- (1) Kicker 15" Car Subwoofer Sub
- (1) Rockville Single 15" Vented Car Sub Enclosure Box 3.51 Cu Ft, 3/4" MDF
- (1) Hifonics Brutus BRX1516.1D 1500 Watt RMS Class D Mono Amplifier Car Amp
- (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Wire Kit OFC
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Authorized Kicker Dealer!
Description for Kicker Sub:
High-temp dual voice coils deliver the power, while a solid pole piece provides more mass to subdue additional heat. A T-cut top plate creates a wider magnetic field for stronger bass response, and better sound. It all comes together to form a super-reliable motor structure found only in a KICKER subwoofer. The CompVX 15-Inch Subwoofer works best with a sealed or ported
enclosure and 1000 watts of recommended power.
Features:
- Kicker 44CVX152 Comp VX CVX 15" 2000 Watt Car Subwoofer Sub CVX15-2 44CVX15-2
- Dual Two-Ohm Voice Coils
- Thick Polypropylene Cone
- Signature Double Blue Surround Stitching
- Ribbed Santoprene Surround
- SoloKon Cone Reinforcement
- Oversized Suspension System
- High-Strength Insulated Tinsel Leads
- High Temp Voice Coil
- Perimeter Venting for Thermal Management
- Massive Ceramic Magnet
- UniPlate Extended Pole Piece & Backplate For Superior Heat Dissipation
- Cast Aluminum Basket
- Satin Nickel Spring-Loaded Speaker Terminals
Specifications:
- Size: 15" (38 cm)
- Impedance: 2 Ohms DVC
- Power Handling: 2000 Watts Peak, 1000 Watts RMS
- Sensitivity: 91.6 dB 1w/1m
- Frequency Response: 18 Hz -500 Hz
- Mounting Depth: 8-1/2" (21.5 cm)
- Mounting Cutout: 13-13/16" (35 cm)
- Min Sealed Box Vol: 1.8 cu. ft (51.0 L)
- Max Sealed Box Vol: 5.2 cu. ft (147.0 L)
- Min Vented Box Vol: 3.0cu. ft (85.0 L)
- Max Vented Box Vol: 5.0 cu. ft (142.0 L)
- What's in the box: one 15-inch subwoofer, one owner's manual, two stickers
Features of BRX1516.1D:
- Hifonics Brutus BRX1516.1D 1500 Watt RMS Class D Mono Block Car Amplifier+Bass Remote
- Power Output: 1500 Watts x 1 Channel @ 1 ohms
- Power Output: 900 Watts x 1 Channel @ 2 ohms
- Power Output: 550 Watts x 1 Channel @ 4 ohms
- Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
- LED power (green) and protect (red) indicators
- Built-in system diagnostics
- Preamp RCA outputs to daisy chain multiple amps
- Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
- Lighted connectors and blue wash of light from the underside of the heatsink
- DC, Short Circuit, Thermal and Overload Protection
- Frequency Response: 10Hz-50KHz
- Signal to Noise Ratio: >95dB
- Bass Boost 0-10dB
- RCA Input
- Fuse: 70A Maxi x 2
- Bass Remote included
- THD: <0.10%
- Variable subsonic filter (15-35 Hz)
- Variable low-pass filter (35-250 Hz)
- Dimensions: 12.5"L x 2.4"W x 9.8"H
Video of RWK4CU:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits
on the market from Kicker, JL Audio, or any other top brands.
Maximum Power!
Looking for a wire kit that has 100% true specifications? A wire kit
that uses 100% copper 4-gauge cable? Then look no further than the
Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation
Kit. This package includes everything you'll need to get your amplifier
system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.
The power and ground cables aptly named “Mega Power Cable” is a no
compromise power cable. Rockville’s engineering team over-built and
designed the cables using thousands of strands of only true 100%
oxygen-free, silver-tinned copper strands. The use of a proprietary
special twisting process reduces “surface skin impedance loss” so that
Mega Power cables have zero signal and power loss, delivering full power
from your battery system to your amplifier even at lengths of 20 feet!
The increased current flow and higher amperage carrying capacity will
increase your amplifiers efficiency and keep your amplifier running
cooler. The SuperFlex outer insulating jacket jacket makes installation
and cable routing simple and easy. The 100% copper stranded wire is
extremely tolerant of the hostile conditions found under the hood in
vehicles and compensates for vibration, heat expansion and flexibility.
This flexible and well-shielded wire is crucial for getting through all
of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum
to give their cables the appearance of a “heavy-duty” cable. But not
Rockville, our True-Spec 100% oxygen free, silver tinned copper
eliminates corrosion, increases current transfer x 10, and won’t
discolor over time.
The superior quality and materials of the Rockville 100% True-Spec
amplifier installation kit is realized in the included accessories and
cable workmanship. Included is a precision CNC cut full size ANL fuse
housing, machined from solid brass and then 14K gold plated for superior
signal transfer and complete with a matching gold plated 120-amp ANL
fuse. The power cable is wrapped in 6 feet of durable nylon braided
tubing to protect it from heat and chafing in the engine compartment.
All installation accessories such as the ring terminals and spade
connectors are nickel plated for superior signal transfer and
durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also
manufactured from 100% copper and woven in to a flat planner design and
coated in our Super-Flex insulation so that it fits under and around
your vehicles trim and carpet smoothly and without bulking up. With
crystal clear sound quality these speaker cables deliver true audio
fidelity from your car audio amplifier to your speakers. The 14-gauge
speaker cable included in the 4-gauge kit can handle over 2000 watts of
power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and
best looking RCA cables available today. Each channel in the RCA cable
is triple shielded first with dielectric internal insulators and then
with a 98% coverage woven shield. All cables are manufactured of 100%
oxygen free copper and feature twisted pair technology for superior
noise rejection and pure sonic signal flow. The RCA plugs are shielded
metal and feature a spiral cut outer ground ring with center split pin
for precise and tight audio connections. The result of all this
technology is noise free-noise rejection signal transfer for optimum
sound quality. You will hear the difference these RCA signal transfer
cables will make.
- Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
- 4 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 1862
- BC-5W2 Compliant
- 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 4 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 14 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One Mini ANL Fuse Holder with 120 amp ANL fuse
- One 1/2“ black rubber firewall grommet
- One 4 gauge spade terminal
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 4 gauge ring terminal
- Ten 6” black zip ties
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely that you will need to use it.
Description for Rockville Enclosure:
The RGV15 single 15" vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RQV15 Single 15" Vented/Ported Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Enclosure Measurements:
- Type of Enclosure: Ported
- Enclosure Sub Size: Single 15"
- Dimensions in Inches: 17" L x 28" W x 17H"
- Top and Bottom Depth: 17"
- Mounting Depth: up to 12.5" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 4.6 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 3.51 Cubic Feet
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815912507
