Package Includes:

• (1) KICKER 45L7R124 12" 1200 Watt L7R Car Subwoofer, Solo-Baric Sub L7R124 DVC 4-ohm
  
• (1) MTX 12" Vented Subwoofer Enclosure For Kicker Solo Baric L7 L7S L7R Sub Box
  
• (1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades
  

---

Authorized Kicker Dealer!

 

What's In The Box of 45L7R124:

• (1) 12" Subwoofer
• (1) Owner's Manual
• (2) Kicker Stickers

Description:

The 12-inch L7R Square Subwoofer moves more air and delivers bigger bass, so you get more bump out of every watt! The engineers at KICKER HQ designed the L7R to give you more bass than a circular sub, without a larger enclosure. Welcome to the world of square sub perfection!

Features:

• KICKER 45L7R124 12" 1200 Watt L7R Car Subwoofer, Solo-Baric Sub 4-Ohm
• RMS Power Handling: 600 Watts
• Peak Power Handling: 1200 Watts
• Frequency Response: 35 Hz - 21 kHz
• Dual Four-Ohm Voice Coil
• Wrap Around Gasketing
• Patented Ribbed Corners
• Injection-Molded SoloKon Woofer
• 360-Degree Back Bracing
• UniPlate Back Plate And Pole Piece
• Bumped Back Plate
• Thick Tinsel Leads
• Large Ceramic Magnet
• Steel Basket With Spoke Design
• Nickel Plated Speaker Terminals
• Sensitivity: 86.7 dB
• Impedance: 4-Ohms
• Mounting Depth: 6.88" inches
• Mounting Diameter: 11.06" inches
• Minimum Sealed Box Volume: 0.88 cubic feet
• Maximum Sealed Box Volume: 2.0 cubic feet
• Minimum Vented Box Volume: 1.75 cubic feet
• Maximum Vented Box Volume: 3.25 cubic feet

---

Features of BS112V:

• 1.75 Cubic Foot Volume per Chamber
  

Specifications:

• Subwoofer: Single 12"
  
• Height: 15.25"
  
• Width: 20.25"
  
• Subwoofer Mounting Depth: 10.25"
  
• Enclosure Volume: 1.75 cu ft
  
• Weight: 41 lbs

---

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.