Package Includes:

• (1) Kicker 12" Shallow Car Subwoofer
• (1) Rockville Single 12" Vented 1.6 Cu Ft Car Sub Enclosure Box 3/4" MDF
• (1) Hifonics Zeus ZXX-1200.1D 1200W Mono Block Class D Car Audio Amplifier
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

Authorized Kicker Dealer!

Description for Kicker Subs:

The CompRT 12-Inch Subwoofer is an all-weather thin mount subwoofer with a 2 Ohm dual voice coil design for superior wiring flexibility. The CompRT is designed for the sound quality audiophiles want, with the weatherproof performance powersports enthusiasts need. The CompRT 12-Inch Subwoofer works best with a sealed or ported enclosure and 500 watts of recommended power.

The only thing thin about the CompRT® Subwoofer is the mounting depth. Whether it’s on the road, sand or trail, these tough subs work perfectly in nearly anything with a motor.

Features:

• Kicker 43CWRT122 1000W 12" DVC 2-Ohm Car Subwoofer
  
• Size [in, cm]: 12, 30
• Impedance [Ohms]: 2 DVC
• Power Handling:
  .....1000 Watts Peak
  .....500 Watts RMS
• Wire terminals featuring impedance-selector provide installation flexibility
  
• Injection molded polypropylene cone
  
• Santoprene surround
• Added voice-coil clearance for full excursion
  
• High-temperature voice coil wire to allow for high power handling
  
• Quad venting for ultimate cooling
  
• Full-coverage steel basket with minimized mounting depth
• Double stitched surround for enhanced cone-to-surround strength
• Weatherproof performance
• Powerful rear magnet
• Frequency Response: 25-500 Hz
  
• Sensitivity [dB 1w/1m]: 85.5
  
• Mounting Depth [in, cm]: 3-3/4,9.6
  
• Mounting Diameter [in, cm]: 11, 27.9
  
• Min Sealed Box Vol [cu. ft, L]: 0.55, 15.57
  
• Max Sealed Box Vol [cu. ft, L]: 2.0, 56.64
  
• Min Vented Box Vol [cu. ft, L]: 1.75, 49.6
  
• Max Vented Box Vol [cu. ft, L]: 2.25, 63.7

Description for Rockville Enclosure:

The RSV12XL single 12" vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RSV12XL Single 12" 1.6 cu. ft. MDF Vented Subwoofer Enclosure
• Extra Large Enclosure For Large and Powerful Subwoofers
• Single 12" Vented Enclosure
• Machine precision cut mounting holes
• ¾” USA Heavy Duty MDF Construction
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
• Designed to give the best sound quality
• Tuning frequency: 40Hz

Enclosure Measurements:

• Type of Enclosure: Vented/Ported
• Enclosure Sub Size: Single 12"
• Dimensions in Inches: 18" L x 20" W x 14.25" H
• Top and Bottom Depth: 20"
• Mounting Depth: up to 18.5" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.6 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.6 Cubic Feet

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

A classic Hifonics aluminum heatsink with a Zeus 1200 Watt, 1 ohm stable, Class D mono subwoofer car audio amplifier. Features include onboard electronic crossover and boost EQ. Bass remote included.

Features:

• New Hifonics Zeus ZXX-1200.1D 1200W Mono Block Class D Car Audio Amplifier
  
• Pre-Amp Circuitry: Low Noise PreAmplifier - Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
• Inputs: Nickel Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
• Hi Level Inputs: Low Level RCA Inputs and Outputs - Highest sound quality connection
• Operation Mode: Mono mode - Purpose built 1 channel amplifier for driving subwoofers and subwoofer systems
• Class / Topology: Class D - High efficiency with big power in a small footprint
• Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
• Heat Sink: Aluminum - Old School Hifonics Heat sink for Superior Heat Dissipation
• Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
• Bass Remote: Included - Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
• Output Connections: RCA Outputs - Daisy chain multiple amplifier to eliminate additional signal cables from the source unit
• Connections Type : Molded / Angled - Secure connection for all system wires. Angled for ease of access for installation
• Diagnostics: Diagnostic Indicators DC, Short Circuit, Thermal and Overload Protection - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
• Illumination: Illuminated Logo - The Hifonics logo illuminates when the amplifier is powered, making a #PowerFromTheGods statement in the dark

Specifications:

• Class: Class D
  
• Variable Voltage: 6V - 0.2V
  
• Signal to Noise Ratio: >95dB
  
• Frequency Response: 10Hz-300Hz
  
• Crossover Type: Variable Electronic
  
• Low Pass Crossover 12dB Per Octave: 40Hz-300Hz
  
• Bass Boost: 0~12dB
  
• Subsonic Filter: 10Hz-40Hz
  
• Power @ 1-Ohm: 1x1200W
  
• Power @ 2-Ohms: 1x600W
  
• Power @ 4-Ohms: 1x400W
  
• Total Channels: Mono
  
• Audio Inputs: RCA Jack
  
• Audio Outputs: RCA Jack
  
• Power Terminal 12v/GND: 4 gauge
  
• Speaker Terminal Wire Gauge: 12 gauge
  
• Fusing: 80A x 1
  
• Dimensions: 12.6 x 2.4 x 10 inches (32 x 6 x 25.4 cm)
  
• Weight: 8.1 lbs (3.6 kg)