• (1) Mackie 2404VLZ4 24-channel 4-Bus FX Mixer w/ USB
• (20) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper

Authorized Mackie Dealer!

Video of 2404VLZ4:

Description:

ONYX PREAMPS

The performance of Mackie’s Onyx mic preamps is more than proven. Just check all the amazing reviews and customer testimonials. Their boutique quality sound and unmatched performance rival any high-priced, boutique preamp on the market. Adding these flagship preamps to our VLZ4 Series compact mixers underlines our commitment to continually improving the performance of the VLZ line with each generation.

HIGH HEADROOM / LOW NOISE

The VLZ4 design goal was simple: every VLZ4 mixer must have the highest headroom and lowest noise possible. Strict attention to component quality and tolerances has led to innovations like our custom M80 op-amps and class-leading negative summing bus architecture that add yet another level of assurance that a Mackie VLZ4 mixer is the right choice for your professional audio application.

BUILT LIKE A TANK

Mackie VLZ mixers are truly “Built-Like-A-Tank.” From beer spills to drops from moving vehicles, the testimonials are as endless as the applications Mackie mixers serve. The VLZ4 series is certainly no exception. With a nearly indestructible steel wrap-around chassis and features like grime-resistant rotary sealed pots, you can be sure that buying a Mackie VLZ4 mixer is a solid investment.

VLZ4’s new black powder coat finish, cockpit-inspired controls and high-contrast knobs not only optimize your mixer’s usability in low-light scenarios, it also means your mixer looks as good as it performs.

COMPREHENSIVE AND PROVEN

Mackie’s VLZ4 line is extremely comprehensive, offering mixers of every channel count, every price point, for every application. From the ultra-compact 402VLZ4 for desktop applications to the tour-friendly 3204VLZ4, you can be sure there is a VLZ4 mixer with the right feature set for your needs.

Features:

• Mackie 2404VLZ4 24-channel Mixer
• 24-channel 4-bus mixer featuring Mackie signature high-headroom/low-noise design
• 20 boutique-quality Onyx mic preamps
  • Ultra-wide 60dB gain range
  • 128.5 dB dynamic range
  • +22 dBu line input handling
  • Extended frequency response
  • Distortion under 0.0007% (20Hz – 50kHz)
• Improved RF rejection perfect for broadcast applications
• Phantom power for condenser mics
• Dedicated inline channel compression for critical inputs (ch. 17-20)
• 20 high-headroom line inputs with dedicated inserts
• 3-band EQ with sweepable midrange
• 18 dB/oct 100Hz low-cut filter on mic input channels
• Level, pan, solo and overload/mute LEDs on each channel
• 4 subgroups featuring dedicated inline compressors for total dynamic control
• 6 aux sends with inserts, pre/post fader and internal/external FX send options
• 2 stereo returns and 4 group outs with inserts
• Dual 32-bit RMFX+™ processors featuring 24 “Gig Ready” reverbs, choruses and tap delay for live applications
• Integrated 4×2 24-bit USB interface
  • Stream subgroups or master L/R to your PC or Mac for recording
  • Use your favorite plug-in live via auxes 5/6
  • Convenient stereo return to mains for music playback or return to channel to implement EQ, auxes and more
• PFL/AFL solo modes
• 60mm long-wearing log-taper faders
• High-resolution 12-segment stereo meters
• Sealed rotary control resist dust and grime
• “Built-Like-A-Tank” rugged steel chassis with powder-coat finish
• High-visibility, high-contrast controls deliver convenient “at-a-glance” visual feedback
• Universal power supply for worldwide use

Details:

• Main Mix Noise:  (20 Hz–20 kHz bandwidth, 1/4" main out, channel  gains @ unity, channel EQs flat, all channels assigned to main mix, odd  channels
                               panned left, even channels panned right.)
• Main mix fader unity, channel faders down:  –87.0 dBu (–91.0 dB  Signal to Noise Ratio, ref +4 dBu)
• Main mix fader @ unity, channel faders @ unity: –81.5 dBu
• Total Harmonic Distortion (THD) (1 kHz @ 15 dB gain, 20 Hz–20 kHz  bandwidth)
  • Mic in to insert send <0.001%
  • Mic in to main out <0.005%
• Attenuation / Crosstalk: (1 kHz relative to +10 dBu, 20 Hz–20 kHz  bandwidth, mic in, 1/4" main out, gain @ unity)
  • Channel mute switch engaged: –90 dBu
  • Channel fader down: –88 dBu
• Frequency Response
  • Mic input to main output (gain @ unity): +0, –1 dB, 20 Hz to 50 kHz
                                                                  +0, –3 dB, <10 Hz to >100 kHz
• Equivalent Input Noise (EIN) (Mic input to insert send out, max gain)
  • 150 Ohm termination –128.5 dBu
                                        20 Hz–20 kHz
• Common Mode Rejection Ratio (CMRR)
  • 1 kHz better than –70 dB
• Maximum Levels
  • Mic in: +21 dBu
  • All other inputs: +21 dBu
  • Main mix XLR out: +27 dBu
  • All other outputs: +21 dBu
• Impedances
  • Mic in: 2.7 k Ohm
  • Channel insert return: 2.5 k Ohm
  • All other inputs: 10 k Ohm or greater
  • Tape out: <10 Ohm
  • All other outputs: 120 Ohm
• 3-Band EQ (mono channels)
  • High Shelving: ±15 dB @ 12 kHz
  • Mid Peaking: ±15 dB sweep 100 Hz – 8 kHz
  • Low Shelving: ±15 dB @ 80 Hz
  • Low Cut Filter: 18 dB/octave, –3 dB @ 100 Hz
• 4-Band EQ (stereo channels)
  • High Shelving ±15 dB @ 12 kHz
  • Hi Mid Peaking ±15 dB @ 2.5 kHz
  • Low Mid Peaking ±15 dB @ 400 Hz
  • Low Shelving ±15 dB @ 80 Hz
• USB
  • Format: USB 1.1
  • I/O: Stereo Input, 4 Channel Output
  • A/D/A: 24 bit, 44.1 kHz / 48 kHz
• AC Power Requirements
  • Power Consumption: 55 watts
  • US, JP: 100 – 120 VAC, 50 – 60 Hz
  • EU, UK, AU, CN: 200 – 240 VAC, 50 – 60 Hz
• Operating Temperature: 0° – 40°C/32° – 104°F
• Physical Properties (product)
  • Front Height: 1.8 in / 46.3 mm
  • Rear Height: 6.0 in / 153 mm
  • Depth: 19.1 in / 486 mm
  • Width: 29.4 in / 748 mm
  • Weight: 31.0 lb / 14.1 kg
• Physical Properties (packaged product)
  • Height: 10.6 in / 269 mm
  • Depth: 23.0 in / 584 mm
  • Width: 33.9 in / 861 mm
  • Weight: 37.0 lb / 16.8 kg

Video of RCXFM20E-B:

Description of RCXFM20E-B:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
 
 The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
• XLR Connectors with Internal Strain Relief for Rugged Reliability
• 100% Copper Conductors for Enhanced Signal Clarity
• 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
• Length: 20 Ft
• Color: Black