Package Includes:

• (1) Kicker 42PXIBT1002 200 Watt 2-Channel Bluetooth Amplifier+Controller RZR/ATV/UTV
• (1) Rockville UT525B UTV/ATV 5.25" Rollbar Wakeboard Marine Speakers/Swivel/IPX6

---

Authorized Kicker Dealer!

How to install an amplifier in your UTV:

Description:

You don’t need a radio to enjoy great tunes! Whether it’s on the trail, on the road or on the farm, easily connect your Bluetooth device for awesome sound in any ride! The PXiBT100.2 Stereo Amplified Controller With Bluetooth is the only solution you need for sound in your ride. No radio necessary.

Whether it’s a motorcycle, side-by-sides, ATV or even a classic car, this weatherproof amp delivers the power you need, on or off the road. A 24dB selectable crossover with 24dB subsonic filter, made to craft your sound to exacting standards. The Bluetooth receiver allows you to stream music right to the amplifier, while the illuminated display allows you to change track, volume and source. A wide range of input levels make this amp easy to hook up with a factory radio or aftermarket. This PXA amplifier delivers as much as 100 total watts into two channels.

Features:

• KICKER 42PXIBT1002 100 Watt Bluetooth Amplifier+Controller RZR/ATV/UTV PXIBT100.2
• RMS Output @ 4-Ohms: 25 watts x 2
• RMS Output @ 2-Ohms: 50 watts x 2
• Length: 7" (17.8 cm)
• Height: 1-5/8" (4 cm)
• Width: 3-7/16" (8.7 cm)
• USB audio input / charging: 5V/1A
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise Ratio: 90 dB
• Aux Input Sensitivity: 500mV
• Selectable 12dB high-pass crossover: OFF, 60Hz, 80Hz, 120Hz
• RCA pre-out voltage: 4.5V RMS
• Fuse Rating: 15 A x 1
• Pulse Width Modulated MOSFET power supply
• Wired remote control included
• LED power (green) and protect (red) indicators
• Stream music to your amplifier via Bluetooth
• Soft start turn-on
• 2 or Mono channel operation
• Weather proof for motorcycle, ATV and classic car applications
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation

---

UT525B PRODUCT VIDEO:

How To Set Up Your UT525B:

How To Set Up the Brackets On Your UT525B:

What's In The Box:

• (2) Swivel mount roll bar / wakeboard speakers
• Swivel Mounting brackets and mounting hardware to fit 1.5'' or 1.75" or 1.875" or 2" bars
• Installation hardware
• Owner's manual
• Warranty card

Features:

• Rockville UT525B 5.25" Marine UTV/ATV Roll Bar / Wakeboard Tower Speakers
• Peak Power Handling: 280 Watts
• RMS Power Handling: 70 Watts
• True Coax Design With the Tweeter Completely Separated From the Cone
• Larger Cone Surface Area Gives Better Mids and Lows
• Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
• True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
• Heavy Duty ABS enclosure
• IPX6 Water Resistance Rated
• Marine-grade components are protected from the outdoor elements
• Adjustable Aluminum Mounting Bracket is Strong and Sturdy
• Bracket Swivels 360 Degrees (Fixed swivel)
• 5.25" Woofers with 11 oz Magnets and Oversized 1" Kapton Voice Coils
• 1" PEI Dome Tweeters with Neo magnets
• Fits wakeboard towers and roll bars ranging from 1.5" to 2" inches
• Shallow enclosure design is perfect for UTV, ATV, and marine applications
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Resistant to Water, Rust, and UV Rays
• Polypropylene Mica Injected Cone with Butyl Rubber Surround
• Frequency Response: 130Hz - 20KHz
• SPL: 87dB @ 1w/1m
• Impedance: 4 Ohms
• Shockproof Design
• ABS Weather Resistant Grills and Hardware
• RoHS Certified
• Color: Black
• Dimensions (H x W x D): 9" x 6.39" x 6.23"