Package Includes:
- (2) MTX 10" Subwoofer Car Audio
- (1) MTX XTHUNDER1200.1 1200w RMS Mono Amplifier Class D Car Stereo Amp+Bass Remote
- (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
- (1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Authorized MTX Audio Dealer!
Description:
Built for SPL
S65 Series square subwoofers are built to deliver exceptional SPL and the
most bass for your buck.
The S6510-44
The S6510-44 is a 10" dual voice coil, 500 watt, 4 ohm square subwoofer
built on the MTX tradition of getting more than expected.
The S65 Series
The S65 Series is designed for enthusiasts that want to add extreme bass to
their system. With more surface area than a standard round subwoofer and
patented corner geometry that increases Xmax, the S6510-44 square subwoofer
delivers exceptional volume displacement that translates to exceptional SPL. The
woofer features dual layer cooling technology with Spider Plateau Venting
technology that utilizes the subs movement to cool it as it plays and a radial
ribbed t-yoke dissipates heat away from the voice coil through the back plate,
so it doesn't overheat even under intense use.
S65 Series Spider Plateau Venting
This square subwoofer also incorporates Spider Plateau Venting which is a
mechanical cooling process that targets cool air at the voice coil and a radial
ribbed t-yoke that acts as a heat sink effectively managing the subwoofer
temperature for long term performance.
Features:
- MTX S6510-44 10" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer
- RMS Power Handling: 500 Watts
- Peak Power Handling: 1000 Watts
- Recommended Amp Power: 250-500 Watts RMS
- Impedance: Dual 4-Ohms
- Frequency Response: 26Hz - 130Hz
- Sensitivity: 84.5 dB
- Volume Displacement: 45.65 cu in
- Voice Coil: 2" inches
- Mounting Depth: 6.625" inches
- Cut Out Diameter: 9.313" inches
- Patented Surround Geometry: Surround Allows for Increased Xmax Resulting In Higher SPL and Volume Displacement
- Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
- Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
- Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
- Product Dimensions: 11.63" x 34" x 12.25" inches
- Product Weight: 31 Lbs.
Click here for the Installation Guide
Authorized MTX Audio Dealer!
Description:
Extreme Power
Continuing the Legacy that MTX Audio started almost 20 years ago with
the development of the Thunder amplifier series, we introduce the next
generation – XTHUNDER. These amplifiers are designed to deliver extreme
power to the most demanding speaker system designs and are capable of
driving subwoofers and full range speakers alike. The XTHUNDER1200.1
mono block amplifier will power large subwoofers in multiple wiring
combinations with distortion-free performance, easily handling the abuse
of long hours of extreme play.
Built to Drive BIG Sub Systems
Capable of delivering 1200W RMS power into a 1-Ohm load, the XTHUNDER1200.1 is
ideally suited to power MTX SuperWoofers and large, multi-woofer systems. This
is made possible by using high grade materials and a never wavering dedication
to precision workmanship. This is what allows the XTHUNDER Series to deliver
exceptional sound quality and performance.
What's Under the Hood?
We start by using a highly efficient
class D amplifier topology to maximize electrical power efficiency while
ensuring total thermal management, even under extreme use. This is all built on
a dual sided circuit board with oversized copper traces that maximize electrical
flow and minimize power loss before it gets to your speakers. Components are
installed using surface mount technology making the circuit incredibly durable
and vibration resistant allowing them to survive even when used in big bass
systems.
Additional heat management is handled by the top cover which functions as a
large surface area heat sink. This effectively dissipates built-up heat so the
amplifier runs cooler and can play louder, longer. The chassis also includes
removable side covers that create a stealth look when installed, but also allow
for easy access to connections and settings after mounting.
Of course, the XTHUNDER1200.1 isn’t all power and no finesse. It is loaded with
features that enable full customization to ensure the best possible sound
quality without distortion. Using the built-in low pass filter, subsonic filter,
and bass boost you are able to get exactly the sound you want from your
subwoofers every time.
Features:
- MTX XTHUNDER1200.1 1200 Watt RMS Class D Mono Car Amplifier and Bass Remote
- RMS Power Output @ 4 Ohms: 400 Watts
- RMS Power Output @ 2 Ohms: 750 Watts
- RMS Power Output @ 1 Ohms: 1200 Watts
- Signal to Noise Ratio: >60dB
- THD: <0.2%
- Frequency Response: 10Hz - 250Hz
- Maximum Input Signal: 5V
- Max Sensitivity: 100mV
- Low Pass Filter: Variable, 40Hz - 250Hz, 12dB/Oct
- Subsonic Filter: 10Hz - 50Hz, 12dB/Oct, Variable
- Bass Boost: 18dB @ 45 Hz
- Topology: Class D
- Cone Material: Polypropylene
- Class D Topology: Ensures Excellent Thermal Efficiency
- Low Profile Design: Allows for Installation Anywhere
- Cast Aluminum Top Cover: Efficiently Dissipates Heat
- Variable Butterworth Crossover: A 12dB/Oct crossover that allows you to set the frequency your speakers will play down or up to
- Variable Bass Boost: Allows you to boost your bass output by up to 18dB @45Hz
- Variable Subsonic Filter: A variable low frequency, high pass filter designed to block potentially damaging bass frequencies
- Triple Protection Circuitry: Thermal, DC Offset, and Short Circuit Protection circuitry ensures the amplifier will protect itself in the event of a problem
- Product Dimensions (L x H x D): 14.2" x 2.03" x 8.9" inches
Click here for the Owner's Manual
The RDVK10 dual 10" vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure
- Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
- Tuning frequency: 42Hz
Enclosure Measurements:
- Type of Enclosure: Vented
- Enclosure Sub Size: Dual 10" Square
- Dimensions in Inches: 32" Width x 14.5" Depth x 12" Height
- Top and Bottom Depth: 14.5"
- Mounting Depth: up to 13.75" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.6 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.2 Cubic Feet
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Video of RWK4CU:
Authorized Rockville Dealer!
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits
on the market from Kicker, JL Audio, or any other top brands.
Maximum Power!
Looking for a wire kit that has 100% true specifications! A wire kit
that uses 100% copper 4-gauge cable! Then look no further than the
Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation
Kit. This package includes everything you'll need to get your amplifier
system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.
The power and ground cables aptly named “Mega Power Cable” is a no
compromise power cable. Rockville’s engineering team over-built and
designed the cables using thousands of strands of only true 100%
oxygen-free, silver-tinned copper strands. The use of a proprietary
special twisting process reduces “surface skin impedance loss” so that
Mega Power cables have zero signal and power loss, delivering full power
from your battery system to your amplifier even at lengths of 20 feet!
The increased current flow and higher amperage carrying capacity will
increase your amplifiers efficiency and keep your amplifier running
cooler. The SuperFlex outer insulating jacket jacket makes installation
and cable routing simple and easy. The 100% copper stranded wire is
extremely tolerant of the hostile conditions found under the hood in
vehicles and compensates for vibration, heat expansion and flexibility.
This flexible and well-shielded wire is crucial for getting through all
of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum
to give their cables the appearance of a “heavy-duty” cable. But not
Rockville, our True-Spec 100% oxygen free, silver tinned copper
eliminates corrosion, increases current transfer x 10, and won’t
discolor over time.
The superior quality and materials of the Rockville 100% True-Spec
amplifier installation kit is realized in the included accessories and
cable workmanship. Included is a precision CNC cut full size ANL fuse
housing, machined from solid brass and then 14K gold plated for superior
signal transfer and complete with a matching gold plated 120-amp ANL
fuse. The power cable is wrapped in 6 feet of durable nylon braided
tubing to protect it from heat and chafing in the engine compartment.
All installation accessories such as the ring terminals and spade
connectors are nickel plated for superior signal transfer and
durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also
manufactured from 100% copper and woven in to a flat planner design and
coated in our Super-Flex insulation so that it fits under and around
your vehicles trim and carpet smoothly and without bulking up. With
crystal clear sound quality these speaker cables deliver true audio
fidelity from your car audio amplifier to your speakers. The 14-gauge
speaker cable included in the 4-gauge kit can handle over 2000 watts of
power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and
best looking RCA cables available today. Each channel in the RCA cable
is triple shielded first with dielectric internal insulators and then
with a 98% coverage woven shield. All cables are manufactured of 100%
oxygen free copper and feature twisted pair technology for superior
noise rejection and pure sonic signal flow. The RCA plugs are shielded
metal and feature a spiral cut outer ground ring with center split pin
for precise and tight audio connections. The result of all this
technology is noise free-noise rejection signal transfer for optimum
sound quality. You will hear the difference these RCA signal transfer
cables will make.
- Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
- 4 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 1862
- BC-5W2 Compliant
- 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 4 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 14 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One Mini ANL Fuse Holder with 120 amp ANL fuse
- One 1/2“ black rubber firewall grommet
- One 4 gauge spade terminal
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 4 gauge ring terminal
- Ten 6” black zip ties
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely that you will need to use it.
- UPC:
- 613815849247
