Package Includes:
- (1) Pair of Alpine R-S65C.2 300 Watt 6.5" Car Audio Component Speakers w/1” Tweeters
- (1) Alpine R-A60F 600 Watt RMS 4-Channel R-Series Car Audio Amplifier Class D Amp
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Description of R-S65C.2:
With the R-Series speakers' innovative material that delivers more output, the speakers produce dependable performance for a loud and fun experience.
FOR LIVING LOUD AND HAVING FUNIf you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
MORE OUTPUT FOR MORE FUN
The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output.
The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and reduced footprint, which contributes to easier installation.
EXCLUSIVE CONE TECHNOLOGY
The R-Series speakers use Alpine’s exclusive cone technology, Carbon Fiber Reinforced Polymer (CFRP), which is a high-strength, lightweight material. CFRP can be custom-formed so that its fibers align in the same direction as the curve and shape of the cone, thereby reducing resonant peaks and increasing the speakers’ mid-bass performance and dynamic range. CFRP is also used as a tweeter diaphragm, enabling the speakers to perform into the 45kHz range and making them compliant with High-Resolution Audio playback.
BETTER FITMENT WITHOUT SACRIFICING MOTOR FORCE
The R-Series speakers use a neodymium magnet which gives them a shorter overall height, compared to other speaker brands. The R-Series speakers also use a new, shallower grill design. The result: An improved fitment design that lets the R-Series speakers fit into tighter install locations without sacrificing motor force.
Specification:
- 6.5” Component Speakers
- CTA-2031: 100W RMS per speaker/300W Peak Power per speaker
- Nominal Impedance: 4ohm
- Frequency Response: 65Hz-40kHz
- 1” CFRP Dome Tweeter
- CFRP Cone
- H.A.M.R. Surround
- 35mm Voice Coil
- Hi-Res Audio Compatible
- Sensitivity: 88 dB SPL (1W@1m)
Description of R-A60F:
The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience.
HI-RESOLUTION AUDIO COMPLIANT
The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes
the classic Class-D amplifier circuit and adds dual post-filter feedback loops
for unmatched accuracy and control. This technology., originally launched in the
premium X-Series amplifiers,, produces efficient power with enhanced dynamic
range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant.
PROPER SOUND STAGE
This new technology minimizes audible imperfections like excessive phase shift
and internal noise which can deteriorate sound quality. With an incredibly low
phase shift of 46°, the R-A60F 4-channel amplifier delivers accurate imaging
compared to well over 100° of phase shift by a competitive amplifier model. This
superior phase curve ensures a proper sound stage among the singers and
instruments.
TUNED FOR THE MUSIC YOU LIKE
The R-Series amplifiers are tuned for a proper sound stage to make your music
sound even better, no matter the genre you prefer. Like hip hop? These
amplifiers deliver punchy notes with low extension. Prefer rock? The R-Series
amplifiers will make you feel the power and energy of percussion, highs, and
lows.
NEXT LEVEL SYSTEM BUILDS
R-Series amplifiers have a built-in bandpass filter which lets you design an
active speaker set-up without a separate processor. Improve the sound quality of
component speakers by ditching your passive network. Avoid added phase shifts
and power losses by individually powering each component and assigning your own
frequency bands for the incredible sound you’re looking for.
THE LOUDEST FAMILY ON THE BLOCK
The “R” line of speakers and subwoofers have a heritage of sound quality you can
hear from a block away, and the newly added R-Series amplifiers are no
exception. Aside from their best-in-class performance, these amplifiers are
tuned to emphasize the characteristics of the R-Series speakers and subwoofers,
giving you that legendary R-Series experience .
Specifications:
- Alpine’s Class D Amplifier Circuit with Dual Post-Filter Feedback Loops
- CTA-2006-B Power Rating: 100W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N); 150W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
- Bridged: 300W x 2 (4ohm, 14.4V, ≤1% THD+N)
- S/N ratio: >85dB (ref: 1W into 4 ohm), 106dB (at rated power)
- THD+N ≤0.03% (ref: 1W into 4 ohm)
- Frequency Response: 10Hz-45kHz (+/- 3dB)
- Damping Factor >500
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- UPC:
- 613816269358
