- (1) Pair of Kicker 45KM654 6.5" 390w Marine Boat Speakers KM65 w/Charcoal+White Grilles
- (1) MTX WET75.2 200 Watt 2-Channel Marine Amplifier Amp For Boat/ATV/UTV/RZR/Cart
- (1) Rockville RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
Authorized Kicker Dealer!
What's In The Box:
- (2) 6.5" 4-Ohm Coaxials
- (8) Mounting Screws
- (8) Mounting Screw Clips
- (2) Wire Connection Cover
- (2) Zip Ties
Description of 45KM654:
They’re loud. They’re clear. They’re nearly indestructible! The KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Features:
- Pair KICKER 45KM654 6.5" 390W Marine Speakers KM65 with Charcoal + White Grilles
- RMS Power Handling: 65 Watts
- Peak Power Handling: 195 Watts
- Sensitivity: 90 dB
- Four-Ohm Voice Coil
- 3/4-Inch Titanium Tweeter
- UV-Treated Polypropylene Woofer With Santoprene® Surround
- UV-Resistant Polymer Basket
- Locking/Sealed Terminal Cover
- Sealed Motor Structure
- 316L Stainless Mounting Hardware Included
- Charcoal and White Grilles Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
- Frequency Response: 35 Hz - 21 kHz
- Impedance: 4 Ohms
- Mounting Hole Diameter: 5.125" inches
- Mounting Depth: 2.875" inches
Click here for the Owner's Manual
Description of WET75.2:
Rocking The Ride
WET Series amplifiers from MTX Audio are designed to deliver all the
power your system needs whether they are being used on a boat, bike or
off-road vehicle. The WET75.2 is a 2-channel full range amplifier. This
rocking amp is capable of producing up to 200W total RMS power, 100
watts per channel. The unit features a a class A/B circuit design that
delivers exceptional sound quality and small chassis with an extruded
heat sink that effectively dissipates heat ensuring long play times
Marine Hardened
It also incorporates a surface mount design, which attaches critical parts more
securely to the circuit board creating greater resistance to vibration which is
very important in boat and off-road applicaitons. This amplifier features a
conformal coated circuit board making it resistant to moisture that may get into
the the chassis. Other features include stainless steel hardware, rubber gaskets
around interconnects, and plastic covers that cover the controls preventing
moisture from getting into the amplifier.
Features:
- MTX WET75.2 200 Watt 2-Channel Class A/B Marine Amplifier for Boat/Marine
- RMS Power Output @ 2 Ohms: 100 Watts x 2 Channel
- RMS Power Output @ 4 Ohms: 75 Watts x 2 Channel
- Signal to Noise Ratio: 80dB
- Topology: Class A/B
- THD: <1.0%
- Crossover: Variable Low @ 10 Hz to 200 Hz (12dB/Oct)
- Bass Boost: 0dB, 6dB, 12dB Switchable
- Max Sensitivity: 200mV
- Maximum Input Signal: 5V
- Weather Resistant: IP55 Rating
- Surface Mount PCB Design: Decreases chassis size, improves layout efficiency and increases vibration resistance without sacrificing performance or sound.
- Conformal Coated Circuit Board: Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions
- Variable Butterworth Crossover: A 12dB/Oct crossover that allows you to set the frequency your speakers will play down or up to
- Stainless Steel Hardware
- Rubber Gaskets Around RCA Connectors
- Plastic Cover Over Control Adjustments
- Triple Protection Circuitry: A Thermal, DC Offset, and Short Circuit Protection circuitry ensures the amplifier will protect itself in the event of a problem
- Product Dimensions (H x W x D): 2.25" x 7.88" x 6.38" inches
Click here for the Owner's Manual
Video of RMWK:
Features:
- Rockville RMWK8 8 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned Oxygen Free 100% Copper Flexible PVC RCA Cable
- 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to Better Resist Chemicals in the Battery Compartment
- 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge Tinned Oxygen Free 100% Copper, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1 Silver Mini-AGU Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1 50A Mini-AGU Fuse
- 2 Rust Resistant Ring Terminals
- 2 Rust Resistant Spade Terminals
- 5 Rust Resistant Speaker Cable Terminals
- 1 Rust Resistant Washer
- 10 White Cable Ties
Owner's manual
- UPC:
- 613815846550
