- (3) Pairs of Rockville RMSTS65W 6.5" 800 Watt Waterproof Marine Boat Speakers 2-Way White
- (1)Rockville MS10LW 10" 2400 Watt White Marine/Boat 10" Free Air Subwoofer with LED
- (1) Rockville RXM8BTW 8 Channel 1500 Watt Marine Bluetooth Amplifier
- (1) Rockville RXM-M10 1200 Watt/600w RMS Marine/Boat Mono 1 Ohm Amplifier Amp
- (1) Pair of Rockford Fosgate Prime RM0652 6.5" 100W Marine/Boat Speakers White 4-Ohm
- (2) Rockville RMWK8 8 AWG Waterproof Marine/Boat Amplifier/Amp Installation Wire Kit
- (3) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin
- (1) Pair Rockville MAC65W 6.5" White Aluminum Wakeboard Tower Speaker Pod Enclosures
- (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote
Video of RMSTS65W:
The RMST series of marine speakers by Rockville is our step up series that offers a 1" titanium tweeter as well as more power handling! They have a larger magnet and can handle 100 watts RMS & 400 watts peak! If you are using an external amplifier we recommend this series.
These speakers are completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage. Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!
Rockville engineers care about quality and sound more than anything else. The RMST65 was designed in a molded ABS plastic basket. The polypropylene cone is reliable and sounds great. This material is used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition rubber is a very waterproof material. The 1" titanium tweeter puts out incredible sounding highs. The low end bass and mids of these speakers really makes them stand out.
The RMST65 6.5" marine speakers were engineered to deliver amazing power and sound quality in the outdoors; be it saltwater, freshwater or any other harsh environments. These speakers can withstand tons of abuse and can handle 400 watts peak and 100 watts RMS each. These Rockville speakers comply with the CEA 2031 Loud Speaker Standard. This same rating standard is used by the highest end marine brands in the industry. CEA compliant means you can rest assured that the ratings are 100% legitimate. (We compared these against other brands and although some of these other brands stated higher wattage, the Rockville RMST65 speakers were able to handle more than double the power!)
Using only true marine grade components and materials, the Rockville RMST65 speakers are fully marinized against salt & fresh water conditions. They will not get damaged by fresh water, salt water, or moisture. There is also an additional waterproof and UV resistant coating to completely protect the speakers.
These speakers come with everything you need for installation including pre mounted grills and mounting hardware.
Features:
- Rockville RMST65W 6.5” 2-Way 800 Watt Marine Boat Speakers in White (Pair)
- CEA Compliant Power Ratings
- Power Rating: 400 Watts Peak /100 Watts RMS Per Speaker
- System Power: 800 Watts Combined
- 6.5“ 2-Way Speaker System
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Waterproof and rustproof
- Stainless Steel Terminals
- Molded ABS plastic basket
- Polypropylene Mica Injected Cone
- Rubber Surround
- High quality ferrite magnet
- 1” inch Titanium Tweeter
- Oversized 1” CCAW Kapton Voice Coil
- Large Magnet and Motor Structure
- Pre-installed mounting screws included
- Perfect for both marine, outdoor, and car use
- Impedance: 4 Ohms
- Frequency Response: 55Hz - 20KHz
- Sound Pressure Level: 91dB @ 1w/1m
- Total Diameter: 7.56”
- Cutout Diameter: 5.43”
- Total Height: 3.86”
- Mounting Depth: 2.56”
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
Video of MS10LW:
Unboxing Video of MS10LW:
Description:
The MS10LW is one of the most powerful marine subwoofers on the market. What really makes this sub stand out is the sound quality and durability. It goes so loud that if you crank it up, boats that are thousands of feet away can feel the bass. The frequency range of these subs are so good that it will make all your songs sound so much better! These play frequencies that normal full range speakers cannot hit, adding depth and richness to all your music.
The MS10LW is 2,400 watts peak, 1,200 watts Program RMS and 600 watts CEA Rated! This sub is CEA-2031 compliant, which makes it easy to compare this subwoofer to other CEA compliant subs on the market. The issue in the marine audio world is that there are so many different brands with different standards on how they rate their products. We want to make it easy for you to compare our products to any brands on the market, therefore we provided all 3 ratings for you to do so. The CEA compliant rating, which you should use to compare this to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supply a program RMS rating that has become standard for many good brands in the industry such as Hifonics, Earthquake, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the sub can handle for a short burst.
This subwoofer has a double-stacked 80 Oz magnet! They are twice as large as almost any other marine sub on the market, which is why these can handle so much power. In addition, the MS10LW has a fantastic sensitivity rating at 90dB, which means even if you have a smaller amplifier, the subwoofer is sensitive enough that it will still sound great.
The MS10LW was designed in a molded ABS plastic basket that is made with a special blend that is waterproof and un-breakable. You can literally jump on it and hit it with a sledgehammer without it breaking!
Using only true marine grade components and materials, the Rockville MS10LW subwoofers are fully marinized against salt & fresh water conditions. These subs are completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage. These subwoofers also come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!
Features:
- Rockville MS10LW 10" Marine Free Air Subwoofer with LED (White)
- Free air subwoofer does not require any enclosure
- Max Power: 2400 Watts
- RMS Program Power: 1200 Watts
- RMS Power: 600 Watts
- Polypropylene cone with Rubber edge
- 2.0" 4 Layer dual voice coil
- Molded ABS plastic basket made with a special blend that is waterproof and un-breakable (if you literally jump on it, it will not break or bend)
- Magnet 80 Oz double stacked magnet
- Frequency response: 30Hz-4Khz
- Impedance: Dual 4 ohms
- Sensitivity: 90dB
- Total diameter:10.6"
- Cutout diameter:9.13”
- Total height:7.2"
- Mounting depth:5.6"
Specifications:
- Free Air Resonance (Fs): 31.05 Hz
- Electrical “Q” (Qes): 0.5577
- Mechanical “Q” (Qms): 2.3313
- Total Speaker “Q” (Qts): 0.45
- Equivalent Compliance (Vas): 1.676 cu ft / 47.4728 L
- One-Way Linear Excursion (Xmax): 0.41 in / 10.5 mm
- Reference Efficiency (No): 0.25%
- Efficiency (1 W / 1 m): 86.7 dB SPL
- Effective Piston Area (Sd): 51.15 sq in / 0.033 sq m
- DC Resistance (Re): 3.4 Ω
- Nominal Diameter: 10.0 in / 250 mm
- Overall Diameter: 10.55 in / 268 mm
- Mounting Hole Diameter: 9.0 in / 229 mm
- Bolt Hole Circle Diameter: 9.57 in / 243 mm
- Mounting Depth: 5.6 in / 142 mm
- Net Weight: 10.36 lb / 4.7 kg
Video of RXM8BTW:
Description:
Rockville RXM8BT Marine 8 Channel Digital Class D Power Amplifier with Bluetooth Wireless Integration.
The Rockville Proton
Series Marine
amplifiers are engineered with advanced technologies. These amps are a
full solution to your marine audio needs. Gone are the old days where
people bring CD's on their boat or listen to FM radio that cuts in and
out. Gone are the days where you need a receiver and multiple amplifiers
to power your speakers. Gone are the days where you have wires running
throughout your boat. Welcome to the marine system of the future! The
Rockville RXM8BT will change your life! This is an 8 channel amplifier
with Bluetooth built in! The Bluetooth will allow you to stream music
wirelessly from a Bluetooth enabled MP3 player or smartphone. Of course
the RXM8BT features "zero noise" RCA differential preamp inputs and
preamp outputs for system expansion. This means you can connect any
audio device through the RCA input. But it's the high quality Bluetooth
that will blow you away. It offers advanced streaming from almost any
music device. Now you can easily play your iTunes, Pandora, Rhapsody and
Spotify directly from your smart phone directly to all 8 channels of
your amplifier. Even more importantly though, is the capability of the 8
channel amplifier. We feel this is the best marine amplifier on the
market even if it did not have the Bluetooth capability which it has. It
offers more system flexibility and more power than anything even
remotely close to this price. I almost forgot to mention how good the
sound quality is.
The Rockville Proton Series Marine amplifiers utilize Texas Instruments patented switching technology to deliver class-leading sonic performance and extremely high power from what seems like an impossibly miniature package. The Proton Series' dimensions are made possible by its outstanding efficient class D design which is over 90%efficient. The result is more power in your boat with less current drain. Proton Series amplifiers are 2 ohm stable in stereo and 4 ohm in mono.There are so many options of configurations. Any 2 channels can be bridged to 1 channel. So for example, you can bridge 4 channels to 2 channels and still have an additional 4 channels remaining. You can simply plug 1 speaker to each channel. You can use 2 or 4 of the channels for subwoofers and the rest for your full range speakers. The configuration options are amazing with this amplifier. Whether you have 4 speakers, or 16 speakers, and whether you do or do not have subwoofers, this amplifier will power your system. With a smart auto thermal reset circuit, Proton Series amplifiers are almost impossible to shut down. When they get too warm, the thermal circuit reduces power by up to a third until they cool down enough to power up again at full power. And mixed impedances on different channels are no problem with the advanced rail voltage circuitry design.
This amplifier is so awesome I almost forgot to write about the most important thing. How much power the thing has. The short answer is a boatload!
But in all seriousness,
this
amplifier is extremely powerful. The true RMS ratings are 65 watts x 8
at
4 ohms or 95 watts x 8 at 2 ohms. This is the CEA compliant ratings. CEA
compliant means the ratings are rated with the exact same rating
standards as the top brands in the industry such as Kenwood, Alpine,
etc. In total this has 750 watts RMS and 1,500 watts peak output. There
are not many marine amplifiers on the market with this much power. Other
brands out there will rate their amps at thousands of watts but in
reality are only a hundred or 200 watts. But this Rockville
amplifier is legitimate and will produce or exceed its rated power. To
prove the power; you can check the fuse rating. This amplifier is
equipped with an 80A fuse. To proe the power; you can look at the fuse
rating. A
general rule for 12 volt amplifiers is if you multiply the fuse rating
by 10 that is close to the real power you will get. In this case that is
800 watts RMS (we rate it at 750w RMS since this is CEA compliant).
Features:
- Rockville RXM8BTW 8 Channel 1500 Watt Marine Amplifier W/Bluetooth White
- Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!)
- 1500 Watts Peak System Power
- 750 Watts RMS System Power
- RMS Power Output at 4 Ohms: 65 Watts x 8 Channels CEA Rated
- RMS Power Output at 2 Ohms: 95 Watts x 8 Channels
- RMS Bridged Power Output at 4 Ohms: 190 Watts x 4 Channels
- Peak Bridged Power Output at 4 Ohms: 380 Watts x 4 Channels.
- Configurable to 8-6-4 channels or 6.1 or 4.2 System
- Bluetooth Wireless with Auto Pairing
- UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure
- Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture
- LED Power and Protect Indicators
- TI Digital Class D Audio Topology
- High Speed MosFET Power Supply
- Studio Grade Bipolar Output Stage Transistors
- Micro Size Architecture with SMD Component Circuitry
- Compact Design and High Power
- Non-Corrosive High Gloss White Aluminum Casing
- Selectable Bass
- Non-Corrosive Brushed Aluminum Casing
- Conforms to the American Boat and Yacht Council (ABYC) Marine Electronic Standards
- Bass Equalization: Fully Adjustable 0 - 12dB at 45Hz
- 4-Way System Protection Circuitry (DC, Short, Thermal, Overload)
- Heavy-Duty Aluminum Alloy Heat-sink
- Stainless Steel RCA Level Inputs
- Stainless Steel Bolt Down Molded Terminals
- 4CH / 8CH Input Selector Mode
- Independent Crossover Controls between CH1-4 and CH5-8
- Full Range / Low Pass / High Pass Configurable
- Variable High-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
- Variable Low-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
- Frequency Response: 10Hz - 40KHz
- S/N Ratio: >100dB
- Minimum THD: <0.05%
- Damping Factor: >200 at 100Hz
- Input Voltage: 150mV - 6V
- RCA Line Output
- 80A Fuse rating!
- Channel Seperation: >60dB
- Input Impedance: 22K
- Dimensions 6.7" W x 2" H x 11.5" L
Video of RXM-M10:
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high-quality components, you will be amazed at the quality and power that these new Phenom amps offer.
The RXM-M10 is a Class D monoblock high power marine amplifier with 1,200 Watts peak output, 600 Watts RMS output and and 300 watts CEA-2006 rated power. It is CEA-2006 compliant which makes it easy to compare this amplifier to other CEA compliant amps on the market. The issue the car audio world is facing today is that there are so many different brands with different standards on how they rate their products. Over here at Rockville, we want you to be able to compare our amps to any brand on the market. For this reason, we are supplying you with multiple ratings. The CEA compliant rating should be used when matching up or comparing this amplifier to other CEA compliant brands such as Kicker, Rockford Fosgate, Alpine, etc. We also supply an RMS rating which should be used when comparing with great brands that are not CEA compliant such as Hifonics, Earthquake, Powerbass, etc. The peak rating is simply what the amplifier can hit for a split-second at the highest point of a song. This rating from any brand is not really important. RMS and CEA ratings truly are the most important.
The RXM-M10 has a conformal coating on its PCB (printed circuit board) in order to protect against moisture, dust, chemicals, and temperature extremes. This coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior screws are made of stainless steel to better withstand the elements. This amplifier is fully marine-rated from start to finish.
One of the tricks to determine the real power of an amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. RXM-M10 features a 50 Amp Maxi Fuse. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXM-M10 you are getting your money’s worth and then some.
This unit also features a high speed MOSFET power supply and studio-grade bipolar output stage transistors. It has a fully adjustable12dB/Octave cross over with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dash board subwoofer control for added convenience. The RXM-M10 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels. This amplifier can be installed to any marine system.
The RXM mono amplifiers took years of engineering. A lot of new technology went into these amps. We call this technology optical coupler Class-D. This new technology gives the amplifier punchier bass compared with a typical class “D” amp. A major difference in our OC technology is the preamp input stage and output stage are separated in circuitry. It is less susceptible to noise, which typically is picked up from the preamp input. The RCA input accepts both balanced and un-balance inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise.
The Phenom amps by Rockville use only the top parts. We use Siemens correction capacitors which are well-known for producing crystal clear sound quality. We use TL072 OP (power supply) which is composed of MOSFETs. Typical class “D” amps use JRC4558, which is composed of transistors only. MOSFET power supplies have a higher speed, lower loss rate, lower noise, and ultimately supply more efficient and clean power along with lower THD (distortion). We redesigned the layout of the PCB boards to allow the amp to run smooth and cool. Each and every amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rdparty independent company unaffiliated with our factory or with us to go to the factory and do random inspections of the power and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90-day money back guarantee. This means if for any reason you want to return the amplifier back and get a full refund we will send you a label and take the amp back and give you all your money back. (Amp must be complete along with the box).
Features:
- Rockville RXM-M10 1200 Watt Peak/600w RMS Marine Class D Mono Block Amplifier
- CEA Compliant Power Ratings:
- 1 Ohm: 300 Watts x 1 Channel <1% THD+N
- 2 Ohm: 200 Watts x 1 Channel <1% THD+N
- 4 Ohm: 150 Watts x 1 Channel <1% THD+N)
- RMS Power Ratings:
- 1 Ohm: 600 Watts x 1 Channel
- 2 Ohm: 400 Watts x 1 Channel
- 4 Ohm: 300 Watts x 1 Channel
- Peak Power:
- 1 Ohm: 1200 Watts x 1 Channel
- 2 Ohm: 800 Watts x 1 Channel
- 4 Ohm: 600 Watts x 1 Channel
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass 50Hz - 250Hz
- Subsonic Filter 15Hz - 55Hz
- Fully Adjustable 12dB Bass Equalizer
- RCA Preamp Line Output
- Phase Control Switch
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- Remote Dashboard Subwoofer Control
- Now exclusively with “Professional Peak limiter Circuitry” which guarantees distortion free musical playback at all levels
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- Minimum THD @ Rated Power: <0.05%
- Frequency Response: 10Hz - 500KHz
- Sensitivity: 100dB @ 1w / 1m
- Damping Factor: > 220 @ 100Hz
- 50 Amp Maxi Fuse
- Dimensions: ( W x H x L ) 8.5" x 8" x 16.1"
Description of RM0652:
The Rockford Fosgate RM marine grade standard takes into account the devastating effects of the outdoor environment and takes extreme measures to ensure optimum performance.
The Marine RM full-range speakers are perfect for anyone looking to add some FANATIC sound to their vessel, and will always sound great when listening to your music at the dock or while tearing up the waves at full throttle.
The RM0652 Prime 6.5" is a 2-way component system with a coaxially integrated tweeter featuring marine grade weather proofing technologies. Supplied in all white with matching grille.
Features:
- Pair Rockford Fosgate Prime RM0652 6.5" 100W Marine/Boat Speakers White 4-Ohm
- True Marine Grade compliance
- 100% UV stable ASA injection molded plastic parts
- Injection molded mineral filled polypropylene cone body with UV inhibitors
- UV and Salt Fog Resistant Santoprene Surround
- Grill Integrated 0.5" LCP Dome Tweeter
- Ultra-flexible fully insulated silicone lead wire
- Corrosion resistant quick disconnect speaker terminals
- Moisture, tear and fatigue resistant Aramid fiber spider
- Available in black or white
Specifications:
- Configuration: 2-Way Full-Range
- Nominal Impedance (Ohms): 4-Ohm
- Frequency Response (Hz): 52Hz - 20kHz
- Midrange Nominal Diameter (cone/diaphragm): 6.5"
- Midrange Mounting Depth: 2.5 in. (63 mm)
- Tweeter Nominal Diameter (dome/diaphragm): 0.50" (13 mm)
- Power Handling: 50 Watts RMS ; 100 Watts Max
- Crossover: High-Pass (HP): 6dB/Octave
- Sensitivity (dB @ 1W/1M): 88
- Grille/Trim Ring Included: Yes
- Mounting Hardware: Stainless Steel
Videos of RMWK8:
Rockville's RMWK8 exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!
Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.
Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.
Features:
- Rockville RMWK8 8AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
- 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1PC 50A Mini-ANL Fuse
- 2PCS Ring Terminals
- 2PCS Spade Terminals
- 5PCS Speaker Cable Terminals
- 1PC Washer
- 10PCS White Cable Ties
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
Description of MRCA25:
Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Features:
- Rockville MRCA25 RCA Interconnect Cable
- 25’ Ultra-Flexible PVC Shield
- Twisted Pair
- Premium Audiophile Marine RCA Interconnect Cable
- High Performance Water Proof RCA Plugs
- Tinned Copper Strands for Sonic Purity
- Outstanding Noise Rejection, Accuracy, and Frequency Response
Authorized Rockville Dealer!
Video of RGHR2:
Included in the box:
- Marine digital media receiver
- Wired remote with 32.8 foot wire
- USB extension cable (40 inches)
- Mounting bracket
- Screws
- ISO wiring
- Owner manual and warranty
The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.
Crazy loud!
We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.
Included wired remote
Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.
Latest listening features
The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.
Ability to connect multiple external amps
This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplifiy your speakers and a subwoofer amplifier.
Features:
- Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
- Fits into a standard Gauge-Hole (Tachometer) Opening
- Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
- Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
- IP66 Waterproof Certification (Tested to withstand the elements)
- USB Input to play back audio files store on a USB thumb drive or any other USB device
- RCA Aux Input
- AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
- Bluetooth built in to stream audio from any Bluetooth enabled device
- USB Input Charges Your Phone
- Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
- Big easy to use buttons
- Backlit LCD display
- Wired Remote Control Included (normally $50)
- Required cutout: 3.72" (diameter) x 2.75" (depth)
- USB is 500mA and 5V and supports 16GB max
- Dimensions:
- 3.72” inch cutout mounting diameter
- 4.45” inch diameter top plate
- 2.75” mounting depth (not including top plate)
- 3.91 inch depth included the top plate
- Specs of the built in amplifier:
- TDA7851L quadbridge power amplifier
- 4 x 72 watts peak @ 2 ohm
- 4 x 48 watts peak @ 4 ohms
- 4 x 28 watts RMS @ 4 ohms
- Highly efficient even when running at 2 ohms!
- Low distortion even at top volumes
Authorized Rockville Dealer!
Video of MAC65W:
Includes:
- 2 Wakeboard Cans
- All mounting hardware
- (2) 2.375” rubber inserts
- (2) 2.25” rubber inserts
- (2) 2.5” rubber inserts
- (2) 2” rubber inserts
Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC65W comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter. Six precision molded high impact rubber inserts guarantee fitment on towers from 2” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!
These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC65W features a white powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading. They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!
The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.
Features:
- Pair of Rockville MAC65W white aluminum can wakeboard tower enclosures
- Made of high quality 6061 aircraft grade aluminum
- Beautiful white powder-coat finish
- 100% waterproof and fully marinized against salt and fresh water conditions
- Internally wired for clean install—no exposed wires or terminals
- High efficiency design features the perfect airspace for 6.5” speakers
- Rugged universal mounting clamps made of 6061 aluminum
- Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
- Mounting depth (in inches): 7.4"
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.
- UPC:
- 613815825067
