Package Includes:

• (1) Kicker 43CWRT82 COMPRT8 8" DVC Slim Shallow Car Subwoofer Sub CWRT8-2
• (1) Rockville 8" Sealed Shallow Mount Car Sub Enclosure Box 0.44 Cubic Feet
• (1) Rockville RXD-M0 1200 Watt Peak/300w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

Authorized Kicker Dealer!

Description for Kicker Sub:

The CompRT Eight-Inch Subwoofer is an all-weather thin subwoofer with a pair of 2 Ohm voice coils. With our custom SoloKon™ technology and the CompRT’s unique interior support system, the sub sounds fat – but great design keeps it thin! The CompRT Eight-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power.

The only thing thin about the CompRT® Subwoofer is the mounting depth. Whether it’s on the road, sand or trail, these tough subs work perfectly in nearly anything with a motor.

Features:

• Kicker 43CWRT82 COMPRT8 600 Watt 8" DVC 2-Ohm Car Subwoofer
• Size [in, cm]: 8, 20
  
• Impedance [Ohms]: 2 DVC
  
• Power Handling:
  .....600 Watts Peak
  .....300 Watts RMS
• Recommended Power Range: 150 - 300 RMS
  
• Injection-molded polypropylene cone
  
• Rubber surround
  
• High-temp voice coil for increased power handling
  
• Pair of wire terminals custom designed for shallow mount installations
  
• Weather-proof for outdoor powersports applications
  
• Double venting for max cooling
• SoloKon™ technology
• Frequency Response: 30-500 Hz
  
• Sensitivity [dB 1w/1m]: 81.8
  
• Mounting Depth [in, cm]: 2-11/16, 6.7
  
• Mounting Diameter [in, cm]: 7, 17.7
  
• Min Sealed Box Volume [cu. ft, L]: 0.2, 5.66
  
• Max Sealed Box Vol [cu. ft, L]:1.0, 28.32
  
• Min Vented Box Vol [cu. ft, L]:0.8, 22.7
• Max Vented Box Vol [cu. ft, L]: 1.2, 34

Advantages of purchasing from an authorized seller:

• Best prices - We sell all Kicker Products at great prices
  
• Full Factory Warranty
  
• Lifetime Customer Service by Kicker product experts
  
• Guaranteed legitimate and authentic merchandise
  

Please note: If you purchase Kicker from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Videos of RXD-M0:

Description:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXD-M0 is a mono amplifier with 1,200 watts peak output and 300 watts Dyno Certified power.Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXD-M0 features a Maxi fuse with a rating of 50 Amps. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXD-M0 you are getting your money’s worth and then some.

This unit also features a high speed MOSFET power supply and studio-grade bipolar output stage transistors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The RXD-M0 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

The RXD mono amplifiers took years of engineering. A lot of new technology went into these amps. We call this technology optical coupler Class-D. This new technology gives the amplifier punchier bass compared with a typical class “D” amp. A major difference in our OC technology is the preamp input stage and output stage are separated in circuitry. It is less susceptible to noise, which typically is picked up from the preamp input. The RCA input accepts both balanced and un-balance inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise.

The Phenom amps by Rockville use only the top parts. We use Siemens correction capacitors which are well-known for producing crystal clear sound quality. We use TL072 OP (power supply) which is composed of mosfets. Typical class “D” amps use JRC4558, which is composed of transistors only. Mosfet power supplies have a higher speed, lower loss rate, lower noise, and ultimately supply more efficient and clean power along with lower THD (distortion). We redesigned the layout of the PCB boards to allow the amp to run smooth and cool. Each and everything amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and do random inspections of the power and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90-day money back guarantee. This means if for any reason you want to return the amplifier back and get a full refund we will send you a label and take the amp back and give you all your money back. (Amp must be complete along with the box).

Features:

• Rockville RXD-M0 1200 Watt Peak/300w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • 1 Ohm : 300 Watts x 1 Channel <1% THD+N
  • 2 Ohm : 200 Watts x 1 Channel <1% THD+N
  • 4 Ohm : 150 Watts x 1 Channel <1% THD+N
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  • 1 Ohm : 1200 Watts x 1 Channel
  • 2 Ohm : 800 Watts x 1 Channel
  • 4 Ohm : 600 Watts x 1 Channel
• High-Speed MOSFET Power Supply
• Optical Coupler Class “D” Technology
• Studio-Grade Bipolar Output Stage Transistors
• Now exclusively with “Professional Peak Limiter Circuitry” which guarantees distortion free musical playback at all levels.
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Low Pass Filter : 50Hz - 250Hz
• Subsonic Filter : 15Hz - 55Hz
• Phase Control Switch
• Full IC-Controlled Protection Circuitry
• Remote Dashboard Subwoofer Control
• Fully Adjustable 12dB Bass Equalizer
• Mute and Delay Soft Start System
• RCA Preamp Line Output
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• Minimum THD at Rated Power : < 0.05%
• S / N Ratio : >100dB
• Frequency Response : 10Hz - 500KHz
• Damping Factor : > 200 @ 100Hz
• 50 Amp Maxi Fuse
• Dimensions : (W x H x L) 9.5" x 2" x 8.75"

Owner’s Manual

Description for Rockville Enclosue:

The RSST8 single sealed 8" shallow mount speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

Features:

• Rockville RSST8 Single 8" .44 cu. ft. 3/4" MDF Sealed Shallow/Truck Subwoofer Enclosure Box
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• Designed For 8" Shallow Mount Subwoofers
• Machine precision cut mounting holes
• ¾” USA Heavy Duty MDF Construction
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work perfectly with high powered subs
• Designed to give the best sound quality

Enclosure Measurements:

• Type of Enclosure: Sealed Shallow
• Enclosure Sub Size: Single 8"
• Dimensions in Inches: 15.5" x 7.25" x 5" x 11"
• Top Depth: 5"
• Bottom Depth: 7.25"
• Mounting Depth: up to 3.3" (enough depth for any shallow sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 0.59 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 0.44 Cubic Feet

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secu re, and to run the audio signal cleanly.

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets