- (1) Pair of Kicker 45KM654 6.5" 390w Marine Boat Speakers KM65 w/Charcoal+White Grilles
- (1) Pair of Rockville MAC65B 6.5" Black Aluminum Wakeboard Tower Speaker Pod Enclosures
- (1) MTX WET75.2 200 Watt 2-Channel Marine Amplifier Amp For Boat/ATV/UTV/RZR/Cart
- (1) Rockville RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
Authorized Kicker Dealer!
What's In The Box:
- (2) 6.5" 4-Ohm Coaxials
- (8) Mounting Screws
- (8) Mounting Screw Clips
- (2) Wire Connection Cover
- (2) Zip Ties
Description of 45KM654:
They’re loud. They’re clear. They’re nearly indestructible! The KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Features:
- Pair KICKER 45KM654 6.5" 390W Marine Speakers KM65 with Charcoal + White Grilles
- RMS Power Handling: 65 Watts
- Peak Power Handling: 195 Watts
- Sensitivity: 90 dB
- Four-Ohm Voice Coil
- 3/4-Inch Titanium Tweeter
- UV-Treated Polypropylene Woofer With Santoprene® Surround
- UV-Resistant Polymer Basket
- Locking/Sealed Terminal Cover
- Sealed Motor Structure
- 316L Stainless Mounting Hardware Included
- Charcoal and White Grilles Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
- Frequency Response: 35 Hz - 21 kHz
- Impedance: 4 Ohms
- Mounting Hole Diameter: 5.125" inches
- Mounting Depth: 2.875" inches
Click here for the Owner's Manual
Video of MAC65B:
Includes:
- 2 Wakeboard Cans
- All mounting hardware
- (2) 2.375" rubber inserts
- (2) 2.25" rubber inserts
- (2) 2.5" rubber inserts
- (2) 2" rubber inserts
Description:
Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC65B comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter. Six precision molded high impact rubber inserts guarantee fitment on towers from 2" to 2.5". Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!
These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC65B features a black powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading. They are fully marinized which means they'll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!
The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.
Features:
- Pair of Rockville MAC65B black aluminum can wakeboard tower enclosures
- Made of high quality 6061 aircraft grade aluminum
- Beautiful black powder-coat finish
- 100% waterproof and fully marinized against salt and fresh water conditions
- Internally wired for clean install-no exposed wires or terminals
- High efficiency design features the perfect airspace for 6.5" speakers
- Rugged universal mounting clamps made of 6061 aluminum
- Includes precision molded, high impact plastic inserts for tower fitment from 2" diameter to 2.5" diameter
- Mounting Depth - 6.7"
- Total Depth - 9.15"
- Cutout - 5.55"
- Diameter - 7.39".
- Mounting diameter - 6.4" (Narrow diameter - 6.12")
- Height of mount - 3.75"
- Total height of unit - 11"
*Although the pre-drilled holes will accommodate most speakers on the market, there may be some that don't fit. If that is the case you can drill holes into the lip of the can to line up with your speaker's mounting holes.
Description of WET75.2:
Rocking The Ride
WET Series amplifiers from MTX Audio are designed to deliver all the
power your system needs whether they are being used on a boat, bike or
off-road vehicle. The WET75.2 is a 2-channel full range amplifier. This
rocking amp is capable of producing up to 200W total RMS power, 100
watts per channel. The unit features a a class A/B circuit design that
delivers exceptional sound quality and small chassis with an extruded
heat sink that effectively dissipates heat ensuring long play times
Marine Hardened
It also incorporates a surface mount design, which attaches critical parts more
securely to the circuit board creating greater resistance to vibration which is
very important in boat and off-road applicaitons. This amplifier features a
conformal coated circuit board making it resistant to moisture that may get into
the the chassis. Other features include stainless steel hardware, rubber gaskets
around interconnects, and plastic covers that cover the controls preventing
moisture from getting into the amplifier.
Features:
- MTX WET75.2 200 Watt 2-Channel Class A/B Marine Amplifier for Boat/Marine
- RMS Power Output @ 2 Ohms: 100 Watts x 2 Channel
- RMS Power Output @ 4 Ohms: 75 Watts x 2 Channel
- Signal to Noise Ratio: 80dB
- Topology: Class A/B
- THD: <1.0%
- Crossover: Variable Low @ 10 Hz to 200 Hz (12dB/Oct)
- Bass Boost: 0dB, 6dB, 12dB Switchable
- Max Sensitivity: 200mV
- Maximum Input Signal: 5V
- Weather Resistant: IP55 Rating
- Surface Mount PCB Design: Decreases chassis size, improves layout efficiency and increases vibration resistance without sacrificing performance or sound.
- Conformal Coated Circuit Board: Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions
- Variable Butterworth Crossover: A 12dB/Oct crossover that allows you to set the frequency your speakers will play down or up to
- Stainless Steel Hardware
- Rubber Gaskets Around RCA Connectors
- Plastic Cover Over Control Adjustments
- Triple Protection Circuitry: A Thermal, DC Offset, and Short Circuit Protection circuitry ensures the amplifier will protect itself in the event of a problem
- Product Dimensions (H x W x D): 2.25" x 7.88" x 6.38" inches
Click here for the Owner's Manual
Video of RMWK:
Features:
- Rockville RMWK8 8 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned Oxygen Free 100% Copper Flexible PVC RCA Cable
- 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to Better Resist Chemicals in the Battery Compartment
- 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge Tinned Oxygen Free 100% Copper, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1 Silver Mini-AGU Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1 50A Mini-AGU Fuse
- 2 Rust Resistant Ring Terminals
- 2 Rust Resistant Spade Terminals
- 5 Rust Resistant Speaker Cable Terminals
- 1 Rust Resistant Washer
- 10 White Cable Ties
Owner's manual
- UPC:
- 613815846598
