Package Includes:

• (1) Kicker 10" Car Audio Subwoofer
  
• (1) Rockville 10" Single Vented Car Sub Enclosure Box / 1.9 CU FT
• (1) Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Amplifier
  
• (1) Rockville RWK81 Complete 8 Gauge Wire Kit With Rca Cables
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

---

Authorized Kicker Dealer!

Description for Kicker Sub: 

The 2016 Comp 10-Inch Subwoofer comes with a single 4-Ohm terminal. The powerful KICKER Comp sub delivers both convenience and raw power - all in the one package. The 2016 Comp Subwoofers give you deep bass and a great value. The Comp 10-Inch works best with 150 watts of recommended power.

Features:

• KICKER 43C104 Comp 10" 300 Watt SVC 4-ohm Car Audio Subwoofer
• Size: 10 inches (25.0 cm)
  
• Impedance: 4 ohms SVC
  
• Max Rec Amplifier Power:*
  ....300 Watts Peak
  ....150 Watts RMS
• Recommended power range: 50 - 150 watts RMS
• Injection molded SoloKon cone
• Optimized Polyfoam Ribbed Surround
• Extremely rigid cone, along with 360 degree back bracing eliminates distortion
• Double stitched surround for enhanced durability
• Tinsel leads woven into the spider with Kicker's Spiralead technology
• Single high-temperature voice coil
• 45oz. Magnet structure
  
• Sensitivity: 86.2 dB 1w/1m
• Frequency Response: 30-500 Hz
  
• Mounting Depth: 5-1/16 inches (12.8 cm)
  
• Mounting Cutout: 9-1/8 inches (23.1 cm)
• Min Sealed Box Vol: 1.0 cu. ft (28.3 L)
• Max Sealed Box Vol: 2.4 cu. ft (68 L)
• Min Vented Box Vol: 1.25 cu. ft  (35.4 L)
  
• Max Vented Box Vol: 1.75 cu. ft (49.6 L)
  

*Assumes typical music program with minimal amplifier clipping; varies with enclosure size.

---

Video of RXA-T1:

Description:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
 
The RXA-T1 is a 2 channel high power amplifier with 1,500 Watts peak output, 750 Watts RMS output (2 x 375 @ 2 Ohms) and 500 Watts RMS (2 x 250 @ 4 Ohms). You can also bridge the amplifier and get  1 x 750 Watts RMS @ 4 Ohms. The CEA-2006 compliant rating is 125 x 2 @ 4 Ohms and 185 x 2 @ 2 ohms <1% THD. Most brands do not use CEA compliant ratings because quite simply they do not want you to be able to compare their amps to others on the market. Over here at Rockville, we want you to be able to compare our amps to any brand on the market. For this reason we are supplying you with multiple ratings. The CEA compliant rating should be used when matching up or comparing this amplifier to other CEA compliant brands such as Kicker, Rockford Fosgate, Alpine, etc. We also supply an RMS rating which should be used when comparing with great brands that are not CEA compliant such as Hifonics, Earthquake, Powerbass, etc. The peak rating is simply what the amplifier can hit for a split second at the highest point of a song. This rating from any brand is not really important. RMS and CEA ratings truly are the most important.
 
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 channel / bridgeable mono model, mute and delay soft start technology, and a crossover band-pass control. The RXA-T1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.
 
The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.
 
We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please). 

Features:

• Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier
  
• CEA Compliant Power Ratings:
  • 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N
  • 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD
  • 1 x 370 Watts bridged @ 4 Ohms < 1% THD
• RMS Power Ratings
  • 750 Watts (2 x 375 Watts RMS) @ 2 ohms
  • 1 x 750 Watts @ 4 ohm Bridged Mono
  • 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD
• Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms)
  
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover
• Low Pass Filter: 50Hz - 250Hz
• High Pass Filter: 15Hz - 250Hz
• Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• RCA Preamp Line Output
• ELNA Brand Audiophile Capacitors
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• High Level Input with Smart Auto Turn-On
• Minimum THD at Rated Power: < 0.05%
  
• Frequency Response: 10Hz - 40KHz
• Damping Factor: > 200 @ 100Hz
• 50 Amp Maxi Fuse
• Dimensions: (W x H x L) 8.5? x 1.8? x 13?

Owner’s Manual

?

 

---

Video of RWK81:

Description:

The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 8 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (1) sets of RCA cables.

Features:

• Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• (1)  17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17 8 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3 8 Gauge SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

---

Description for Rockville Enclosure:

The RSVB1020 is a single 10" ported/vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RSVB1020 Single 10" 1.9 cu. ft. MDF Vented Subwoofer Enclosure Box
• Extra Large Mounting Depth For Larger Subwoofers
• Single 10" Enclosure
• Machine precision cut mounting holes
• ¾” USA Heavy Duty MDF Construction
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
• Designed to give the best sound quality

Enclosure Measurements:

• Type of Enclosure: Vented/Ported
• Enclosure Sub Size: Single 10"
• Dimensions in Inches: 16" L x 20" W x 14" H
• Top and Bottom Depth: NA"
• Mounting Depth: up to NA" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.6 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.9 Cubic Feet

---

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.