Package Includes:

• (2) Rockville 12" Subwoofers
• (1) Rockville RDV12 Dual 12” Vented Sub Enclosure
• (1) Kicker 11DX10001 Class “D” Car Audio Amplifier
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

---

Video of W12K6D2:

Description:

Rockville W12K6-D2 12" Subwoofers deliver superior performance and increased power handling with infrasonic bass response surpassing all other woofers in its class. The Rockville K6™ Subwoofers are more than just good looks. They are the complete package.

Rockville K6™ Subwoofers offer some of the clearest, loudest bass around. K6™ Subwoofers feature a newly engineered composite treated pulp paper cone, which is reinforced with Kevlar fibers. The combination delivers the warm but hard-hitting bass that only paper is notorious for while completely eliminates flex and distortion using 360-degree Kevlar dispersion technique. Premium Rockville K6™ Subwoofer technology is built–in-to every facet of the subwoofer beginning with the motor structure. By engineering a high tolerance extended and vented pole piece it allows the K6™ Subwoofer to handle more power and withstand more abuse. In addition the continuous “heat-pump” effect from both spider venting and pole piece venting combine for superior heat dissipation and help to increase the subwoofers low frequency range. The linear progressive-roll Conex spider and heavy-duty steel basket’s perimeter venting guarantee heat dissipation without breakdown. Turn this baby over and you might think you are looking a the exhaust of a modern jet engine. What you are actually seeing is the Rockville unique Aero Vent System, which allows more heated air to pass out of the motor structure while inhaling more cool air from the surrounding atmosphere. Increased vented area = lower operating temperature = increased power handling.

Rockville W12K6-D2 Subwoofers utilize high-temperature, dual voice coils. A ribbed and double laminated foam surround reinforced with Santoprene and double stitched to the cone, provides the cone with added strength and complete control at high excursions. Standard spring-loaded push terminals provide for a quick and secure wire connection. The W12K6-D2 weighs in at 16 pounds. It's a heavy duty subwoofer.

Rockville K6™ subwoofers perform well in both sealed or vented enclosures.

The Rockville W12K6D2 is CEA-2031 compliant and rated with an amazing 800 watts peak and 400 watts RMS. That means you are getting 100% accurate RMS power ratings. These days lots of brands have competitions over how many thousands of watts they can write on the box of their items. The problem is you do not know what you are getting from them. It is easy to print a box that says 3,000 watts Max. Our subwoofers are rated in the same way that other famous brands rate their products. We also feel our manufacturing engineers are the best. The sound quality on our Rockville subs are just amazing. Our engineers who design the subwoofers are all in in the USA and have over 30 years experience manufacturing car audio.

You can feel confident taking a high powered amplifier to these subwoofers. They can handle a ton of abuse!  We actually test our subs with twice the amount of power they are rated at just for fun. These had no issues handling the power and sounding good doing it!

If you are not happy with these, we will call tag them and take them back within 30 days of when you receive them for a full refund. On top of that you get a 1 year exchange warranty for any defects.

If you want the best value in car subwoofers, at the best price, with the best return policies, then we highly recommend these Rockville K6.

K6 Woofer Features:

• Rockville W12K6-D2 12" 800 Watt Dual 2-Ohm Car Subwoofer
• Power Handling: 800 Watts Peak/400 Watts RMS (CEA Rating)
• Kevlar Fiber Reinforced Ultra Stiff Paper Composite Cone
• 3D Injected Poly Dust Cap
• Expanded and Rolled Steel Basket
• High Density Double Laminated Stitched Foam Surround
• Ultra Saturated, High BL Magnetic Motor Gap
• Magnet Motor Heat Sink with Heat Pump Cooling Technology
• Aero Style Oversized Magnet Motor Vent
• High Temperature 4 Layer Aluminum Voice Coil Former
• Dual Layer Linear Progressive Conex Spiders
• Magnet Protection Rubber Band
• Dual Nickel Plated Spring Loaded Push Terminals

Details:

• Impedance: DVC 2-Ohm
• Cutout Diameter: 11.25 Inches
• Mounting Depth: 6.7 Inches
• Frequency Response: 26 Hz to 750 Hz
• Sensitivity: 94dB @ 1w/1m

Enclosure Recommendations:

• Sealed: 0.75 cu. Ft - 1.30 Cu. Ft.
• Vented: 1.0 Cu. Ft. - 3.0 Cu. Ft.
• Vented Tuned at 45Hz: 1.0 cu. Ft. - 3.0 Cu. Ft.

---

Description for Rockville Enclosure:

The RDV12 dual vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RDV12 Dual 12" Vented Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Vented
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 17.75" L x 30.25" W x 13.75 H"
• Top and Bottom Depth: 17.75"
• Mounting Depth: up to 16" (enough depth for any sub on the market)
• Tuning Frequency: 39 Hz
• Port Dimensions: 2.5" x 13" x 12"
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.1 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood and port): 1.55 Cubic Feet

---

You also Get:

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

---

Description Of 11DX1000.1:

Audiosavings can only ship Kicker products to the United States.Sorry, but we can not ship Kicker to Canada or United Kingdom.

---

Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry, so much so, that we GUARANTEE you will be more than satisfied with the sound and value of their products. We urge you to buy this product, test it, and if it doesn’t meet your standards, send it back to us within 90 Days and we’ll give you a 100% FULL REFUND (or store credit). We’ll even give you a return shipping label to ship it back to us!!!

There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.

---

DX-Series Amplifiers provide reliable, relentless power by using trusted KICKER knowledge and upgraded components for enhancing audio in a high-performance, multimedia system. Three new DX Amps add to the extensive lineup of power choices that always exceeds rated power, as documented inside the carton.

All KICKER DX Amplifiers now feature FIT™, or Fail-Safe Integration Technology. Alternators, computers and A/V entertainment result in additional noise pulsing through today's vehicles. FIT utilizes isolated differential inputs, rejecting noise and electrical interference for the quietest operation possible and ultimate audio clarity. FIT also allows KICKER amps to accept output from nearly any factory or aftermarket head unit. FIT comes standard on ALL KICKER DX Amplifiers.

A trio of DX.1 Mono-Channel Subwoofer Amplifiers supplies all the necessary features expected from high-power, monoblock amplifiers that pulverize subwoofers, including a new-for-2011, 250-watt model*. Other DX Sub Amps (both high-efficiency Class D) are rated at 1,000 watts or 500 watts (2 Ohms at 14.4V), offering an 18dB/octave low-pass electronic crossover variable from 50 to 200 hertz. It also includes an 18dB/octave, high-pass subsonic filter variable from 10 to 30 hertz. They provide up to +12dB of bass boost centered at 40 hertz, and include the convenient, mountable ZXRC remote for bass control from the dash. The DX250.1 is remote capable with the ZXRC sold separately.

A muting circuit cancels out additional noise that may surge down the line, so listeners enjoy the cleanest, clearest sound possible. Additionally, a choice of three automatic turn-on modes (remote, DC offset, signal sense) provides ultimate flexibility.

Two new DX-Series Multi-Channel Amplifiers give the listener multiple channels for a choice of installation configurations, including one 5-channel hybrid with a 300-watt sub section. They rate from 50 watts x 4 channels (2 Ohms at 14.4V) up to 100 watts x 4, with internal electronic crossovers and KICKEQ™ Bass Boost for precision tuning. The existing DX200.4 steps up with the newest features as well.

Two DX.2 Stereo Amplifiers offer the same outstanding features, only the smallest one has bumped up to 60 watts/channel (2 Ohms, 14.4V).

While KICKER amps are always covered by a two-year factory warranty, KICKER will provide an additional one-year extended warranty with the purchase of any KICKER installation kit at the time of the amplifier purchase. Consumers should contact any Authorized KICKER Dealer or log onto www.kicker.com for more information.

Features:

• Advanced features at an affordable price with trusted reliable performance
• All amplifers feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Selectable XOVER fixed at 80Hz LOPASS
• RMS Power: 1000 Watts
• CLASS: D
• Impedance: 2 Ohms
• Remote bass included: yes
• Remote bass capable: No
• Dimensions( H x W x L ): 2-1/4" x 8-5/16" x 10-1/4"
• Dimensions( H x W x L ): 5.7 x 21.1 x 26cm
• Frequency response [Hz]: 25-200, +0/-1dB
• Input Sensitivity: High level 250mV-10V, low level 125mV-5V
• Signal-TO-Noise Ration: >95dB, a-weighted, re: rated power
• Active Crossover: 18dB/octave, variable 50-200Hz, low pass
• Subsonic Filter: - 18dB/octave high-pass variable 10-30Hz
• KickEQ™ BOOST: variable to +12dB centered @ 40Hz