Package Includes:
- (1) MTX 7515-22 15" 1500w Peak/750w RMS Competition Subwoofer DVC 2ohm Car Audio Sub
- (1) Rockville RSV15 15" Vented Car Audio Subwoofer Box 2.6 Cubic Ft. Sub Enclosure
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Authorized MTX Audio Dealer!
Description of 7515-22:
Our 75 Series SuperWoofer has been known for being extremely reliable while it rocks like nobody's business...one of the best in the market. We stepped it up a few notches and have now brought the 75 Series back. Just like the 95 Series, the 75 Series is a "GAME CHANGER" in the SPL world. And sound quality is incomparable, exceeded by only the MTX 95 Series. If you compete and want a SuperWoofer that's not only affordable, but reliable, and has been engineered by some of the best in the manufacturing world then get ready to... "PUT SOME THUNDER IN YOUR DOME
The 7515-22
This 7515-22 is a 15 inch diameter, dual voice coil, 2 ohm subwoofer built
on the MTX tradition of getting more than expected.
The MTX Inverted Apex Surround
This super Car Audio Subwoofer features an Inverted Apex Surround that
increases surface area and Xmax allowing for increased volume displacement and
higher SPL as well as a progressive, layered spider that eliminates break in
time and lowers distortion resulting in improved sound quality. This subwoofer
has a dual layer thermal management system that incorporates Spider Plateau
Venting, a mechanical cooling process that targets cool air at the voice coil,
and an integrated t-yoke heat sink that helps eliminate excess temperature for
long term performance. The glass fiber cone offers excellent stiffness to weight
ratio providing outstanding sensitivity.
Features:
- MTX 7515-22 15" 1500 Watt Peak/750 Watt RMS 2-Ohm Car Subwoofer
- RMS Power Handling: 750 Watts
- Peak Power Handling: 1500 Watts
- Recommended Amp Power: 375-750 Watts RMS
- Impedance: Dual 2 Ohms
- Frequency Response: 20Hz - 140Hz
- Sensitivity: 87.53 dB
- Voice Coil: 2.5" inches (Dual)
- Magnet Weight: 119 oz.
- Mounting Depth: 8.375" inches
- Cut Out Diameter: 13.875"
- Volume Displacement: 91.66 cu in
- Sealed Enclosure Net Volume: 1.5 cu ft.
- Vented Enclosure Net Volume: 2.48 cu ft.
- Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
- Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
- Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
- Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
- Cast Aluminum Basket: Reduces Resonance for Improved Sound Quality
The RSV15 is a single 15" vented subwoofer box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RSV15 Single 15" 2.6 cu. ft. 3/4" MDF Vented Subwoofer Enclosure Box
- Machine precision cut mounting holes
- ¾” USA Heavy Duty MDF Construction
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work perfectly with high powered subs
- Designed to give the best sound quality
- Tuning frequency: 32Hz
Enclosure Measurements:
- Type of Enclosure: Ported/Vented
- Enclosure Sub Size: Single 15"
- Dimensions in Inches: 21" x 18" x 16.25"
- Top and Bottom Depth: 16.25"
- Mounting Depth: up to 15" (enough depth for any shallow sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.5 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.6 Cubic Feet
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815849872
