Package Includes:
- (2) Soundstream 12" Subwoofers Shallow Mount Dual 4-Ohm Slim Sub
- (1) Rockville Dual 12" Shallow Mount 0.56 Cu Ft Car Sub Enclosure Box
- (1) Rockville RXD-M2 3000 Watt/1500w RMS Mono Class D 1 Ohm Amplifier Car Stereo Amp
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit w/RCA's
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Authorized Soundstream Dealer
Description for Soundstream Sub:
An addition to the Stealth family, this shallow mount 12” subwoofer yields the performance of most conventional 12” subwoofers, but needs only 3” for mounting. Consider Stealth-12 optimum for pre-fab under seat and behind rear seat shallow enclosures.
Features:
- Soundstream STEALTH-124 12" 700 Watt Subwoofer, Shallow Mount, Dual 4-Ohm
- MAX Power: 700 Watts
- RMS Power: 350 Watts
- Efficiency (1w/1m dB): 86dB
- Voice Coil Configuration: 2” DVC 4-Ohms
- Mounting Depth: 3”
- Optimum Sealed Box: 1
- Optimum Ported Box: 2
- Aerated Paper Cone for Dynamic, Natural Sound Quality
- Semi-Circular Frame Venting Maintains Thermal Control
- Internal Motor Assembly Reduces Mounting Depth
- UV & Chemical Treated NBR Rubber Surround
- Nickel Plated 8ga. Compression Terminals
- 3” Mounting Depth to Install in Any Vehicle Type
- 2” 4-ohm DVC for Multiple Woofer Application
- Fs (Hz): 29.98
- Qms: 4.53
- Vas (ft3): 2.10
- Cms (mm/N): 0.1787
- Mms (g): 159.37
- Xmax (mm): 13
- Xmech (mm): 19.5
- Qes : 0.81
- Re (Ω): 7.23
- Z (Ω): 8
- BL (Tm): 16.38
Enclosure Specifications:
- Sealed Enclosure: 0.5 - 1.0 Cubic Feet (0.75 Optimal Size)
Click here for the Owners Manual
Video of RXD-M2:
Description:
Over the years, the
technology used to create audio amplifiers has grown by leaps and
bounds. We consider it our mission to use our expertise in developing
the latest technologies and to bring you the absolute best sounding
amplifiers on the market and of course at a reasonable price. From its
clean, sleek design to its high quality components, you will be amazed
at the quality and power that these new Phenom amps offer.
The RXD-M2 is a class D monoblock high power amplifier with 3,000 watts
peak output, 1,500 watts RMS output and 750 watts CEA-2006 rated power.
It is CEA-2006 compliant which makes it easy to compare this amplifier
to other CEA compliant amps on the market. The issue the car audio world
is facing today is that there are so many different brands with
different standards on how they rate their products. Here at Rockville
we offer the best value in car audio. We therefore want to make it easy
for you to compare our products to any brands on the market. So we
provided 3 ratings for all our car amplifiers. We provided a CEA
compliant rating, which you should use to compare this amplifier to
other premium brands that make CEA compliant products such as Kicker,
Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating
that Is not CEA compliant but has become standard in the industry. You
should use this rating when comparing with ratings from brands such as
Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak
rating which almost all brands In the industry provide. This peak power
is the amount of power the amp puts out at the loudest moments during a
particular song.
One of the tricks to determine the real power of a car amplifier is to
multiply the fuse rating by 10 to determine the true RMS power. This
formula almost always works within 20 %. RXD-M2 features Dual Maxi fuses with a rating of 40 Amps each. Compare this to other amps on the market with
similar fuse ratings and you’ll see that with the RXD-M2 you are getting
your money’s worth and then some.
This unit also features a high speed MOSFET power supply and
studio-grade bipolar output stage transistors. It has a fully adjustable
12dB/Octave cross over with differential circuitry. Other features
include a subsonic filter, a fully adjustable bass equalizer, mute and
delay soft start technology, a phase control switch, and a dashboard
subwoofer control for added convenience. The RXD-M2 is protected by a
full IC controlled circuit and has professional peak limiter circuitry
guaranteeing distortion free musical playback at all levels.
The RXD mono amplifiers took years of engineering. A lot of new
technology went into these amps. We call this technology optical coupler
Class-D. This new technology gives the amplifier punchier bass
compared with a typical class “D” amp. A major difference in our OC
technology is the preamp input stage and output stage are separated in
circuitry. It is less susceptible to noise, which typically is picked up
from the preamp input. The RCA input accepts both balanced and
un-balance inputs. If there is potential inference in the car, the
balanced input signal is less susceptible to noise.
The Phenom amps by Rockville use only the top parts. We use Siemens
correction capacitors which are well-known for producing crystal clear
sound quality. We use TL072 OP (power supply) which is composed of
mosfets. Typical class “D” amps use JRC4558, which is composed of
transistors only. Mosfet power supplies have a higher speed, lower loss
rate, lower noise, and ultimately supply more efficient and clean power
along with lower THD (distortion). We redesigned the layout of the PCB
boards to allow the amp to run smooth and cool. Each and everything
amplifier we manufacture is tested twice. Once at the semi-finished PCB
stage of production and then another test is done at the final assembly.
We also run age tests on them. After this is all done, we hire a 3rd
party independent company unaffiliated with our factory or with us to go
to the factory and do random inspections of the power and over 20 other
tests. We guarantee these amps will satisfy you. We are so confident in
your satisfaction of this amplifier that we will offer you a 90 day
money back guarantee. This means if for any reason you want to return
the amplifier back and get a full refund we will send you a label and
take the amp back and give you all your money back. (Amp must be
complete along with the box).
Features:
- Rockville RXD-M2 3000 Watt/1500w RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology
- CEA Compliant Power Ratings (Rated at less than 1
% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc)
- 1 Ohm: 750 Watts x 1 Channel <1% THD+N
- 2 Ohm: 550 Watts x 1 Channel <1% THD+N
- 4 Ohm: 400 Watts x 1 Channel <1% THD+N)
- RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc)
- 1 Ohm: 1500 Watts x 1 Channel
- 2 Ohm: 1100 Watts x 1
Channel
- 4 Ohm: 800 Watts x 1 Channel
- Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song
- 1 Ohm: 3000 Watts x 1 Channel
- 2 Ohm: 2200 Watts x 1 Channel
- 4 Ohm: 1600 Watts x 1 Channel
- 1 Ohm: 3000 Watts x 1 Channel
- High-Speed MOSFET Power Supply
- Optical Coupler Class “D” Technology
- Studio-Grade Bipolar Output Stage Transistors
- Now exclusively with “Professional Peak Limiter Circuitry” which guarantees distortion free musical playback at all levels.
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: 50Hz - 250Hz
- Subsonic Filter: 15Hz - 55Hz
- Phase Control Switch
- Full IC-Controlled Protection Circuitry
- Remote Dashboard Subwoofer Control
- Fully Adjustable 12dB Bass Equalizer
- Mute and Delay Soft Start System
- RCA Preamp Line Output
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- Minimum THD at Rated Power: < 0.05%
- S / N Ratio: > 100dB
- Frequency Response: 10Hz - 500Hz
- Damping Factor: > 250 @ 100Hz
- Dual 40 Amp Maxi Fuse
- Dimensions: (W x H x L) 8.6"x 2" x 13.7"
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Description for Rockville Enclosure
The RDSM12 dual sealed speaker box is made in the USA with Grade “A” 5/8” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. The reason we made these with 5/8" MDF is because we needed to keep the mounting depth as shallow as possible. This uses the best grade "A" wood, and the 5/8" MDF sounds amazing. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RDSM12 Dual 12" Shallow Mount Sealed Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 5/8" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Enclosure Measurements:
- Type of Enclosure: Sealed Shallow Mount
- Enclosure Sub Size: Dual 12"
- Dimensions in Inches: 5.25" L x 36" W x 13 H"
- Top and Bottom Depth: 5.25"
- Mounting Depth: up to 4.625"
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 0.77 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 0.56 Cubic Feet
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815883968
