Package Includes:

• (1) Kicker 10" Slim Shallow Car Subwoofer
• (1) Rockville 10" Shallow Mount Car/Truck 0.9 Cu. Ft. Sub Encloure Box
• (1) Rockville RXA-T2 2400 Watt Peak/1250w RMS 2 Channel Car Stereo Amplifier
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

---

Authorized Kicker Dealer!

Description for Kicker Sub:

Slimline:
A specially made motor and reinforced cone make the CompVT a perfect choice for big bass without a big box.

Recess Time:
The included Clearance Plate allows the CompVT to sit in a recess made in the back of the enclosure. Now you can make a thin box even thinner!

Beat the Heat:
With full perimeter venting and UniPlate™ black plate and pole piece, you have outstanding thermal management in an ultra-thin sub.

10" CompVT 4 Ohm

• The CompVT 10-Inch Subwoofer is a 4Ω slimline driver. 
• The woofer’s stiff, injection-molded, modified-spoke cone is shaped to provide maximum excursion from a slender basket, allowing better strength and durability.
• The CompVT 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power.

Features/Specifications:

• Kicker 43CVT104 10" 800 Watt Single Voice Coil 4-Ohm Car Stereo Subwoofer
• Power Handling :
• Peak : 800 watts
• RMS : 400 watts
• Size : 10"
• Shallow-mount subwoofer with true high-performance
• This sub is slim enough to be mounted in virtually any vehicle
• Delivers extreme bass with minimum depth
• Four-layer voice coil for max power handling
• Dark gray modified-spoke cone with bracing for clear bass response
• Ventless solid-pole design for direct mount to enclosure rear wall
• Steel “clearance” adapter plate replaces part of enclosure wall depth to further lessen depth
• Injection molded SoloKon cone
• Ribbed Santoprene surround
• High-temp coil wire
• Slender, strong steel basket with coil-cooling perimeter venting
• Durable Spiralead tinsel leads
• Stitched surround for enhanced cone-to-surround strength
• Tough double-stitched surround
• Special spring-loaded binding posts for minimizing depth
• UniPlate™ system redirects heat away from motor structure
• Stamped Steel Basket
• Single 4-Ohm high-temperature voice coils
• Top-mount depth : 4-1/4"
• Cutout diameter : 9-3/16"
• Frequency Response : 25 - 500Hz
• Sensitivity : 87.2 dB
• Minimum Sealed Enclosure : 0.8 cu. ft.
• Maximum Sealed Enclosure : 3 cu. ft.
• Minimum Ported Enclosure : 1.25 cu. ft.
• Maximum Ported Enclosure : 1.75 cu. ft.
• Subwoofer Design : Round / Circle

---

 

Description of RSST10:

The RSST10 sealed 10" shallow mount speaker box is made in the USA with Grade “A” 5/8" MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The 5/8" USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RSST10 Single 10" Sealed Shallow Mount/Truck Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 5/8" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Single10"
• Dimensions in Inches: 15" L x 20" W x 7.5 Bottom Depth" x 5" Top Depth
• Mounting Depth: up to 5.5" (enough depth for any shallow sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.10 Cubic Feet
• Cutout Diameter: 9.125"
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood and port): 0.9 Cubic Feet

---

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

---

Video of RXA-T2:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high-quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXA-T2 is a 2 channel amplifier with 2,400 Watts peak output and 800 Watts RMS (2x 400 @ 4 Ohms). You can also bridge the amplifier and get 1 x 1,200 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc. 

This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, mute and delay soft start technology, and a crossover band-pass control. The RXA-T2 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.

We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXA-T2 2400 Watt Peak/1200 Watt RMS 2 Channel Car Stereo Amplifier
  
• CEA Compliant Power Ratings:
  .....200 Watts RMS x 2 @ 4 Ohms and 1% THD+N
  .....300 Watts x 2 @ 2 Ohms < 1% THD
  .....1 x 600 Watts bridged @ 4 Ohms < 1% THD
  
• RMS Power Ratings:
  .....1200 Watts (2 x 600 Watts RMS) @ 2 Ohms
  .....1 x 1200 Watts @ 4 Ohm Bridged Mono
  .....800 Watts (2 x 400 Watts RMS @ 4 Ohms) < 1% THD
  
• Peak Power:
  .....2400 Watts (2 x 1200 @ 2 Ohms or 1 x 2400 @ 4 Ohms)
  
• High-Speed MOSFET Power Supply
  
• Studio-Grade Bipolar Output Stage Transistors
  
• Fully Adjustable 12dB / Octave Crossover
  
• Low Pass 50Hz - 250Hz
  
• High Pass 15Hz - 250Hz
  
• Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
  
• 2 Ohm Stable Stereo
  
• 4 Ohm Mono Bridgeable
  
• Mute and Delay Soft Start System
  
• High Level Input with Auto Start Smart Turn-On
  
• Full IC-Controlled Protection Circuitry
  
• RCA Preamp Line Output
  
• ELNA Brand Audiophile Capacitors
  
• Status Mode LED Indicator
  
• 8 Volt Preamp Circuitry
  
• Minimum THD at Rated Power: < 0.05%
  
• Frequency Response: 10Hz - 40KHz
  
• S / N Ratio: 100dB
  
• Damping Factor: > 200 @ 100Hz
  
• Dual 40 Amp Maxi Fuses
  
• Dimensions: ( W x H x L ) 8.5" x 1.8" x 13"

Owner's Manual​​

---

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets