Package Includes:

• (1) Kicker 43DCWR122 COMPR12 2000W Dual 12" Car Subwoofers
  
• (1) Rockford Fosgate R1200-1D 1200 Watt RMS Mono Amplifier
• (1)  Rockville RWK21 2 Gauge Amp Installation Kit with RCA Cable

---

 Authorized Kicker Dealer!

Description of 43DCWR122: 

The CompR Dual 12-Inch Subwoofer Enclosure is the easiest way to get legendary bass in your ride. Black carpeting gives the enclosure a new level of refinement, while the front-facing tuned port raises the bar for acoustic efficiency, creating incredible bass levels. The CompR Subwoofer Enclosures make surprisingly strong, smooth bass in a box under seven inches deep. The CompR Dual 12-Inch Subwoofer Enclosure works best with 1000 watts of recommended power.

Features:

• Type: Dual
• No. Of Woofers: 2
• Power Handling:
  .....2000 Watts Peak
  ......1000 Watts RMS
• Recommended power range: 500 - 1000 RMS
• Size (in, cm): 12, 30
• Impedance (Ohms): 2
• Dual Voice Coil
• Polypropylene Cone
• Ribbed Santoprene® Surround
• Spiralead™ tinsel-lead technology
• Stamped Steel Basket
• Brass Spring-loaded Push Terminals
• Double Stacked Magnet
• Frequency Response: 25 - 500Hz
  
• Sensitivity (dB 1w/1m): 98
• Extensive internal bracing
• MDF construction
• Custom Kicker embroidery
• Solid wood enclosure
• Front-facing port
• Box Top Depth (in, cm): 14, 35.6
• Box Bottom Depth (in, cm): 17-1/4,43.8
• Box Height (in, cm): 16, 40.6
• Box Width (in, cm): 32-3/8, 82.3
• Mounting Depth (in, cm): 5-3/4, 14.6
  
• Mounting Diameter (in, cm): 11, 27.9
  
• Min Sealed Box Vol (cu. ft): 1.0
  
• Max Sealed Box Vol (cu. ft): 2.0
  
• Min Vented Box Vol (cu. ft): 1.75
  
• Max Vented Box Vol (cu. ft): 2.25
  

---

 

Features of R1200-1D:

• Variable crossover 12dB/octave slopes
• 4 Gauge power/ground terminals
• Cast aluminum heatsink
• Infrasonic filter
• RCA pass-thru
• Top mounted controls
• Tri-stage protection covers thermal, over-current and short circuits
• On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
• CEA-2006 Compliant

Specifications:

• Number of Channels: 1
• RMS Power Handling:
• 600 Watts x 1 @ 4-Ohms
• 900 Watts x 1 @ 2-Ohms
• 1200 Watts x 1 @ 1-Ohm
• Total Power (Sum of RMS Power): 1200 Watts
• Low-Pass Crossover Controls: Variable 50Hz - 500Hz @ 12dB/Octave
• Tone Controls: 0dB to +12dB @ 45Hz
• Signal Input: Low Level: 1 RCA Pair
• Signal Output: 1 RCA Pair
• Power Input Connector: Block
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Block
• Speaker Wire Gauge: 12 AWG
• Remote Controls: Variable 0dB to +12dB @ 45Hz
• Visual Indicators:
• Power
• Protect
• Circuit Topology Class: Class-D

---

Video of RWK21:

Authorized Rockville Dealer!

Description:

The Rockville RWK21 2 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 2 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (1) sets of RCA cables.

Features:

• Rockville RWK21 2 Gauge Car Amplifier Wiring Installation Kit
• (1)  17' High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 2 Gauge Translucent Blue SuperFlex Power Cables
• 17' 18 Gauge Blue Remote Cable
• 17' 16 Gauge Clear Speaker Wire
• 3' 2 Gauge Clear SuperFlex Ground Wire
• Gold Plated ANL Heat Resistant Fuse Holder
• 150 Amp ANL Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.

Great features and great quality make Rockville a great choice.

RWK21