- (1) KICKER 43KMW102 10" 300w Peak/150w RMS Marine Subwoofer Sub 2-Ohm KMW10 KM10
- (3) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin
- (2) Pair Rockville RMC80B 8" 800 Watt Waterproof Marine Boat Speakers 2-Way Black
- (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier/Amp Installation Wire Kit
- (1) Rockville RXM8BTW 8 Channel 1500 Watt Marine Bluetooth Amplifier
Authorized Kicker Dealer!
KM10 subs are designed specifically for boat audio with weather-proof qualities that meet or exceed industry standards.
150 Watts RMS
This 10-inch (25cm) sub with 150WRMS power handling is designed specifically for boats and the outdoors.
Exceeds Industry Standards
Designed specifically for boat audio with weather-proof qualities that meet or exceed industry standards. Features an injection molded cone and tough Santoprene® surround, both UV-treated to combat the weather.
Light Show
Add LED grilles (sold seperately) with seven selectable LED colors! Add the KMLC LED controller for 20 total colors and 19 different lighting modes to make it even more fun! Non-LED grilles also available.
Features:
- KICKER 43KMW102 10" 300w Peak/150w RMS Marine Subwoofer 2-Ohm
- Woofer: 10 in. (25 mm)
- Peak Power Handling: 300 Watts
- Continuous Power Handling (RMS): 150 Watts
- Recommended power range: 75 - 150 RMS
- Injection-molded polypropylene cone
- Santoprene surround
- Locking and splash-proof terminal cover
- Single voice coil
- Adjustable, removable LED accent lighting built into optional grille
- Water-resistant component, sealed motor structure
- Stainless steel hardware
- Frequency Response: 30Hz -500Hz
- Sensitivity: 86.5 dB
- Resonance Frequency (Fs): 32
- Sealed Enclosure Volume Min-Max: 1-2.4 cubic ft.
- Vented Enclosure Volume Min-Max: 1.25-1.75 cubic ft.
- Mounting Depth: 5 in. (12.7 cm)
- Mounting Hole Diameter: 9-1/4 in. (23.3 cm)
Advantages of purchasing from an authorized seller:
- Best prices - We sell all Kicker products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Kicker product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Kicker products from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Description:
Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Features:
- Rockville MRCA25 RCA Interconnect Cable
- 25’ Ultra-Flexible PVC Shield
- Twisted Pair
- Premium Audiophile Marine RCA Interconnect Cable
- High Performance Water Proof RCA Plugs
- Tinned Copper Strands for Sonic Purity
- Outstanding Noise Rejection, Accuracy, and Frequency Response
Video of RMC80B:
Unboxing Video of RMC80B:
Includes:
- Pair of 8" marine speakers
- 16.4 feet of Speaker Wire
- Mounting Screws
The RMC series of marine speakers by Rockville are a major upgrade to our old RMS series. Don’t get me wrong we loved our old series, but we strive for perfection. We wanted a speaker that is more durable, more water resistant, can handle more power, and put out better sound quality!
As always we sent our team on a speaker-hunting adventure. We tested countless prototypes until the RMC series was born. We ended up with a speaker that has a lot more bass and mids than any other speaker on the market at this price point. This speaker will destroy all those cheap dual cone speakers, and it will compete with top branded marine speakers on the market today!
These speakers are completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage. Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!
Rockville engineers care about quality and sound more than anything else. The RMC80B was designed in a molded ABS plastic basket. The polypropylene cone is reliable and sounds great. This material is used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition rubber is a very waterproof material. The ½" polymer tweeter puts out incredible sounding highs. The low end bass and mids of these speakers really makes them stand out.
The RMC80B 8" marine speakers were engineered to deliver amazing power and sound quality in the outdoors; be it saltwater, freshwater or any other harsh environments. These speakers can withstand tons of abuse and can handle 400 watts peak and 100 watts RMS each. These Rockville speakers comply with the CEA 2031 Loud Speaker Standard. This same rating standard is used by the highest end marine brands in the industry. CEA compliant means you can rest assured that the ratings are 100% legitimate. (We compared these against other brands and although some of these other brands stated higher wattage the Rockville RMC80B speakers were able to handle more than double the power!)
Using only true marine grade components and materials, the Rockville RMC80B speakers are fully marinized against salt & fresh water conditions. They will not get damaged by fresh water, salt water, or moisture. There is also an additional waterproof and UV resistant coating to completely protect the speakers.
The speakers come with everything you need for installation including pre mounted grills and mounting hardware.
Features:
- Rockville RMC80B 8” 2-Way 800 Watt Marine Boat Speakers in Black
- CEA Compliant Power Ratings
- Power Rating: 400 Watts Peak /100 Watts RMS Per Speaker
- System Power: 800 Watts Combined
- 8“ 2-Way Speaker System
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Waterproof and rustproof
- Stainless Steel Terminals
- Molded ABS plastic basket
- Polypropylene Mica Injected Cone
- Rubber Surround
- High quality ferrite magnet
- 13mm (0.5” inch) Polymer Tweeter
- Oversized 1” CCAW Kapton Voice Coil
- Pre-installed mounting screws included
- Perfect for both marine, outdoor, and car use
- Impedance: 4 Ohms
- Frequency Response: 40Hz - 20KHz
- Sound Pressure Level: 91dB @ 1w/1m
- Total Diameter: 9.65”
- Cutout Diameter: 7.36”
- Total Height: 4.8”
- Mounting Depth: 3.54”
Video of RMWK4:
Unboxing Video of RMWK4:
Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!
Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.
Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.
Features:
- Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
- 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1PC 60A Mini-ANL Fuse
- 2PCS Ring Terminals
- 2PCS Spade Terminals
- 5PCS Speaker Cable Terminals
- 1PC Washer
- 10PCS White Cable Ties
Description:
Rockville RXM8BT Marine 8 Channel Digital Class D Power Amplifier with Bluetooth Wireless Integration.
The Rockville Proton
Series Marine
amplifiers are engineered with advanced technologies. These amps are a
full solution to your marine audio needs. Gone are the old days where
people bring CD's on their boat or listen to FM radio that cuts in and
out. Gone are the days where you need a receiver and multiple amplifiers
to power your speakers. Gone are the days where you have wires running
throughout your boat. Welcome to the marine system of the future! The
Rockville RXM8BT will change your life! This is an 8 channel amplifier
with Bluetooth built in! The Bluetooth will allow you to stream music
wirelessly from a Bluetooth enabled MP3 player or smartphone. Of course
the RXM8BT features "zero noise" RCA differential preamp inputs and
preamp outputs for system expansion. This means you can connect any
audio device through the RCA input. But it's the high quality Bluetooth
that will blow you away. It offers advanced streaming from almost any
music device. Now you can easily play your iTunes, Pandora, Rhapsody and
Spotify directly from your smart phone directly to all 8 channels of
your amplifier. Even more importantly though, is the capability of the 8
channel amplifier. We feel this is the best marine amplifier on the
market even if it did not have the Bluetooth capability which it has. It
offers more system flexibility and more power than anything even
remotely close to this price. I almost forgot to mention how good the
sound quality is.
The Rockville Proton Series Marine amplifiers utilize Texas Instruments patented switching technology to deliver class-leading sonic performance and extremely high power from what seems like an impossibly miniature package. The Proton Series' dimensions are made possible by its outstanding efficient class D design which is over 90%efficient. The result is more power in your boat with less current drain. Proton Series amplifiers are 2 ohm stable in stereo and 4 ohm in mono.There are so many options of configurations. Any 2 channels can be bridged to 1 channel. So for example, you can bridge 4 channels to 2 channels and still have an additional 4 channels remaining. You can simply plug 1 speaker to each channel. You can use 2 or 4 of the channels for subwoofers and the rest for your full range speakers. The configuration options are amazing with this amplifier. Whether you have 4 speakers, or 16 speakers, and whether you do or do not have subwoofers, this amplifier will power your system. With a smart auto thermal reset circuit, Proton Series amplifiers are almost impossible to shut down. When they get too warm, the thermal circuit reduces power by up to a third until they cool down enough to power up again at full power. And mixed impedances on different channels are no problem with the advanced rail voltage circuitry design.
This amplifier is so awesome I almost forgot to write about the most important thing. How much power the thing has. The short answer is a boatload!
But in all seriousness,
this
amplifier is extremely powerful. The true RMS ratings are 65 watts x 8
at
4 ohms or 95 watts x 8 at 2 ohms. This is the CEA compliant ratings. CEA
compliant means the ratings are rated with the exact same rating
standards as the top brands in the industry such as Kenwood, Alpine,
etc. In total this has 750 watts RMS and 1,500 watts peak output. There
are not many marine amplifiers on the market with this much power. Other
brands out there will rate their amps at thousands of watts but in
reality are only a hundred or 200 watts. But this Rockville
amplifier is legitimate and will produce or exceed its rated power. To
prove the power; you can check the fuse rating. This amplifier is
equipped with an 80A fuse. To proe the power; you can look at the fuse
rating. A
general rule for 12 volt amplifiers is if you multiply the fuse rating
by 10 that is close to the real power you will get. In this case that is
800 watts RMS (we rate it at 750w RMS since this is CEA compliant).
Features:
- Rockville RXM8BTW 8 Channel 1500 Watt Marine Amplifier W/Bluetooth White
- Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!)
- 1500 Watts Peak System Power
- 750 Watts RMS System Power
- RMS Power Output at 4 Ohms: 65 Watts x 8 Channels CEA Rated
- RMS Power Output at 2 Ohms: 95 Watts x 8 Channels
- RMS Bridged Power Output at 4 Ohms: 190 Watts x 4 Channels
- Peak Bridged Power Output at 4 Ohms: 380 Watts x 4 Channels.
- Configurable to 8-6-4 channels or 6.1 or 4.2 System
- Bluetooth Wireless with Auto Pairing
- UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure
- Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture
- LED Power and Protect Indicators
- TI Digital Class D Audio Topology
- High Speed MosFET Power Supply
- Studio Grade Bipolar Output Stage Transistors
- Micro Size Architecture with SMD Component Circuitry
- Compact Design and High Power
- Non-Corrosive High Gloss White Aluminum Casing
- Selectable Bass
- Non-Corrosive Brushed Aluminum Casing
- Conforms to the American Boat and Yacht Council (ABYC) Marine Electronic Standards
- Bass Equalization: Fully Adjustable 0 - 12dB at 45Hz
- 4-Way System Protection Circuitry (DC, Short, Thermal, Overload)
- Heavy-Duty Aluminum Alloy Heat-sink
- Stainless Steel RCA Level Inputs
- Stainless Steel Bolt Down Molded Terminals
- 4CH / 8CH Input Selector Mode
- Independent Crossover Controls between CH1-4 and CH5-8
- Full Range / Low Pass / High Pass Configurable
- Variable High-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
- Variable Low-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
- Frequency Response: 10Hz - 40KHz
- S/N Ratio: >100dB
- Minimum THD: <0.05%
- Damping Factor: >200 at 100Hz
- Input Voltage: 150mV - 6V
- RCA Line Output
- 80A Fuse rating!
- Channel Seperation: >60dB
- Input Impedance: 22K
- Dimensions 6.7" W x 2" H x 11.5" L
Video of RXM-S6:
Includes:
- Amplifier
- PA Microphone
- Bass Remote
- Mounting Screws
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
Before we talk about the actual
amplifier, I wanted to point out that we included a microphone. Most
brands do not do this. We wanted to provide you guys with the best
sounding marine amplifier of course. But we also wanted to give you the
ability to have a microphone so you can use all the power of the system
to communicate when out on the water. This will give you many new
applications of what you can use your marine system for. We included a
special circuitry in the amplifier that when you talk through the
microphone the music will get lower and when you are done talking the
music will go back to normal volume.
The RXM-S6 is a 6 channel high power
amplifier with 2,600 Watts peak output, 1320 Watts RMS output (6 x 220 RMS @ 2 Ohms) and 780 Watts RMS (6 x 130 @ 4 Ohms). You can also
bridge the amplifier and get 3 x 440 Watts RMS @ 4 Ohms. The CEA-2006 compliant rating is 70 Watts x 6 @ 4 Ohms and 110 x 6 @ 2 ohms <1%
THD. Most brands do not use CEA compliant ratings because quite simply they do not want you to be able to compare their amps to others on the
market. Over here at Rockville, we want you to be able to compare our amps to any brand on the market. For this reason we are supplying you
with multiple ratings. The CEA compliant rating should be used when matching up or comparing this amplifier to other CEA compliant brands
such as Kicker, Rockford Fosgate, Alpine, etc. We also supply an RMS rating which should be used when comparing with great brands that are
not CEA compliant such as Hifonics, Earthquake, Powerbass, etc. The peak rating is simply what the amplifier can hit for a split second at the
highest point of a song. This rating from any brand is not really important. RMS and CEA ratings truly are the most important.
This 6 Channel marine amplifier is amazing. It gives you amazing options for your marine speakers and/or subwoofers. Here are some wiring configurations. You can run 4 channels to (4) full range speakers, and then 2 of the channels to (2) subwoofers. You can also run those last 2 channels to wakeboard speakers if you wanted.
You can also run 2 speakers to each channel and connect for a total of 8 speakers to the 4 channels, and then you still have 2 channels left for your subwoofer(s). Another option would be to connect 12 full range speakers.
You can bridge any
of the 2 channels together which means you can run this is a 6 channel, 3
channel, or 4 channel amplifier. So if you need 1 channel to have
double the power, you can just bridge 2 channels into 1 and double the
power.
The RXM-S6 has a conformal coating on its PCB (printed circuit board) in
order to protect against moisture, dust , chemicals, and temperature
extremes. This coating protects the amplifier from the elements of the
ocean. If water gets sprayed on the amplifier you will not have to
worry. The exterior screws are made of stainless steel to better
withstand the elements. This amplifier is fully marine-rated from start
to finish.
One of the tricks to determine the real power of a car
amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. RXM-S6 features (2) 60 Amp Maxi Fuses.
Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXM-S6 you are getting your money’s worth and
then some.
This unit also features a high speed MOSFET power
supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over
with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to connect to the factory speaker wires.
They are called High Level inputs because they convert the high voltage running through factory speaker wires to one the amplifier can handle.
This also has pre-amp inputs allowing you to install the amplifier to the pre-amp output of your receiver or you can get the signal to the receiver through the speaker level inputs.
Other features include Auto-Start Smart
turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote
Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch/ 6 ch input mode switch, mute and delay soft start technology, and a crossover
band-pass control. The RXM-S6 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing
distortion free musical playback at all levels.
We are so confident that you will be extremely
satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days.
If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with
accessories and original box please).
Features:
- Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 1300w RMS
- CEA Compliant Power Ratings:
- 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N
- 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD
- 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD
- RMS Power Ratings
- 1300 Watts (6 x 220 Watts RMS) @ 2 ohms
- 1300 Watts (3 x 440 Watts RMS) @ 4 ohm Bridged
- 780 Watts (2 x 130 Watts RMS) @ 4 ohms
- 1300 Watts (6 x 220 Watts RMS) @ 2 ohms
- Peak Power: 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms)
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- CH 1 - 6
- Low Pass 50Hz - 250Hz
- High Pass 50Hz - 250Hz
- Full IC-Controlled Protection Circuitry
- Fully Adjustable Bass Equalization Control
- 2 Ohm Stable Stereo
- 4 Ohm Mono Bridgeable
- 3 Channel Mixed-Mono Capable@ 4 Ohm
- 2 CH / 4 CH/ 6 CH Input Mode Selector
- Mute and Delay Soft Start System
- Remote Dashboard Subwoofer Control
- 8 Volt Preamp Circuitry
- ELNA Brand Audiophile Quality Capacitors
- Status Mode LED Indicator
- Frequency Response: 10Hz - 40KHz
- Minimum THD at Rated Power: < 0.05%
- S / N Ratio: > 100dB
- Damping Factor: > 200 @ 100Hz
- Dual 60 Amp Maxi Fuses
- Dimensions: (W x H x L) 8.5" x 1.8" x 16.1"
- UPC:
- 613816014958
