- (1) Kicker 43CWR152 COMPR15 15" 1600 Watt 2-Ohm DVC Car Audio Subwoofer
- (1) Rockville Rockmat RM36-B 36 Sq Ft Butyl Rubber Sound Dampening/Deadening Car Kit
Authorized Kicker Dealer!
Video of 43CWR152:
Description:
CompR takes flexibility to another level with a single pair of stout, push-button wire terminals featuring a convenient impedance-selector slider for easily changing the dual-voice-coil impedance (2/8 Ohms or 1/4 Ohms, depending upon model). No additional wiring is needed for switching between series or parallel configurations.
Besides convenience, CompR delivers the deepest musical bass and is made to work perfectly with any mono amplifiers. The motor structure itself is a mechanical marvel, utilizing a large-diameter, progressive-roll spider for increased linearity and better sound with high-strength Spiralead™ tinsel leads woven through for maximum transfer of signal. A KICKER standard, the one-piece UniPlate,™ features the vented pole piece and bumped back plate that's tapered toward the edge to improve the magnetic force within the gap, optimizing that magnetic energy. The "bump" provides added voice-coil clearance, assuring precise performance. High-temp coil wire winding around the pole piece and innovative Quad Venting™ slots contribute to the woofers' efficient cooling attributes and durability.
More Magnet:
With a double stacked magnet, the CompR provides powerful bass and a thunderous low-end response for the thump you crave when the volume knob needs a workout.
More Features:
Kicker signature red double stitching makes an outstanding bond between the improved Santoprene®™ surround and a new all-polypropylene woofer cone. You get a deeper bass that stays pumping, no matter what the volume.
Two Coils, One Solution:
Every CompR has two sets of brass voice coil terminals, spring-loaded and covered in a lustrous satin nickel finish. A simple push of the terminal gives you the wiring options you need to get the most out of your system.
15" CompR 2 Ohm:
- The CompR 15-Inch Subwoofer is a 2Ω dual voice coil design, making it easy to get the most out of your amp.
- An absolute workhorse of a sub, the advanced suspension system includes a ribbed polypropylene surround and a large-diameter spider for linear movement, and a distortion-free sound.
- The CompR 15-Inch Subwoofer works best with a sealed or ported enclosure and 800 watts of recommended power.
Features/Specifications:
- Kicker 43CWR152 15" 1600 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer
- Power Handling:
- Peak : 1600 watts
- RMS : 800 watts
- Size : 15"
- Best subwoofer in its class
- Workhorse woofer with advanced components and superior technology
- Large-diameter, progressive-roll spider with high-strength Spiralead™ tinsel leads
- One-piece UniPlate™ with vented pole piece and bumped back plate
- Added voice-coil clearance for full excursion; high-temp coil wire
- Quad Venting™ included vertical and horizontal slots under the cone for ultimate cooling
- Injection-molded polypropylene cone and tough Santoprene® surround
- Full-coverage steel basket with minimized mounting depth
- Stamped Steel Basket
- Brass Spring-loaded Push Terminals
- Dual 2-Ohm high-temperature voice coils
- Double Stacked Magnet
- Sensitivity : 89.4dB @ 1w/1m
- Mounting Depth : 7-15/16"
- Mounting Diameter : 13-3/4"
- Min Sealed Box Vol : 1.8 cu. ft.
- Max Sealed Box Vol : 3.0 cu. ft.
- Min Vented Box Vol : 3.0 cu. ft.
- Max Vented Box Vol : 5.0 cu.ft.
Video of RM36:
Unboxing Video of RM36:
Includes:
- 36 Square Foot Roll of Rockmat Sound Dampening Material
- Roller for a perfect installation
The Rockville Rockmat RM36 sound dampening material is a must have for any professional car audio install. This package includes 9 sheets that are each 4 square feet. This gives you a total of 36 square feet. We also include everything needed for a quick and easy installation! Our Rockmat will increase how loud your car stereo plays! It also improves bass quality and eliminates those bad rattling and distortion sounds.
Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.
Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as GTMAT for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of butyl rubber and aluminum which is the same as many of the more expensive brands out there that sell for twice our price.. We do not cheat our customers. We only make top quality gear over here at Rockville!
Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.
We make all our models in 2 color options. You get the choice of black and silver. We decided to also keep the look very clean! We see all these other brands tattooing their logos all over the material. I always thought it looked stupid. So I made sure to keep our Rockmat with a clean look to it.
Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!
To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!
Features:
- Rockville Rockmat RM36-B 36 Sq Ft Butyl Rubber Sound Dampening/Deadening Car Kit in black
- 100% butyl rubber material with an aluminum heat resistant coating! (no asphault in our sound dampening material!!!)
- Contains a big roll of 36 feet so you can cut as needed!
- Paintable Surface
- Multi purpose is ideal for multiple applications including rear decks, doors, floors, any part of the trunk, roofs, quarter panels, hoods, etc.
- Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by
- Eliminates sound leakage!
- Improves Bass Quality and Reduces Bass Distortion
- Kill unwanted noise, rattles, vibrations
- Reduce exhaust and engine noise
- Aluminum-coated for heat-resistance
- 72mil thickness
- Full car installation reduces unwanted noises 5-8 dB
- We use the highest quality high-tack self-adhesive to make your installation quick and easy!
- Our model has new and improved increased flexibility for an easier installation and top sound quality!
- Permanent installation with ability to withstand even the highest temperatures!
- Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
- Sticks to any surface
- Designed and engineered by Rockville USA!
- Manufactured with the newest state-of-the-art machinery using only the purest raw materials as well!
- Every product is checked during production for consistency. We have very high quality standards!
- We use very high quality butyl rubber which gives amazing sound insulation and shock absorption. We do not use any asphalt in our product!
- Available in both black and silver
Specifications:
- Roll Dimensions 18" x 288"
- Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum
- Reduces unwanted noises 5-8 dB
- Adhesive temperature range of -100F to 300F (-60C to 150C).
- High-Tack Self-adhesive
- Material Color: Black
- Weight: 25 (Lbs.) per box
- Shipping weight: 26.19 LBS
- Shipping Dimensions: 22.64" x 14.57" x 3.54"
- Trunk Lid+4-Door Noise/Sound Dampening Deadening Car Audio Matt Kit
Features of roller:
- Made of high quality Wood & Steel
- Designed especially for use in installing sound dampening material
- Length: 7 in
- Handle Length: 5 in
- Roller Diameter: 1.3 in
- Material Color: Black
- Weight: 0.44 Lbs.
- UPC:
- 613816002160
