Package Includes:

• (1) Pair Kicker 48PSC574 5x7" Saddlebag Speakers for 2006-Up Harley Davidson PSC57
  
• (1) Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Micro Amp
  

---

Description:

KICKER® PS speakers are designed by bike riders and powersports enthusiasts. Designed specifically to sound good and last through every kind of weather, these drivers are the perfect solution for motorcycles, ATVs.

With a high-output tweeter and high-efficiency neodymium motor, the waterproof PSC57 5 x 7 saddlebag coaxials sound clean and loud without adding unnecessary weight. The included Harley-Davidson connector and separate spade terminals make the PSC57 the perfect drop-in upgrade for your bike.

These weather-proof drivers are made specifically to use factory bolt patterns and speaker terminals on your 2006-newer Harley-Davidson motorcycles. PS speakers are designed by KICKER’s own bike riders and in-house engineers specifically to sound great and last through every kind of weather.

Features:

• Quad Neo-Magnet Design for Superior Performance and Efficiency
  
• PEI-Domed, ¾-Inch Tweeter, Bridge-Mounted and High Output
  
• Polymer Basket for Lightweight Strength and Proper Bike Balance
  
• Water-Proof Suspension System
  
• Treated Speaker Surround Wicks Away Moisture
  
• Frequency Response Adapted for Listening Over Wind and Road Noise
  
• Genuine Harley-Davidson Speaker Terminal
  
• Works With Harley-Davidson Factory Speaker Mounts
  
• Also Designed for UTVs, Golf Carts, ATVs, Marine and Outdoor Systems
  

Specifications:

• Woofer [in, mm]: 5x7, 127x178
  
• Tweeter [in. mm]: 3/4, 20
  
• Peak Power Handling [Watts]: 120
  
• Recommended Amplifier Power [Watts RMS]: 15-60
  
• Frequency response [Hz]: 45-20k
  
• Rated Impedance [Ω]: 4

---

All About Your ATV220:

How To Set Up Your ATV220:

How To Set Up Your ATV220 To a Head Unit:

Wires, Inputs, Outputs explained on your ATV220:

Description:

The Rockville ATV220 is a 2 channel amplifier for your ATV. It will deliver 180 x 2 @ 2 ohms RMS. We dyno-test the amp to make sure you get the power we promise.

This amp is IP65 which means even if you submerged it in water for a few seconds it would still function fine. This means you do not need to worry about your amp breaking when you spray down your vehicle.

The built in Bluetooth is great because you do not even need a head unit or controller. You can just install this amp and wire it to your speakers and Bluetooth your phone to the amp.

This amp is super compact making it easy to install in tight spaces.

If you want the most waterproof and high performing ATV amplifier on the market then this is a great option for you.

Features:

• Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Waterproof Micro Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
• 2 Ohms: 400 Watts (2 x 200 Watts)
• 4 Ohms: 250 Watts (2 x 125 Watts)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):
• Peak 2 Ohms: 1600 Watts (800 x 2 Watts)
• Bridged Power Rating: 4 Ohms Bridged: 400 Watts
• Built in Bluetooth Wireless with Auto Pairing (You can run this amp without any receiver)
• IP65 waterproof rating
• All inputs and wire wiring is sealed and covered
• Conformal coated circuit board
• Anti rust materials
• This is one of the only amps on the market that is IP65. That means even if you submerged it for a couple of seconds it would work fine
• Efficiency at Full Power 4 Ohm (1kHz) 84.8%
• Efficiency at Full Power 2 Ohm (1kHz) 77.8%
• Micro Size amplifier can easily fit in tight spaces
• Digital Class D Audio Topology
• Distortion(THD): =0.5%
• Full Range/Low Pass/High Pass Configurable
• High Input (Speaker level Input)
• Low Pass Crossover: 32Hz-320Hz
• High Pass Crossover: 32Hz-320Hz
• Waterproof sheath RCA Input
• Frequency Response: 20Hz-22KHz
• Signal to Noise Ratio:  (1 Watt into 4 Ohms) =80dB
• Input Sensitivity: 0.2V-6V
• Speaker level Input Sensitivity: 0.5V-15.5V
• Stereo Separation: =50dB
• Fuse Rating: 35A
• Dimensions (Inches): 8.66" L x 3.74" W x 1.73" H
• High-Speed MOSFET Power supply
• Status Mode LED Indicator
• Waterproof Grade: IP65