Package Includes:

• (1) Pair of Kicker 43DSC6504 6.5" 2-Way Car Stereo Speakers Totaling 240 Watt
• (1) Rockville Rockmat RM2 Sound Dampening Speaker Deadening Kit (2) 12" x 12" Sheets

---

Audiosavings can only ship Kicker products to the United States.  Sorry, but we can not ship Kicker to Canada or United Kingdom.

Description of 43DSC6504: 

The DS 6-1/2-Inch Coaxial Speakers are the ideal upgrade for your car doors.

Using zero protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. A stamped steel framework supports a ribbed, UV-treated foam surround and rigid polypropylene cone with EVC™ (Extended Voice Coil) technology, for the best sonic quality.

These DS speakers work best with 60 watts of recommended power.

Features:

• Pair Kicker 43DSC6504 DSC650 6.5" 240 Watt 2-Way Car Stereo Speakers 4-Ohm
  
• 240 Watts Peak Power
  
• 60 Watts RMS Power
• Polypropylene midwoofer
  
• Acoustic-foam surround
  
• 1/2" Polyethylene-Naphthalate Dome Tweeter
• Stamped steel basket
• EVC (Extended Voice Coil) technology, for excellent sound - even with a factory radio
• Neodymium tweeter magnet
• Grilles included
  
• 4 ohms impedance
  
• Frequency Response: 40-20,000 Hz
  
• Top-mount Depth: 1-11/16"
• Mounting Diameter: 4 13/16"
  
• Sensitivity: 90dB
  

---

Videos Of RM2:

 

 

Includes:

• 2 Sheets of Rockmat Sound Dampening Material (12” x 12”)

The Rockville Rockmat RM2 sound dampening material is a must have for any car audio speaker install. We all love a good car stereo, but nothing is worse than hearing things rattle. Our Rockmat RM2 speaker package is the perfect solution to eliminate unwanted noises. This package includes 2 sheets that are each 12” x 12” inches per sheet. Installation is quick and easy! You simply cut a hole out of the middle of each sheet and place the Rockmat around your speaker installation area. Another installation option is to cut the 12 x 12 sheet in half and then cut a half circle into each half then install one sheet on each side of each speaker.

Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.

Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum.  Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. The other products on the market like most of the GTMAT series for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of 100% butyl rubber and an aluminum heat resistant shield which is the same as many of the more expensive brands out there that sell for twice our price.. We only make top quality gear over here at Rockville! These are comparable to the ONYX series by GTMat. (Only we sell it for the price of their lower series!).

Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.

We make all our models in 2 color options. You get the choice of black and silver. We decided to also keep the look very clean! We see all these other brands tattooing their logos all over the material. I always thought it looked stupid. So I made sure to keep our Rockmat with a clean look to it.

Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!

To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!

Features:

• Rockville Rockmat RM2 Sound Dampening Speaker Deadening Kit (2) 12" x 12" Sheets
  
• Easiest installation!
  
• Tested to work better than leading brands of sound dampening
  
• Paintable Surface
  
• Speaker kit for (2) speakers (Each speaker requires 2 sheets)
  
• Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by eliminating sound leakage!
  
• Kill unwanted noise, rattles, vibrations
  
• Aluminum-coated for heat-resistance
  
• 72mil thickness
  
• Increased flexibility
  
• High tack permanent self-adhesive to make your installation quick and easy!
  
• Our model has new and improved increased flexibility for an easier installation and top sound quality!
  
• Permanent installation with ability to withstand even the highest temperatures!
  
• Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
  
• Sticks to any surface
  
• Designed and engineered by Rockville USA!
  
• Manufactured with the newest state-of-the-art machinery. We use only the purest raw materials as well!
  
• Every product is checked during production for consistency. We have very high quality standards!
  
• We use 100% high quality butyl rubber which gives amazing sound insulation and shock absorption (we do not use any asphalt in our product!)
  
• Available in both black and silver
• Dimensions per sheet:  12" inch Length x 12" inch Width x 0.07' sheet Depth
  
• Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum
  
• Reduces unwanted noises 5-8 dB
  
• Adhesive temperature range of -100F to 300F (-60C to 150C).
  
• High-Tack Self-adhesive
  
• Material Color: (Silver)
  
• Weight: 1.32 Lbs.
  
• Unit Dimensions: 12.4” x 12.4” x 0.47”

Owner’s Manual