Package Includes:

• (1) Kicker 8" Car Audio Subwoofer
• (1) Rockville 8" Vented Solo Baric L7/L5/L3 Sub Enclosure
• (1) Rockford Fosgate Prime R500X1D 500 Watt RMS Mono Car Audio Class D Amplifier/Amp
• (1) Rockville RWK41 4 Gauge Complete Wire Kit with RCA's
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

---

Authorized Kicker Dealer!

Description for Kicker Sub:

Square Matters
The Solo-Baric's cutting-edge, square-sub design means more cone area, more air displacement and more volume than a round woofer.

Features:

• Kicker L7S84 8" 900 Watt Solobaric L7S Car Audio Subwoofer Solo-baric 44L7S8-4
• Dual Four-Ohm Voice Coils
  
• Injection-Molded Polypropylene Cone
  
• Patented Corner Ribs Minimize Distortion
  
• SoloKon™ 360-Degree Back Bracing
  
• Ribbed Santoprene Surround With Blue Surround Stitching
  
• UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
  
• Thick Tinsel Leads
  
• Large Ceramic Magnet
  
• Cast Aluminum Basket
  
• Satin-Nickel Plated, Spring-Loaded Speaker Terminals
  
• The Solo-Baric L7S 8-Inch Subwoofer works best with a sealed or ported enclosure and 450 watts of recommended power. See below for more details.
  

Specifications:

• Size: 8" (20.32 cm)
  
• Impedance: 4 Ohm DVC
  
• Max Rec Amplifier Power: 900 Watts Peak / 450 Watts RMS
  
• Sensitivity: 83.6 dB 1w/1m
  
• Frequency Response: 28 Hz -100 Hz
  
• Mounting Depth: 4-3/4" (12.1 cm)
  
• Mounting Cutout, Square: 7-1/4" (18.4 cm)
  
• Min Rec Sealed Box Volume: 0.33 cu. ft.(9.4 liters)
  
• Max Rec Sealed Box Volume: 0.75 cu. ft. (21.2 liters)
  
• Min Rec Vented Box Volume: 0.66 cu. ft. (18.6 liters)
  
• Max Rec Vented Box Volume: 1.0 cu. ft. (28.3 liters)
  
• What's in the box: One 8-inch subwoofer; one owner’s manual

---

Description of R500X1D:

CEA 2006
CEA Compliant ensures speakers and subwoofers perform the ratings given, Rockford Fosgate is CEA Compliant and performs to their strict standards.

Features:

• Rockford Fosgate Prime R500X1D 500 Watt RMS Mono Block Class D Car Amplifier
• 12dB/octave Butterworth crossover
• RCA pass-thru outputs
• On-board Punch EQ with +18dB boost @ 45Hz.
• High level inputs
• Remote PLC (Punch Level Control)
• 0°/180° Phase Switch
• Real time output and power supply thermal sensing
• Cast aluminum heatsink
• 4 Gauge power/ground connectors
• MOSFET power supply
• Over current protection
• Short circuit protection
• Muted turn on

Details:

• CEA-2006 Compliant
• Number of Channels: 1
• Rated Power (RMS Continuous Power): 250 Watts x 1 @ 4-Ohms
• 500 Watts x 1 @ 2-Ohms
• Total Power
• (Sum of Rated Power): 500 Watts RMS
• Dynamic Power
• (PVC/PowerCube® Measurement):
• Bridgeable: No
• Efficiency (average): 85% @ 4-Ohm 85% @ 2-Ohm
• Crossover Controls: Low-Pass (LP): 50Hz to 250Hz @ 12dB/octave Butterworth
• Tone Controls: Punch Bass: 0dB to +12dB @ 45Hz
• Phase Control: Variable 0° to 180°
• Signal Input: Low Level: 1 RCA Pair
• Signal Output: Low Level: 1 RCA Pair
• Power Input Connector: Screw Terminal
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Screw Terminal
• Speaker Wire Gauge: 8 AWG
• Heat Sink Type: Extruded Aluminum
• Cooling: Convection
• Remote Controls: Punch Level Control: When connected is linked to "gain control" to provide remote output level
• Visual Indicators: Power Protect
• Circuit Topology Class: Class-D
• Frequency Response: 20Hz to 250Hz +/-1dB

---

Video of RWK41:

Unboxing Video for RWK41:

Authorized Rockville Dealer!

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

---

Description for Rockville Enclosure:

The RSVK8 single 8" vented sqaure speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made specifically to match the recommended specifications for the Kicker Solo Baric L5 and L7 subwoofers. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RSVK8 Single 8" Vented .66 Cu. Ft. Subwoofer Enclosure
• Specifically Designed For The Kicker L7/L5/L3 Series Subwoofers and Similar Square Subwoofers
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Vented
• Enclosure Sub Size: Single 8"
• Dimensions in Inches: 12" Width x 12" Depth x 10.5" Height
• Top and Bottom Depth: 12"
• Mounting Depth: up to 11.375" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 0.875 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): .66 Cubic Feet

---

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.