• (2) Pair Rockville RMSTS80B 8" 1000w Waterproof Marine Boat Speakers 2-Way Black
• (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
• (1) Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers
• (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator

Video of RMSTS80B:

Includes:

• Pair of 8” marine speakers
  
• 16.4 feet of Speaker Wire
  
• Mounting Screws
  

Description:

The RMSTS80B marine speaker by Rockville is our step up series in our marine speaker lineup that offers a 1” titanium tweeter as well as more power handling! They have a larger magnet and can handle 500 watts RMS & 1000 watts peak! If you are using an external amplifier we recommend this series.

Rockville engineers care about quality and sound more than anything else.

The RMSTS80B was designed in a special molded ABS plastic basket. Our ABS baskets are un-breakable! You can smash these on the floor, or hit them with a sledge hammer and they will not break! We use the highest grade ABS plastic in the world! The polypropylene cone is reliable and sounds great. This same material is used on the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition, rubber is a very waterproof material. The 1” titanium tweeter puts out incredible sounding highs. The low end bass and mids of these speakers are also extremely loud, clear, and punchy!

The RMSTS80B 8” marine speakers were engineered to deliver amazing power and sound quality in the outdoors; be it saltwater, freshwater or any other harsh environment. These speakers can withstand tons of abuse and can handle 1000 watts peak and 500 watts RMS. These Rockville speakers comply with the CEA 2031 Loud Speaker Standard. This same rating standard is used by the highest end marine brands in the industry. CEA compliant means you can rest assured that the ratings are 100% legitimate. (We compared these against other brands and although some of these other brands stated higher wattage, the Rockville RMSTS80B speakers were able to handle more than double the power!)

These speakers come with everything you need for installation including pre mounted grills and mounting hardware.

Using only true marine grade components and materials, the Rockville RMSTS80B speakers are fully marinized against salt & fresh water conditions. They will not get damaged by fresh water, salt water, or moisture. There is also an additional waterproof and UV resistant coating to completely protect the speakers. These speakers also come with a 1-year warranty to give you the peace of mind you deserve when purchasing from Rockville!

Features:

• Rockville RMSTS80B 8” 2-Way 1000 Watt Marine Boat Speakers in Black (Pair)
  
• CEA Compliant Power Ratings
  
• Power Rating: 500 Watts Peak / 250 Watts RMS Per Speaker
  
• System Power: 1000 Watts Combined
  
• 8“ 2-Way Speaker System
  
• Fully Marinized Against Salt & Fresh Water Conditions
  
• Completely Waterproof and rustproof
  
• Stainless Steel Terminals
  
• Molded ABS plastic basket (Our special plastic blend is un-breakable! You can jump on it or hit it with a sledge hammer or run over it with a car, and it won’t crack!)
  
• Polypropylene Mica Injected Cone
  
• Rubber Surround
  
• High quality ferrite magnet
  
• 1” inch Titanium Tweeter
  
• Oversized 1.5” CCAW Kapton Voice Coil
  
• Large Magnet and Motor Structure
  
• Pre-installed mounting screws included
  
• Perfect for both marine, outdoor, and car use
  
• Impedance: 4 Ohms
  
• Frequency Response: 40Hz - 20KHz
  
• Sound Pressure Level: 94dB @ 1w/1m
  
• Total Diameter: 9.13”
  
• Cutout Diameter: 7.24”
  
• Total Height: 4.9”
  
• Mounting Depth: 3.5”

Owner's Manual​​

Videos of RWB:

Includes:

• (2) Wakeboard Speakers
• (2) 360° Swivel Mounting Brackets
• Integrated Grill
• Installation Hardware

Description:

• No exaggerated power ratings: These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 200 watts RMS and 300 watts peak. (200 watts RMS is equal to about 500 watts rated by other brands)
• Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
• These can withstand all elements on the water for a lifetime of worry free use
• The mounting screws are longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.
• We’ve added a new and improved nylon mounting bracket. Nylon is strong, light weight, and can withstand the toughest conditions. The bracket features a special UV coating to protect it from the elements. A 360° rotating mechanism built into the bracket allows you to position the speaker in any direction for optimum listening enjoyment. This also gives you the ability to rotate the speaker to the front or rear of your boat for different applications.

Features:

• Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers
• 8" Two-Way High Fidelity Speaker System
• Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
• Includes Stainless Steel Mounting Hardware
• 1" Polymide Dome Neodymium Midrange Tweeter
• Built-In Two-Way Crossover Network
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Water / Rust Resistant
• Terminals Are Sealed with Rubber Gaskets
• Specially Tuned for PA Voice Over
• Polypropylene Mica Injected Cone with Santoprene Surround
• High BL Magnet Motor Structure
• Y30 High Density Magnets
• Oversized 1.25” Kapton Voice Coil
• Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage.
• These Wakeboards Fit bars ranging from 1.26" 2.87"
• Color: Black
• Includes 65mm and 80mm screws that accommodate Jeep Wrangler and any roll bar
• Includes Stainless mounting hardware that wont rust or corrode

Details:

• Peak Power Handling: 300 Watts
• RMS Power Handling: 200 Watts
• Frequency Response: 60–20,000 Hz
• Sound Pressure Level: 98dB @ 1w/1m
• Impedance: 4 Ohms
• Mounting Depth: 10.5"

Owner's Manual

Video of RXM-S6:

Includes:

• Amplifier
• PA Microphone
• Bass Remote
• Mounting Screws

Description:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

Before we talk about the actual amplifier, I wanted to point out that we included a microphone. Most brands do not do this. We wanted to provide you guys with the best sounding marine amplifier of course. But we also wanted to give you the ability to have a microphone so you can use all the power of the system to communicate when out on the water. This will give you many new applications of what you can use your marine system for. We included a special circuitry in the amplifier that when you talk through the microphone the music will get lower and when you are done talking the music will go back to normal volume.

The RXM-S6 is a 6 channel amplifier with 2,600 Watts peak output and 420 Watts RMS (6 x 70 @ 4 Ohms). You can also bridge the amplifier and get 3 x 440 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This 6 Channel marine amplifier is amazing. It gives you amazing options for your marine speakers and/or subwoofers. Here are some wiring configurations. You can run 4 channels to (4) full range speakers, and then 2 of the channels to (2) subwoofers. You can also run those last 2 channels to wakeboard speakers if you wanted.

You can also run 2 speakers to each channel and connect for a total of 8 speakers to the 4 channels, and then you still have 2 channels left for your subwoofer(s). Another option would be to connect 12 full range speakers.

You can bridge any of the 2 channels together which means you can run this is a 6 channel, 3 channel, or 4 channel amplifier. So if you need 1 channel to have double the power, you can just bridge 2 channels into 1 and double the power.

The RXM-S6 has a conformal coating on its PCB (printed circuit board) in order to protect against moisture, dust , chemicals, and temperature extremes. This coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior screws are made of stainless steel to better withstand the elements. This amplifier is fully marine-rated from start to finish.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. RXM-S6 features (2) 60 Amp Maxi Fuses. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXM-S6 you are getting your money’s worth and then some.

This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. This also has pre-amp inputs allowing you to install the amplifier to the pre-amp output of your receiver or you can get the signal to the receiver through the speaker level inputs.

Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch/ 6 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXM-S6 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  
  • 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N
  • 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD
  • 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms)
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• CH 1 - 6
• Low Pass 50Hz - 250Hz
• High Pass 50Hz - 250Hz
• Full IC-Controlled Protection Circuitry
• Fully Adjustable Bass Equalization Control
• 2 Ohm Stable Stereo
• 4 Ohm Mono Bridgeable
• 3 Channel Mixed-Mono Capable@ 4 Ohm
• 2 CH / 4 CH/ 6 CHInput Mode Selector
• Mute and Delay Soft Start System
• Remote Dashboard Subwoofer Control
• 8 Volt Preamp Circuitry
• ELNA Brand Audiophile Quality Capacitors
• Status Mode LED Indicator
• Frequency Response: 10Hz - 40KHz
• Minimum THD at Rated Power: < 0.05%
• S / N Ratio: > 100dB
• Damping Factor: > 200 @ 100Hz
• Dual 60 Amp Maxi Fuses
• Dimensions: (W x H x L) 8.66" x 2.09"x 16.14"

Owner’s Manual

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.

Video of RMWK:

Features:

• Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
• 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 25’ Blue Remote Wire
• (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 120A Mini-ANL Fuse
• (1) 80A Mini-ANL Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (5) Speaker Cable Terminals
• (1) Washer
• (10) White Cable Ties

Owner's manual