- (2) Pairs of MB Quart NK1-169 6x9" 480w Nautic Marine Speakers 4 Boat/ATV/UTV/RZR/Cart
- (1) MB Quart GMR-2.5 Bluetooth Gauge Receiver w/Aux+Apple Control 4 RZR/ATV/UTV/Cart
- (1) MB Quart NA710.5 710 Watt RMS 5-Channel Nautic Marine Boat ATV Amplifier Amp
- (1) MB Quart NW1-254 10" 600 Watt Shallow Marine Subwoofer For Boat/RZR/ATV/UTV/Cart
Authorized MB Quart Dealer!
Description of NK1-169:
A high-end sound, marine certified premium 6x9" coaxial speaker for boats, RV's, off-road vehicles or project vehicles audio installation needs. The speakers feature water resistant components to the IPX67 standard, including midrange cones, titanium tweeters and rust resistant connectors.
Features:
- Pair MB Quart NK1-169 6x9" 280 Watt Marine Speakers
- RMS Power Handling: 70 Watts
- Peak Power Handling: 140 Watts
- Minimum Impedance: 4 Ohms
- Frequency Response (+/- 3dB): 60Hz - 20kHz
- Frequency Response (+/- 10dB): 27Hz - 22kHz
- Sensitivity: 92 dB
- Mounting Diameter: 5.85" x 9.69" inches
- Outside Diameter: 6.7" x 9.68" inches
- Mounting Depth: 3.5" inches
- Mounting Height With Grill & Gasket: 1" inch
- Certifications: IPX67, Conformal Coated, UVA Certified, CEA426B
- Marine Certified: IP67 Rating. Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand
- 1" Pure Titanium Dome Tweeter: Very smooth musical response, high output with minimal required amplifier power
- Water Resistant Spider: Woven red aramid fiber composite spider to stabilize the cone and voice coil in all musical situations. Armid fibers do not degrade over time and are not susceptible to temperature swings
- 6x9" Composite Poly Midrange: UVA Protected, water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
- High Temperature Voice Coil and Former: Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight
- High Energy Y30 Motor Assembly: High energy strontium ferrite magnet for higher output with minimal amplifier power
- Marine Certified Crossover: Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
- Product Dimensions: 12" x 10.25" x 15.69" inches
- Product Weight: 8.1 Lbs.
Click here for the Quick Start Guide
Description of GMR2.5:
MB Quart GMR-2.5, Bluetooth
AM/FM gauge mount radio features Apple® control which brings more control
between your Apple devices. Internal 4 channel amplifier delivers 160 watts,
including aux input and pre-amp outputs.
MB Quart has been Defining Music for years. Our engineering and design teams now
push the envelope on audio designed for Marine and Powersports applications even
further. At MB Quart, we have pushed our NAUTIC line, typically thought of as
marine products, into a full blown powersports line up. Now, we can think of
NAUTIC from MB Quart as the best there is for SAND & SEA.
MB Quart offers several solutions to put music into an audio system including
the GMR line; the most technically advanced AM/FM source unit ever conceived by
the MB Quart engineering team. MB Quart Nautic GMR Marine & Powersports source
units are the perfect solutions for any vehicle that will be exposed to the
elements. MB Quart Nautic source units have been extensively tested to be
waterproof, dust proof and UV stable.
Features:
- MB Quart GMR-2.5 Bluetooth Gauge Receiver with Aux + Apple Control for RZR/ATV/UTV/Cart
- RMS Power Handling: 20 Watts x 4 Channels (Totaling 80 Watts)
- Peak Power Handling: 40 Watts x 4 Channels (Totaling 160 Watts)
- Minimum Impedance: 4 Ohms
- Frequency Response: 20Hz - 20kHz
- Pre-Amp Output: 1 Pair RCA
- Audio Inputs: Aux Input through RCA
- LED Display with Backlight
- Mounting Hole: 3.12" inches
- Mounting Depth: 2.87" inches
- Mounting Bezel: 4.15" inches
- Bluetooth Range: 32 Feet
- Marine Grade Protection: Meets or Exceeds IPX67 requirements. This product has been designed and tested against the elements. Waterproof, dustproof, snowproof or shockproof. Built to handle the outdoors
- Apple Control: Quick control and access of iTunes collection with iPhone, iPod and iPad
- Source Type: AM/FM/Bluetooth® Enabled Gauge Mount Radio allows all access to radio stations and content from Bluetooth enabled devices
- Input Types: Bluetooth, RCA, USB
- Control Buttons: Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off are all protected from the elements with the large waterproof button. Their size and space also makes them easy to operate with riding gloves on
- Bluetooth Connect: Bluetooth® Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process
- Secure Simple Pairing: Quick and secure wireless connection between your Bluetooth enabled device. This reliable connection is impervious to outside interference, providing a lock-tight connection to your audio system
- Built-In Power: Four channels with 40 watts of output. These channels remain active when running external amplifiers (RCA Output) to run additional speakers in the cabin
- Product Dimensions: 12" x 10.25" x 15.69" inches
- Product Weight: 7.5 Lbs.
Click here for the Owner's Manual
Description of NA710.5:
Five channel Nautic Marine audio amplifier with onboard electronic crossover, bass boost and adjustable input sensitivity. Allow for four channel full range operation and dedicated subwoofer channel.
Features:
- MB QUART NA710.5 710 Watt RMS 5-Channel Nautic Series Marine Boat Amplifier
- Circuit Topology: Class A/B
- Voltage Gain: 0.2V~6.0V
- Signal to Noise: >93dB
- Frequency Response: 10Hz-45kHz
- Crossover Type: Electronic 12dB Per Octave
- Crossover Frequency Range CH1 & CH2
.....Hi Pass 50Hz - 4kHz
- Crossover Frequency Range CH3 & CH4
.....Hi Pass 250Hz - 4Khz
.....Low Pass 40Hz-250Hz
- Tone Control: Bass EQ 0~10dB@45Hz
Specifications:
- Power @ 2-Ohms: 4 x 90 + 1 x 350 watts
- Power @ 4-Ohms: 4 x 60 + 1 x 200 watts
- Mono Bridged @ 4-Ohms: 2 x 180 watts
- Total Channels: 5
- Audio Inputs: RCA
- Audio Outputs: Full Range RCA
- Wire Gauge 12v/GND: 4-GA
- Wire Gauge Speakers: 10-GA
- Fusing: 50 Amps x2
- Weight: 10.8 lbs (4.8 kilos)
- Dimensions: 17.9" x 9.4" x 2.2" (45.4 x 23.8 x 5.5cm)
Description of NW1-254:
The marine certified, single voice coil NW1-254 shallow subwoofer has been designed for those marine and powersports applications where space can be an issue. With only 2.83 inches of mounting depth, it can fit in any bench seat, gunnel or shallow compartment without giving up much space at all. Designed to perform optimally in free-air applications, the NW1-254 will also perform in as small as .45 cubic feet sealed enclosure.
Features:
- MB Quart NW1-254 10" 600 Watt Shallow Marine Subwoofer
- RMS Power Handling: 300 Watts
- Peak Power Handling: 600 Watts
- Minimum Impedance: 4 Ohms
- Sensitivity: 82 dB
- Mounting Diameter: 9.05" inches
- Outside Diameter: 10.72" inches
- Mounting Depth: 2.83" inches
- Mounting Height with Grill & Gasket: 4.65" inches
- Certifications: IPX67, Conformal Coated, UVA Certified, CEA426B
- Marine Certified: IP67 Rating. Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand
- Shallow Mount/Low Profile: Designed to fit in less than 3" of depth. Ideal for sealed enclosures
- Water Resistant Spider: Woven red aramid fiber composite spider to stabilize the cone and voice coil in all musical situations. Armid fibers do not degrade over time and are not susceptible to temperature swings
- 10" Composite Injection Molded Poly Cone: UVA Protected, water resistant composite polypropylene cone with NBR rubber surround mounted on a lightweight Fiber Reinforced Composite Frame
- High Temperature Voice Coil and Former: Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight
- High Energy Y30 Motor Assembly: High energy strontium ferrite magnet for higher output with minimal amplifier power
- Terminals: Gold Plated Push & Insert to resist corrosion and aide in easy of installation
Click here for the Quick Start Guide
- UPC:
- 613815844976
