Package Includes:

• (2) Rockville 12" Subwoofers
• (1) Rockville RD12 Dual 12” Sealed Sub Enclosure
• (1) Hifonics Brutus BRX1100.1D 1100 Watts Mono Car Amplifier
  
• (1) Cadence WK41 4 Gauge Complete Car Amp Installation Kit
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

---

Video of W12K6D2:

Description:

Rockville W12K6-D2 12" Subwoofers deliver superior performance and increased power handling with infrasonic bass response surpassing all other woofers in its class. The Rockville K6™ Subwoofers are more than just good looks. They are the complete package.

Rockville K6™ Subwoofers offer some of the clearest, loudest bass around. K6™ Subwoofers feature a newly engineered composite treated pulp paper cone, which is reinforced with Kevlar fibers. The combination delivers the warm but hard-hitting bass that only paper is notorious for while completely eliminates flex and distortion using 360-degree Kevlar dispersion technique. Premium Rockville K6™ Subwoofer technology is built–in-to every facet of the subwoofer beginning with the motor structure. By engineering a high tolerance extended and vented pole piece it allows the K6™ Subwoofer to handle more power and withstand more abuse. In addition the continuous “heat-pump” effect from both spider venting and pole piece venting combine for superior heat dissipation and help to increase the subwoofers low frequency range. The linear progressive-roll Conex spider and heavy-duty steel basket’s perimeter venting guarantee heat dissipation without breakdown. Turn this baby over and you might think you are looking a the exhaust of a modern jet engine. What you are actually seeing is the Rockville unique Aero Vent System, which allows more heated air to pass out of the motor structure while inhaling more cool air from the surrounding atmosphere. Increased vented area = lower operating temperature = increased power handling.

Rockville W12K6-D2 Subwoofers utilize high-temperature, dual voice coils. A ribbed and double laminated foam surround reinforced with Santoprene and double stitched to the cone, provides the cone with added strength and complete control at high excursions. Standard spring-loaded push terminals provide for a quick and secure wire connection. The W12K6-D2 weighs in at 16 pounds. It's a heavy duty subwoofer.

Rockville K6™ subwoofers perform well in both sealed or vented enclosures.

The Rockville W12K6D2 is CEA-2031 compliant and rated with an amazing 800 watts peak and 400 watts RMS. That means you are getting 100% accurate RMS power ratings. These days lots of brands have competitions over how many thousands of watts they can write on the box of their items. The problem is you do not know what you are getting from them. It is easy to print a box that says 3,000 watts Max. Our subwoofers are rated in the same way that other famous brands rate their products. We also feel our manufacturing engineers are the best. The sound quality on our Rockville subs are just amazing. Our engineers who design the subwoofers are all in in the USA and have over 30 years experience manufacturing car audio.

You can feel confident taking a high powered amplifier to these subwoofers. They can handle a ton of abuse!  We actually test our subs with twice the amount of power they are rated at just for fun. These had no issues handling the power and sounding good doing it!

If you are not happy with these, we will call tag them and take them back within 30 days of when you receive them for a full refund. On top of that you get a 1 year exchange warranty for any defects.

If you want the best value in car subwoofers, at the best price, with the best return policies, then we highly recommend these Rockville K6.

K6 Woofer Features:

• Rockville W12K6-D2 12" 800 Watt Dual 2-Ohm Car Subwoofer
• Power Handling: 800 Watts Peak/400 Watts RMS (CEA Rating)
• Kevlar Fiber Reinforced Ultra Stiff Paper Composite Cone
• 3D Injected Poly Dust Cap
• Expanded and Rolled Steel Basket
• High Density Double Laminated Stitched Foam Surround
• Ultra Saturated, High BL Magnetic Motor Gap
• Magnet Motor Heat Sink with Heat Pump Cooling Technology
• Aero Style Oversized Magnet Motor Vent
• High Temperature 4 Layer Aluminum Voice Coil Former
• Dual Layer Linear Progressive Conex Spiders
• Magnet Protection Rubber Band
• Dual Nickel Plated Spring Loaded Push Terminals

Details:

• Impedance: DVC 2-Ohm
• Cutout Diameter: 11.25 Inches
• Mounting Depth: 6.7 Inches
• Frequency Response: 26 Hz to 750 Hz
• Sensitivity: 94dB @ 1w/1m

Enclosure Recommendations:

• Sealed: 0.75 cu. Ft - 1.30 Cu. Ft.
• Vented: 1.0 Cu. Ft. - 3.0 Cu. Ft.
• Vented Tuned at 45Hz: 1.0 cu. Ft. - 3.0 Cu. Ft.

---

Description for Rockville Enclosure:

The RD12 dual sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RD12 Dual 12" Sealed Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 13.25” x 13.25” x 32”
• Top and Bottom Depth: 14"
• Mounting Depth: up to 12" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.55 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.25 Cubic Feet

You also Get:

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

---

Description Of BRX1100.1D:

Brutus, or BRX as those close to the gods call it, is all Go & Show. If your system is going to be shown at car shows and other competitions, take a very close look at the Brutus BRX. With an illuminated Hifonics logo, plus the lighted connectors and blue wash of light from the underside of the heatsink, even from a distance judges and friends will know, your system defines Power From The Gods. Brutus BRX is packed with features to enhance sound quality and power.

NGSD Next Generation Super D-Class™
Hifonics has perfected the latest in NGSD digital chip technology to provide you with an extremely efficient, low temperature, high amplification system that others only dream about. There are several options for installation and the mono Next Generation Super D-Class Brutus amplifiers can run at 1,2 or 4-Ohm as well, for an even tighter bass response!

Features:

• Hifonics Brutus BRX1100.1D 1100 Watts RMS Mono Block NextGen Super D Class Car Amplifier
• RMS Power Rating:
• @4-Ohms: 450 Watts x 1 Channels
• @2-Ohms: 800 Watts x 1 Channels
• @1-Ohm: 1100 Watts x 1 Channel
• Ultra-Fi MOSFET Circuit improves power efficiency and sound quality
• LED Power Protect Indicators (Red/Green)
• Variable Bass Boost (0 to +10 dB bass boost)
• Built-in system diagnostics
• Mono Channel operation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
• Illuminated connectors and blue wash light from underneath the heatsink
• Preamp RCA outputs
• Wired Remote Bass Level Control Included
• Level: 200mV-6V
• Variable low-pass filter 35-250 Hz
• Variable sub-sonic filter 15-35Hz
• Frequency response: 10-250 Hz
• 4 gauge power wire required for installation
• CEA-2006 Compliant
• Dimensions: 14.35" x 10.31" x 2.52"
• Click Here To View The User Manual (Link Opens In A New Window)

---

Description Of WK41:

The Cadence WK41 4 AWG (American Wire Gauge) amp kit features high purity copper power and ground cables, along with top of the line 100 % copper RCA cables and all the accessories needed to install your high powered amplifier.
 
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7’ split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Cadence installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Cadence manufactures their kits with more pure copper, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Cadence installation kit will make!

Audiosavings product experts have tested this amp kit against the leading amp kits on the market. Here are the facts from our testing.  The resistance per foot of this kit is extremely low compared to any other amp kit in its range.  The other amp kits we tested it against had resistance ratings that indicated they were an 8 gauge amp kit.  We were more shocked than anyone about these tests, because we used to sell some of those amp kits.  (We now will not sell those any more after learning that they are not up to the quality standards of our installers).

The conclusion is that Cadence does a great job manufacturing amp kits while other brands are deceiving consumers.  Similar kits we tested actually use about 30 % less copper and they will not perform properly.

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets