Package Includes:

• (2) Pairs of Rockville MS525B 5.25" 800 Watt Waterproof Marine Boat Speakers 2-Way Black
• (2) Pairs of Rockville MAC525B 5.25" Black Marine Wakeboard Tower Speaker Pod Enclosures
• (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote
• (1) Pair of Rockville 1.75" Rubber Adapter Inserts 4 Polaris RZR Tower Speaker Enclosures
• (1) MB Quart NA2-320.4 320w RMS 4-Channel Amplifier Amp 4 Polaris RZR/ATV/UTV/Cart

---

Video of MS525B:

 

What's In the Box:

• 2 Speakers
• Installation Hardware: (8 Stainless Steel Screws + 8 Stainless Steel  Speed Clips)
• Mounting Template
• Owner's Manual
• Warranty Card

Features of MS525B:

• Pair Rockville MS525B 5.25" 400 Watt Waterproof Marine Boat Speakers 2-Way White
  
• Peak Power: 400 Watts per pair / 200 Watts each
  
• RMS Power: 200 Watts per pair / 100 Watts each
  
• Injection Molded Polypropylene Cone
  
• Aluminum voice coil with ASV winding
  
• Cloth surrounds
  
• Impedance: 4 Ohm
  
• Frequency Response: 110Hz – 20 Khz
  
• Sensitivity:87dB @1w/1m
  
• High quality magnet: 6 Oz Y30 Ferrite magnet
  
• 1” inch ASV voice coil
  
• IP56 waterproof
  
• Fully Marinized Against Salt & Fresh Water Conditions
  
• Completely Waterproof and rustproof at level IP56
  
• Anti-UV molded ABS plastic basket & grill
  
• Pre-installed mounting screws included
  
• Perfect for marine, outdoor, and car use
  
• 1” inch Tweeter: (PEI Diaphragm with NdFeB magnet)
  
• Injection Molded Polypropylene Dust Cap
  
• SPL: 87dB  ±  2dB (at  1M / 1W)
  
• Resonant Frequency (F0) 120Hz + or – 20% at 1V
  
• 3MM plate and 3 MM T-yoke
  
• Total Diameter: 5.79”
  
• Cutout Diameter in Inches for Mounting: 5.31”
  
• Total Height: 2.56”
  
• Mounting Depth in inches:1.85’’
  
• Shipping weight: 2.42 Lbs
  
• Shipping Dimensions:6” x 6” x 5.7” 

T/S Parameters:

• Magnet weight in OZ:6 OZ
  
• Magnet details:F70*F32*10
  
• Fs:142 Hz
  
• Re:3.2 ohms
  
• Qes:2.08
  
• Qts:1.3
  
• Qms:3.467
  
• Vas:1.712L
  
• Cms:195.49UM/N
  
• Bl:2.967
  
• MMS:6.4g
  
• XMAX:1.5 mm
  
• SD:78.54 cm²

---

Includes:

• 2 Wakeboard Cans
  
• All mounting hardware
  
• (2) 2.375” rubber inserts
  
• (2) 2.25” rubber inserts
  
• (2) 2.5” rubber inserts
  
• (2) 2” rubber inserts
  
• (2) 1.875” rubber inserts
  
• (2) 1.75” rubber inserts
  

Video of MAC525B:

Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC525B comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole.  6 precision molded high impact rubber inserts guarantee fitment on towers from 1.75” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.

These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC525B features a black powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading.  They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!

The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.

Features:

• Pair of Rockville MAC525B 5.25” black aluminum can wakeboard tower enclosures
• Made of high quality 6061 aircraft grade aluminum
  
• Beautiful white powder-coat finish
  
• 100% waterproof and fully marinized against salt and fresh water conditions
  
• Internally wired for clean install—no exposed wires or terminals
  
• High efficiency design features the perfect airspace for 5.25" speakers
  
• Rugged universal mounting clamps made of 6061 aluminum
  
• Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
  
• Mounting Depth - 5.5"
• Total Depth - 7.9"
• Cutout - 4.86"
• Diameter - 6.6".
• Mounting diameter - 5.5"
• Height of mount - 3.75"
• Total height of unit - 10"

---

All about your RGHR2:

How To Set Up Your RGHR2:

Included in the box:

• Marine digital media receiver
• Wired remote with 32.8 foot wire
• USB extension cable (40 inches)
• Mounting bracket
• Screws
• ISO wiring
• Owner manual and warranty

Description:

The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.

Crazy loud!
We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.

Included wired remote
Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.

Latest listening features
The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.

Ability to connect multiple external amps
This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplifiy your speakers and a subwoofer amplifier.

Features:

• Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
• Fits into a standard Gauge-Hole (Tachometer) Opening
• Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
• Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
• IP66 Waterproof Certification (Tested to withstand the elements)
• USB Input to play back audio files store on a USB thumb drive or any other USB device
• RCA Aux Input
• AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
• Bluetooth built in to stream audio from any Bluetooth enabled device
• USB Input Charges Your Phone
• Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
• Big easy to use buttons
• Backlit LCD display
• Wired Remote Control Included (normally $50)
• Required cutout: 2.96" (diameter) x 2.75" (depth)
• USB is 500mA and 5V and supports 16GB max
• Dimensions:
• 2.96" cutout mounting diameter
• 4.45" diameter top plate
• 3.9" mounting depth (not including top plate)
• 5.0" depth including the top plate
• Specs of the built in amplifier:
• TDA7851L quadbridge power amplifier
• 4 x 72 watts peak @ 2 ohm
• 4 x 48 watts peak @ 4 ohms
• 4 x 28 watts RMS @ 4 ohms
• Highly efficient even when running at 2 ohms!
• Low distortion even at top volumes

---

Feature of MAC INSERT:

(2) Rockville 1.75" Rubber Adapter Inserts For Polaris RZR Tower Speaker Enclosures

---

Description of NA2-320.4:

MB Quart compact Four Channel, 400 watt Powersports amplifier with on-board equalization and simple installation with quick release connectors.

Features:

• MB Quart NA2-320.4 320w RMS 4-Channel Amplifier 4 Polaris RZR/ATV/UTV/Cart
• Marine Grade Protection
• Pre-Amp Circuitry: The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
• Inputs: 2 Pair, High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
• Four channel operation
• Complete control of amplifier signal, essential when using two or more amplifiers
• Full Range Class D: High efficient circuit topology which helps the amplifier develop a lot of power in a very small heatsink
• Stable power through the PC board with minimal heat generation
• Aluminum Heat Sink: Quickly dissipates heat to allow the amplifier to run lower impedance for longer duration
• Simpatico Coil Design: The dual coil pulse width modulated power supply keeps voltage constant through the Ultra-Fi output devices
• Output Connections: Quickly remove amplifier when you are putting machine up for the winter as a security precaution
• Gold plated power, ground, speaker and RCA corrosion resistant connections
• Diagnostics: Monitor thermal, overload, DC and speaker short protection with lighted indicators on the amplifier end panel
• Water resistant for durability in any environment

Specifications:

• Certifications: Marine and Powersports
• Variable Voltage: 0.2V-0.9V
• Signal to Noise Ratio: >90dB
• Frequency Response: 20Hz - 20kHz
• Bass Boost: 0-12dB at 45Hz
• Power at 2-Ohms: 4 x 80W
• Power at 4-Ohms: 4 x 40W
• Total Channels: 4
• Audio Inputs: RCA
• Dimensions: 3.70" x 5.51" x 1.77" in (9.4 x 14.0 x 4.5 cm)
• Weight 2.16lbs (0.98kg)