• (1) MTX 3512-02 12" 500 Watt Peak/250 Watt RMS SVC 2-ohm Car Audio Subwoofer Sub
• (1) Alpine KTA-30MW 600 Watt Mono Amplifier Class-D Amp For Polaris RZR/ATV/UTV/Cart

Authorized MTX Audio Dealer!

Description of 3512-02:

Hard and Loud
Implementing many of the same features found on our 75 & 95 Series SuperWoofers, the 35 Series can rock hard and loud for extended periods of time, while maintaining accurate and clean bass throughout the party. You will be impressed.

The 3512-02
The 3512-02 is a 12" single voice coil, 2 ohm, 250 watt Car Audio Subwoofer designed to deliver outstanding SPL and sound quality in an affordable combination of state-of-the-art MTX sub features...and it rocks.

More Than You Expect
Economically priced subwoofers that deliver very impressive bass. Install one in a ported, or sealed, enclosure with a mono amplifier, be ready for "Kicka**" Sound that you wouldnt expect from a subwoofer.

The MTX Inverted Apex Surround
This subwoofer features a new Inverted Apex surround that increases surface area allowing for more air movement and higher SPL, and a progressive suspension that lowers distortion resulting in improvLow profiled sound quality. This subwoofer also incorporates Spider Plateau Venting which is a mechanical cooling process that targets cool air at the voice coil effectively managing the temperature for long term performance.

Features:

• MTX 3512-02 12" 500 Watt Peak/250 Watt RMS 2-Ohm Car Subwoofer
• RMS Power Handling: 250 Watts
• Peak Power Handling: 500 Watts
• Recommended Amp Power: 125-250 Watts RMS
• Impedance: 2 Ohms
• Frequency Response: 26Hz - 130Hz
• Sensitivity: 86 dB
• Voice Coil: 1.75" inches (Single)
• Magnet Weight: 56 oz.
• Mounting Depth: 5.313" inches
• Cut Out Diameter: 11.125"
• Volume Displacement: 28.53 cu in
• Sealed Enclosure Net Volume: 1.0 cu ft.
• Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
• Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
• Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality

Description of KTA-30MW:

PRODUCT OVERVIEW
With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys.

A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys.

This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycles saddlebags.

A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.

DYNAMIC PEAK POWER
The KTA-30MW features Alpine’s exclusive Dynamic Peak Power (D.P.P.) technology which intelligently adjusts the gain to automatically adapt to musical needs. D.P.P. prevents the amplifier from clipping music signals by supplying up to double the power to support power hungry, rhythmic peaks like a snare drums, trumpets, or high-hat cymbals.

During these dynamic musical passages, D.P.P. instantly delivers bursts of power to rise to the peak demands of the music and very quickly rolls back down to maintain its efficiency.

WEATHER RESISTANT FORMAT
The KTA-30MW is ready for your adventures. It is weather resistant, rated at IP66 for protection again dust ingress and high-pressure water spray. Its rugged chassis and high-quality waterproof connector can be used in installations where it will be exposed to the outdoor elements.

HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.

Specifications:

• ALPINE KTA-30MW 600 Watt Mono Amplifier Class-D Amp For Polaris RZR/ATV/UTV/Cart
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• CTA-2006-B Specifications: 300W RMS x 1 (2O/4O, 14.4V, = 1% THD+N)
• 600W x 1 Peak (2O/4O, 14.4V, = 1% THD+N)
• 83dB S/N (ref. 1W into 4O)
• =0.1% THD+N
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
• Sound control
• Crossovers: Variable Low Pass filter 50-400Hz @ -24dB/Oct.
• Input gain settings (variable)
• 2ch/4ch input (selectable)