Package Includes:

• (1) KICKER 48KXMA5004 500 Watt 4-Channel Marine Boat Amplifier Class D Amp KXMA500.4
• (2) Pair Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles

---

Description:

KXMA Amps are built for the outdoors. Gain, crossover and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls.

Real Marine™
The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine."

KXMA500.4 Marine Amplifier
KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center.

Features:

• Class D Amplifier
• Gain Control With "Gain Match" LED Indicator
• FIT2™ (Fail-safe Integration Technology) Circuitry
• Variable 24dB Crossover
• DSP-Controlled Preamp
• KickEQ™ 6dB Variable Bass Boost
• ABYC/NMMA-Compliant Power Terminals
• Conformal-Coated Circuit Boards
• Easy Access to Settings behind Gasket-Sealed Cover Panel
• Black Anodized Aluminum Chassis
• Top-Mounted, Teal LED Light Pipe
• Stainless-Steel Mounting Hardware Included

Specifications:

• POWER [watts/ch], 2 OHM STEREO: 125 x 4
• POWER [watts/ch], 4 OHM STEREO: 75 x 4
• POWER [watts/ch], 4 OHM BRIDGED MONO: 250 x 2
• DYNAMIC POWER [watts]: 700
• FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
• INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
• SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
• KickEQ™ BOOST: Variable 0-6dB, centered @ 40Hz (Only on amp 2)

ACTIVE CROSSOVER

• (amp 1) 24dB/octave, variable 10-5kHz w/ 10x switch, selectable high pass, low pass or all pass
• (amp 2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-5kHz w/10x switch, selectable high pass, low pass, all pass or band pass
• DIMENSIONS [in] all models 2-1/8H x 8-5/16W x _ L: 11-3/16
• DIMENSIONS [cm] all models 5.4H x 21.0W x _ L: 28.4

---

All About RKL65MBW:

How To Install Kick Panel Speaker Pods In A UTV:

Includes:

• Pair of 6.5" Marine LED Speakers
• 16.4 feet of Speaker Wire
• Stainless Steel Mounting Screws
• Black and White Grills Included

Features:

• Pair Rockville RKL65MBW 6.5" 2-Way 700 Watt Marine Boat Speakers with LED Lights
• CEA Compliant Power Ratings
• True Coax Design With the Tweeter Completely Separated From the Cone
• Larger Cone Surface Area Gives Better Mids and Lows
• Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
• True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
• Power Rating: 350 Watts Peak/85 Watts RMS Per Speaker
• Total Power: 700 Watts
• Beat sync LED's flash to the rhythm of the music
• You can select either red or blue color LED's on the wire harness
• No extra installation for the LED. It gets a power signal through your speaker wire
• The louder the music the more intense the LED's flash
• Black and White detachable Grills
• Fully Marinized Against Salt & Fresh Water Conditions
• UV treated cone makes this completely Waterproof and rustproof
• Anti-corrosion Stainless Steel Terminals
• Molded ABS plastic for amazing sound and protection from the elements while out on the water
• Polypropylene Formed Cone
• 10 Oz Y30 top of the line magnet supports high power handling
• Rubber Surround
• High quality ferrite magnet
• 1" inch Polymer Tweeter
• Oversized 1" CCAW Kapton Voice Coil
• Pre-installed Stainless-Steel mounting screws included
• Perfect for Marine, Car, ATV and UTV applications
• Impedance: 4-Ohm
• Frequency Response: 35Hz - 20KHz
• Sound Pressure Level: 90dB @ 1w/1m
• Total Diameter: 7.3"
• Cutout Diameter: 5.6"
• Total Height: 3.86"
• Mounting Depth: 2.56"