- (1) Kicker 43CVR152 COMPVR 15" 1000 Watt DVC 2-Ohm Car Audio Subwoofer Sub CVR15-2
- (1) Kicker KEY5001 500w Mono Amplifier w/Bass Revealer Processor Smart Amp 47KEY5001
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Authorized Kicker Dealer!
Video of 43CVR152:
Description:
Best in Class:
To get the most out of your amp, CompVR comes in two or four-ohm dual voice coils. Kicker red surround stitching binds the suspension perfectly to the cone, while SoloKon™ marries the woofer and back brace into one, cohesive system.
It's Cool:
KICKER uses an advanced heat management system. Perimeter venting allows air to circulate while our UniPlate™ system redirects even more heat away from the motor. You get a cool, reliable speaker that lasts and lasts.
Raw Power:
A stamped steel basket holds vibration at bay while a pair of high-temp voice coils move an injection molded woofer hundreds of times a second, giving you strong, distortion-free bass.
15" CompVR 2 Ohm:
The CompVR 15-Inch Subwoofer is a 2Ω dual voice coil design, built for easy wiring.
The CompVR offers some of the clearest, loudest bass from KICKER’s round subwoofer lineup. With our exclusive SoloKon™ technology, flex and distortion are a thing of the past.
The CompVR 15-Inch Subwoofer works best with a sealed or ported enclosure and 500 watts of recommended power.
Features/Specifications:
- Kicker 43CVR152 15" 1000 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer
- Power Handling:
- Peak : 1000 watts
- RMS : 500 watts
- Size : 15"
- Injection molded SoloKon cone
- Ribbed Santoprene Surround
- Perimeter Venting
- Spiralead™ tinsel-lead technology
- UniPlate™ system redirects heat away from motor structure
- Stamped Steel Basket
- Spring-loaded Push Terminals
- Dual 2-Ohm high-temperature voice coils
- Top-mount depth : 8-3/16"
- Mounting Diameter : 13-11/16"
- Sensitivity : 89.2dB @ 1w/1m
- Frequency Response : 25-500Hz
- Minimum Sealed Enclosure : 1.8 cu. ft.
- Maximum Sealed Enclosure : 5.2 cu. ft.
- Minimum Ported Enclosure : 3 cu. ft.
- Maximum Ported Enclosure : 5 cu. ft
- Subwoofer Design : Round / Circle
- Main Cone Color : Dark Gray
- Woofer Composition : SoloKön
- Woofer Surround : Santoprene Rubber
- Weather resistant - Suitable for marine use in additional to car applications
- We can ship Kicker products to the 48 continental United States
Advantages of purchasing from an authorized seller:
- Best prices - We sell all Kicker products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Kicker product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Kicker products from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Description of 47KEY5001:
The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing).
AUTO EQ
Using KICKER’s supplied test tones (below), the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!
Start with these FREE TEST TONES for easy setup!
ALL THE CONTROL
Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.
HIDDEN TREASURE
Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.
START. DON’T STOP.
The amplifier also features FIT 2+™ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.
SUGGESTED ENCLOSURES
While we suggest this list for the ultimate bass experience, KEY500.1 will actually work with all KICKER subwoofers up to 12 inches; see your sales associate for the ideal subwoofer in your particular system, because every system is unique.
Specifications:
- Power (watts/ch), 1 Ohm mono: 500
- Power (watts/ch), 2 Ohm mono: 300
- Power (watts/ch), 4 Ohm mono: 150
- Standard dimensions in.(H x W x L): 1-11/16 x 4-1/8 x 8-1/8
- Metric dimensions cm(H x W x L): 4.3 x 9.2 x 20.7
- Frequency Response (Hz): 10-160
- Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
- Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
- Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- UPC:
- 613817164171
