• (2) Rockville 10" Car Audio Subwoofers
  
• (1) Jeep Wrangler RQJ10D Custom Dual 10" CJ5/CJ7/YJ/TJ/JK Sub Box Sealed Enclosure
• (1) Kicker 41DXA10001 D-Series 1000W RMS Mono Class D Car Amplifier
• (1) Rockville RWK4CU 4 AWG Gauge Complete Amp Installation Wire Kit
  
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals
  

Video of W10K6D2:

CEA Compliant - Legitimate Power Ratings!

Rockville W10K6-D2 10" Subwoofers deliver superior performance and increased power handling with infrasonic bass response surpassing all other woofers in its class. The Rockville K6™ Subwoofers are more than just good looks. They are the complete package.

Rockville K6™ Subwoofers offer some of the clearest, loudest bass around. K6™ Subwoofers feature a newly engineered composite treated pulp paper cone, which is reinforced with Kevlar fibers. The combination delivers the warm but hard-hitting bass that only paper is notorious for while completely eliminates flex and distortion using 360-degree Kevlar dispersion technique. Premium Rockville K6™ Subwoofer technology is built–in-to every facet of the subwoofer beginning with the motor structure. By engineering a high tolerance extended and vented pole piece it allows the K6™ Subwoofer to handle more power and withstand more abuse. In addition the continuous “heat-pump” effect from both spider venting and pole piece venting combine for superior heat dissipation and help to increase the subwoofers low frequency range. The linear progressive-roll Conex spider and heavy-duty steel basket’s perimeter venting guarantee heat dissipation without breakdown. Turn this baby over and you might think you are looking a the exhaust of a modern jet engine. What you are actually seeing is the Rockville unique Aero Vent System, which allows more heated air to pass out of the motor structure while inhaling more cool air from the surrounding atmosphere. Increased vented area = lower operating temperature = increased power handling.

Rockville W10K6-D2 Subwoofers utilize high-temperature, dual voice coils. A ribbed and double laminated foam surround reinforced with Santoprene and double stitched to the cone, provides the cone with added strength and complete control at high excursions. Standard spring-loaded push terminals provide for a quick and secure wire connection. The W10K6-D2 weighs in at 12 pounds. It's a heavy duty subwoofer.

Rockville K6™ subwoofers perform well in both sealed or vented enclosures.

The Rockville W10K6D2 is CEA-2031 compliant and rated with an amazing 800 watts peak and 400 watts RMS. That means you are getting 100% accurate RMS power ratings. These days lots of brands have competitions over how many thousands of watts they can write on the box of their items. The problem is you do not know what you are getting from them. It is easy to print a box that says 3,000 watts Max. Our subwoofers are rated in the same way that other famous brands rate their products. We also feel our manufacturing engineers are the best. The sound quality on our Rockville subs are just amazing. Our engineers who design the subwoofers are all in in the USA and have over 30 years experience manufacturing car audio.

You can feel confident taking a high powered amplifier to these subwoofers. They can handle a ton of abuse!  We actually test our subs with twice the amount of power they are rated at just for fun. These had no issues handling the power and sounding good doing it!

If you are not happy with these, we will call tag them and take them back within 30 days of when you receive them for a full refund. On top of that you get a 1 year exchange warranty for any defects.

If you want the best value in car subwoofers, at the best price, with the best return policies, then we highly recommend these Rockville K6.

K6 Woofer Features:

• Rockville W10K6-D2 10" 800 Watt Dual 2-Ohm Car Subwoofer
• Power Handling: 800 Watts Peak/400 Watts RMS (CEA Rating)
• Kevlar Fiber Reinforced Ultra Stiff Paper Composite Cone
• 3D Injected Poly Dust Cap
• Expanded and Rolled Steel Basket
• High Density Double Laminated Stitched Foam Surround
• Ultra Saturated, High BL Magnetic Motor Gap
• Magnet Motor Heat Sink with Heat Pump Cooling Technology
• Aero Style Oversized Magnet Motor Vent
• High Temperature 4 Layer Aluminum Voice Coil Former
• Dual Layer Linear Progressive Conex Spiders
• Magnet Protection Rubber Band
• Dual Nickel Plated Spring Loaded Push Terminals

Details:

• Impedance: DVC 2-Ohm
• Cutout Diameter: 9 Inches
• Mounting Depth: 5.3 Inches
• Frequency Response: 27 Hz to 750 Hz
• Sensitivity: 92dB @ 1w/1m

Enclosure Recommendations:

• Sealed: 0.50 cu. Ft - 1.50 Cu. Ft.
• Vented: 0.75 cu. Ft. - 1.50 Cu. Ft.
• Vented Tuned at 45Hz: 0.50 cu. Ft. - 2.0 Cu. Ft.

The RQJ10D is a dual Sealed speaker box Which is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. These enclosures are are coated with bedliner spray making them fully waterproof! They are extremely tough and rugged and will last for an extremely long time. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RQJ10D Dual 10" Jeep Wrangler All Years CJ5/CJ7/YJ/TJ/JK Sub Enclosure
• Dual 10" Sealed subwoofer enclosure
• Hardwood MDF
• Machine precision cut mounting holes
• 3/4" USA Heavy Duty MDF Construction
• Finished w/Bed Liner Spray
  
• Top of the line Glue for extra durable adhesion
• Screw down push button terminals
  
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
• Fits Directly Behind Rear Seat/Bench
• Made in the USA

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Dual 10"
• Dimensions in Inches: 18.5" L x 33.25" W x 12 H"
• Mounting Depth: 7” (inches)
• Mounting diameter (hole size): 9” (inches)
• Wood thickness: 5/8” (inch)
• Air space: 1.25 Cubic feet
• Material: Highest-grade MDF wood on the market

Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry. We are so confident that you will be happy with your Kicker purchase from us that we will offer you the following guarantee. We GUARANTEE you will be more than satisfied with the sound and value of any Kicker products purchased from us. We urge you to buy this product; test it; and if it doesn’t meet your standards; send it back to us within 90 Days and we’ll give you a 100% FULL REFUND (or store credit). We’ll even give you a return shipping label to ship it back to us!!!

There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.

• Kicker 41DXA10001 Mono Block Class D Car Amplifier
• 2000 Peak Power/1000 Watts RMS
• RMS Power: 1000 Watts x 1 channel @ 2-Ohms
• RMS Power: 500 Watts x 1 channel @ 4-Ohms
• Kicker FIT™ technology Fail-Safe Integration Technology
• Optimized circuit layout for the most efficient use of all components  and crystal clear sound
• Speaker-level (high-level) inputs with signal sensing for automatic  turn-on
• KickEQ Built-in electronic crossover for precise tuning
• Variable low-pass filter (50-200 Hz, 24 dB/octave)
• Subsonic filter (24 dB at 25 Hz)
• Subsonic subwoofer protection
• Signal to Noise Ratio (ref: 1W, A-weighted) -70
• Dimensions: 12-1/16"W x 7-3/16"D x 2-3/8"H
  

Video of RWK4CU:

Video of RWK4CU:

We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.

We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.

Maximum Power!
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 4-gauge cable? Then look no further than the Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.

The power and ground cables aptly named “Mega Power Cable” is a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.

Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.

The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 120-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.

CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 14-gauge speaker cable included in the 4-gauge kit can handle over 2000 watts of power without heating up or degrading signal quality.

CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.

• Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
  
• 4 Gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
• Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
• The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
• Strand Count: 1862
• BC-5W2 Compliant

• 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
• 3 ft. Frosted Gray 4 gauge ground wire
• 17 ft. Blue 18 gauge remote lead wire
• 25 ft. Frosted Clear/Blue 14 gauge flat speaker wire
• 17 ft. Triple shielded twisted pair RCA cables
• One Mini ANL Fuse Holder with 120 amp ANL fuse
• One 1/2“ black rubber firewall grommet
• One 4 gauge spade terminal
• Two black 12 gauge nickel-plated spade lugs
• Three blue 12 gauge nickel-plated spade lugs
• One black 4 gauge ring terminal
• Ten 6” black zip ties