- 100% butyl rubber material with an aluminum heat resistant coating! (no asphault in our sound dampening material!!!)
- Contains a big
roll of 50 feet so you can cut as needed!
- Multi-purpose is
ideal for multiple applications including rear decks, doors, floors,
any part of the trunk, trunk, roofs, quarter panels, hoods, etc.
- Paintable Surface
- Increases SPL
–The use of our Rockmat will not only make your sound more clear and
eliminate distortion but it will make your music louder by eliminating
sound leakage!
- Improves Bass
Quality and Reduces Bass
Distortion
- Kill unwanted
noise, rattles, vibrations
- Reduce exhaust
and engine noise
- Aluminum-coated
for heat-resistance
- 72mil thickness
- Full car
installation reduces unwanted noises 5-8 dB
- Increased
flexibility
- High tack
permanent adhesive to make your installation quick and
easy!
- Permanent
installation with ability to withstand even the highest temperatures!
- Waterproof
material! Our material is very durable. It is waterproof, heat proof
and flexible
- Sticks to any
surface
- Our model has new
and improved increased flexibility for an easier installation and top
sound quality!
- Designed and
engineered by Rockville USA!
- Manufactured with
the newest state-of-the-art machinery. We use only the purest raw
materials as well!
- Every product is
checked during production for consistency. We have very high quality
standards!
- We use very high
quality butyl rubber which gives amazing sound insulation and shock
absorption. We do not use any asphalt in our product!
- Available in both
black and silver
Specifications:
- Dimensions of
sound dampening material per roll: 18" Wide x 33.3 Feet Long
- Raw Material:
90% high absorbent butyl rubber and 10% pure-grade
aluminum
- High-Tack Self-adhesive
- Reduces unwanted
noises 5-8 dB
- Adhesive
temperature range of -100F to 300F (-60C to 150C).
- Material: Butyl
rubber
- Color: Black
- Weight: 36.16
Lbs. (entire roll)
- Shipping weight:
37.57 Lbs.
- Shipping
Dimensions: 22.05" x 8.78" x 9.25" Inches
Features
of roller:
- Made of high
quality Wood & Steel
- Designed
especially for use in installing sound dampening material
- Length: 7 in
- Handle Length: 5
in
- Roller
Diameter: 1.3 in
- Material Color:
Gray
- Weight: 0.44 Lbs.
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.
- UPC:
- 613815849902
