- (2) Rockville DPM8W 8" 2-Way 600W White Active/Powered Studio Monitor Speaker
- (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height
- (1) Rockville RMF1 Studio Microphone Isolation Shield with Sound Dampening Foam
- (1) Pair of Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
- (1) Focusrite SCARLETT 2I2 2nd Gen 192KHz USB 2.0 Audio Interface w/ Pro Tools First
Video of DPM8W:
Description:
The Rockville DPM8 Active/Powered Studio Monitor Speaker is a step-up version of our popular APM series. These speakers are sold individually and each speaker is bi-amped which means it has one amp for the highs, and another for the lows. These speakers have 300 watts of peak output power and 150 watts RMS. These sound better than the famous brand studio monitors. They have a flat frequency curve making these the perfect studio monitors. The only reason our price point is not 300 % higher is because you are buying directly from the manufacturer. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.
Description of the Enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.
Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes: painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. Baking paint is long lasting and is the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color and design to make sure it is not only beautiful, but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very clean and modern. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 Digital Sound Processor (DSP) for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know the brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components.
For highs, we use Ferro fluid enhanced 1.5" neodymium silk dome tweeters with metal grill protection. If you are an audiophile, I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without having to worry about melting or blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.
We use a 8” woofer that will out-perform a regular 8” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids — basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies, which in turn allows the speaker to be louder without distorting. We use very high-grade crossover filters in our speakers. The specially wound voice coils produce accurate responses along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space, with the goal of reproducing the sound to play back exactly the way it was recorded!
Added Benefits:
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat, than your speaker can handle more power!
Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound clearer, and at the same time it protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!
Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The Volume, High Pass filter and Low Pass filter controls are all found on the rear of the unit. The DPM8 has all your standard studio inputs and outputs such as a ¼” TRS and XLR balanced input jacks, and RCA input.
Features:
- Rockville DPM8W 8" 2-Way 300W Active/Powered Studio Monitor Speaker in White (sold individually)
- Peak Power: 300 Watt
- RMS Power: 150 Watt
- Bi-Amped: 45 Watts for highs, and 105 watts for the lows
- Enclosure is made of top quality MDF wood. Our enclosure is not particle board; it is true high-grade MDF! The enclosure is 0.5” thick around while the front board of it is a full 1” thick to give you the ultimate best sound quality!
- We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
- Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
- The port is built to the perfect spec to enhance the sound
- Auto-Switching Power Supply
- Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter With Metal Grill Protection
- Tweeter has 1” voice coil diameter
- Curved Front Bezel Design Eliminates Standing Wave Distortion
- Injection Molded Polypropylene Cone Woofer
- Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
- Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
- We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
- Specially Wound Voice Coils Produce Accurate Responses along Entire Frequency Spectrum
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
- Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
- World class top of the line audiophile grade components! We use ADAU 1701 Digital Sound Processor for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are also amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know brands who make circuits, but these are famous in that industry and are known to be the best of the best. Only very high end products use these components
- 110 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltage more efficiently and adheres to all international efficiency standards!
- Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
- We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
- Transducer Production Line to Make the SPL Performance Stable
Inputs / Outputs / Controls:
- Volume control
- Independent High (–2dB – +1dB) and Low (–2dB – +2dB) frequency level controls
- One each ¼” TRS (TS capable) and XLR balanced input jacks
- RCA input
Details:
- Certification: CE and RoHS Compliant
- Amplifier: Class D, very efficient amplifier with top components! (ADI--ADAU1701 DSP, TI--TPA3116, SMPS)
- System Impedance: Tweeter 6 Ω ; Woofer 4 Ω
- Signal to noise ratio: 80dB (Maximum output with THD+1<1%, A-weight)
- Max SPL: 106dB @ 1w/1m
- THD: 0.10%
- Frequency Response: 30Hz - 20kHz
- 300 Watts peak output
- 150 Watt RMS output
- Input voltage: 120V
- Components: 1.5" neodymium silk dome tweeter and 8" woofer with rubber surrounds and polypropylene cone
- Product Dimensions in Inches (Single): (W*H*D) 9.92” x 15.35'' x 12.20''
- Shipping Dimensions in Inches (For pair boxed): (W*H*D) 15.94'' x 19.52'' x 13.94''
- Net Weight: 22.06 LBS
- Shipping Weight: 26.47 LBS
- Includes signal cable and power cord
- Input Impedance (Ohms): 10 K Ohm Balanced
- System Volume: (-30dB to +6dB)
Includes:
- Pro-m50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼” adapter
Video of PRO-M50:
Rockville
brings you studio quality headphones and at an incredible price with
its new PRO-M50 headphones. These are professional grade headphones that
are guaranteed to ourperform headphones that cost triple the price!
These feature ergonomically designed swiveling cups with interchangeable
soft suede or leather finish cushions (included). The ear cups seal
tight for excellent sound isolation and minimal bleed. Inside these cups
you’ll find 40mm Neodymium drivers delivering accurate audio with an
extended frequency range for clear and rich bass, and a full frequency
range of mids and highs. These are closed back style headphones
specifically designed for studio monitoring. These play back the sound
with a flat frequency curve so you can hear your music exactly how it
was recorded. With the PRO-M50 you can expect to hear every detail of
every song with extreme accuracy. These headphones cover full frequency
ranges; even extending a bit past the frequencies that the human ear can
hear.
The headband is made of soft leather, offering ultimate comfort even
after extended wear. The beautifully designed stainless steel headband
frame and arms are strong and durable. A detachable 51” coiled 100%
Oxygen Free Copper cable with a gold plated 3.5mm plug is included along
with a gold plated ¼”
adapter to ensure the best possible signal. A hard leather case is
included to store and protect your new investment when you are on the
go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼” adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz – 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight:290g (with cable)
Video of RCM03:
Unboxing Video of RCM03:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03
Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100%
Copper 10 foot XLR to XLR cable to connect to any mixer with phantom
power
- Metal
shock mount
- Metal
Anti-wind foam cap
- Owners
Manual
- Warranty
card
Features:
- Rockville RCM03 Pro Studio
Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized
Condenser Cardioid Design
- Large diaphragm for smooth, natural
sound and low noise
- Power Requirements: 48V DC phantom
power or computer sound card (can connect to the phantom power channel
of your mixer or can connect to your laptop or computer)
- Uni-directional
- Sensitivity: -27dB±2dB(0dB=1V/Pa
at1kHZ)
- Output impedance: 200Ω±30%(at 1kHz)
- Standard operating voltage: 3V
- Operating voltage range: 1.5V-10V
- Current consumption: less than
500uA
- Voltage deduction characteristic:
within 3dB at 2V
- S/N ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter cutoff
frequency: 40Hz---16 KHz
- Load impedance: Greater or = to
1000 Ohms
- Equivalent Noise level: Less than
18dB A (IEC581-5)
- Max. Input SPL: 126dB(THD≤1.0% at
1kHZ)
- Electrical current: Greater than
4.8Ma
- Microphone body net weight:320
Grams (0.7 Pounds)
- Microphone Max.diameter 44mm (1.73”
inches)
- Microphone Length 217mm (8.54”
inches)
- Microphone material: steel grille +
Alluminum (handheld part)
- PCB Layout: Surface mount
Video of RVSM1:
Includes:
- (2) Near-Field Monitor Stands
Features:
- Studio Monitor Stands (Pair)
- Adjustable Height
- Steel Construction
- Nylon clutch for adjusting
- EVA Pad on top to eliminate unwanted vibrations
- Triple enforced steel base with ultimate sturdiness
- Black Color
- Weight capacity: 80 lbs.
- Adjustable height Range: 33-45 inches
- Base: 17.7 x 17.7 x 17.7 inches
- Top Plate: 9.05 x 9.45 inches
- Tube Diameter: 1.5 inch- 1.37 inch
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.Great features and great quality make Rockville a great choice.
Video of RMF1:
Unboxing Video of RMF1:
What's Included:
- 3 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter
- Desktop mic attachment
Rockville’s RMF1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 1.5-inch-thick high density acoustic foam, the RMF1 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the RMF1 your go-to sound dampening isolation shield.
Features:
- RMF1 Pro Audio Acoustic Microphone Isolation Shield with Sound Dampening Foam
- Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- Features 1.5-Inch-Thick High Density Pyramid Acoustic Foam
- Front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8 Die-Cast Metal Threads
- Mic Stand with 5/8 Adapter
- The shield is made of pure high-grade steel
- Number of Panels : 3 pcs
- Dimensions Each Panel : 8.2'' x 4.5''
- Dimensions Assembled Unit : 11'' x 4.3” x 16.3”
Video of RRS190S:
Description:
The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.
Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your
studio monitors. They were designed to work in studios and give studio
quality sound; however some customers will also use them for high end
home theater setups. Typically when speakers are placed on hard
surfaces, they can vibrate. The vibrations cause the speakers’ sound to
become inaccurate, unfocused and lose their “musical transparency." The
Rockville Isolation Pad package includes a pair of high-density acoustic
foam pads with multiple angle inserts that allow you to fine-tune your
speakers positioning. Though conceived and designed for studio
monitors/speakers you can decouple and isolate any sensitive studio
device such as DVD players, turntables and laptops.
How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement
you make to your sound system. Imagine the isolation pads as being your
speaker systems “shock absorbers”. Place the Rockville Isolation Pads
under your monitors they will absorb vibrations and decouple your
monitor to stop vibrations that would otherwise transfer into your
studio environment. Isolation Pads will make a day and night difference
in the sound quality of your studio. You spent good money on your studio
monitors, now go the extra mile to make them sound their best.
Rockville Studio Isolation Pads Feature:
- Easiest and affordable way to improve your studio monitors sound
- Decouples your studio monitors from desktops and monitor stands for accurate reproduction
- Each package contains 2 Isolation Pads - enough for 2 studio monitors
- 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
- Supports up to 100 lbs., so they can isolate a variety of studio gear
- Handsome charcoal gray color
Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your
monitors sit on your desk or floor, they transmit vibrations that cause
the surface that they're sitting on to vibrate at low bass frequencies.
These bass vibrations don’t get recorded in to your mix because they are
not really in your mix. But when you play the mix in your studio the
“coupled” vibrations, will be heard giving you false sound reproduction.
But because these “coupled” vibrations are not being recorded when you
play your mix outside of your studio, all those low bass frequencies
will be gone. By “decoupling: your monitors, you eliminate these false
low frequency vibrations, helping you to create accurate mixes that will
sound great on any playback system.
Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at
the exact angle you need. Each pad comes in two pieces, each with a 4
degree angle. That allows you to tilt your monitor at one of five
different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you
to place your monitors flat on your desk top or angled down for proper
positioning.
The most affordable way to improve the sound of your studio monitors
Features:
- Rockville RRS190S: Monitor Isolation Pads
- 3 Angle High Density Foam
- 7.5" x 9.5"
- High quality, High Density Foam
- Eliminates vibrations and unwanted noises in your studio
- Price is for (2) pads which accommodates (2) speakers
Plug-in Collective Offer:
Free bi-monthly plug-ins from Focusrite’s Plug-In Collective.
Authorized Focusrite Dealer!
Included Software:
Over a $200 Value- FREE!
Compose, record, edit, save and export your music straight away, with time-unlimited versions of industry-standard music software. All the software is simple enough for beginners, yet sophisticated enough for advanced users.
- Ableton Live Lite
- Pro Tools | First - Focusrite Creative Pack: Features 12 additional plug-ins
- Softube's Time and Tone bundle
- Focusrite Red Plug-In Suite
- Novation's Bass Station Virtual synthesiser
- 2GB of Loopmasters samples
- XLN Addictive Keys
- Bi-Monthly Plug-In Collective Offers
- Focusrite Control
- Focusrite iOS Control
Check out this video for more information on the included software:
Description:
Focusrite interfaces are the perfect partner for Pro Tools, so Scarlett 2i2 comes with Pro Tools | First recording software in the box, as well as Ableton Live Lite and a suite of software and samples so you can start recording straight away. As you’d expect, it works flawlessly with all major DAWs on Mac and PC.
New Generation – Better In Every Way
The latest generation Scarlett 2i2 is packed full of upgrades. It
operates at sample rates all the way up to 192kHz with new super-low
latency that lets you record and monitor with software effects in real
time.
We completely redesigned the instrument inputs so they can handle even
the hottest guitar pick-ups, and we’ve made it easier than ever to set
your levels accurately. We’ve also built in new analogue protection
circuitry across the inputs and the outputs, to guard your interface
against unwanted power surges.
Perfect for recording two mics at once
This is our compact yet versatile 2-in, 2-out USB audio interface. It
gives singer songwriters two natural-sounding Scarlett mic preamps and
the same class-leading sound quality and digital conversion as the rest
of the latest Scarlett range. Take it anywhere, connect by USB, plug
your mics and guitars straight in, and simply start recording.
Sound Like You
Easily make studio quality recordings that sound just the way you
intended. Connect your microphones, guitars and line level equipment to
two newly designed instrument inputs, both with natural-sounding
Scarlett preamps and 48V phantom power.
Effects In Real Time
Don’t let latency hold you back. Enhance your recordings in ways that
are simply impossible with any other interface in this class, like
enabling real-time guitar amp simulation and vocal reverb (depending on
your software, settings and computer).
Start Recording Today
Compose, record, edit, save and export your music straight away, with
time-unlimited versions of industry-standard music software: Ableton
Live Lite and Pro Tools | First - Focusrite Creative Pack, which
features 12 additional plug-ins including the Eleven Lite for real life
guitar amp emulations and Black Op for iconic distortions and
overdrives.
You also get Softube's Time and Tone bundle, the Focusrite Red Plug-In
Suite, Novation's Bass Station virtual synthesiser and 2GB of
Loopmasters samples.
Scarlett 2i2 works flawlessly with all major DAWs on Mac and PC, and all
the software included is simple enough for beginners, yet sophisticated
enough for advanced users.
Record Absolutely Anywhere
Never miss another moment of inspiration. Lay down some ideas at a
friend’s house, or record your next open mic night. Scarlett 2i2 is
compact, lightweight and sturdy enough to take with you anywhere. You
don’t need a power supply, either – just connect with a USB cable and
start recording.
Designed for Guitarists
No matter how loud you play, or how hot your pick-ups, the
newly-designed instrument inputs can handle it. You'll be free to play
without the worry of unwanted distortion.
Crisp and Clear Conversion
Converting your performance into digital audio and back again is the
most important part of the recording process. We’ve been making
class-leading converters for over 20 years, and Scarlett 2i2 has the
best converters of any interface in its class.
You can hear the difference! Every part of your recording will be
beautifully crisp and clear, even when you’re playing softly. This means
you can amplify your quieter moments without any unwanted hiss or
buzzing.
Find the Perfect Level
Setting the perfect level couldn’t be easier, thanks our unique haloes
around the gain knobs. They glow a reassuring shade of green when you’re
recording at the perfect volume. If they turn red, it’s time to back
off.
Scarlett 2nd Generation audio interfaces come with the Pro Tools | First Focusrite Creative Pack. This includes Pro Tools | First + 12 plug-ins: Tape Echo, Eleven Lite, Black Op Distortion, Gray Compressor, Graphic EQ, Flanger, Vibe Phaser, Roto Speaker, Sci-Fi Ring Modulator, Vari-Fi Speed Shifter, Studio Reverb, and In Tune Digital Tuner. All this is in addition to Scarlett's already amazing software bundle which includes Ableton Live Lite. You simply need to register your new Scarlett 2nd Gen unit to download all this amazing content.
Included:
- Ableton Live Lite is included as a free download.
- 2GB Loopmasters Samples are included as a free download.
- Free bi-monthly offers from our Plug-In Collective
- Free XLN Addictive Keys license with purchase
Features:
- Focusrite SCARLETT 2I2 2nd Gen 192KHz USB 2.0 Audio Interface w/ Pro Tools First
- Supported Operating Systems: Mac OSX 10.10 Yosemite or 10.11 El Capitan; Windows 7 (64-bit), Windows 8.1, Windows 10
- Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
- Microphone Inputs:
- Frequency Response: 20 Hz - 20 kHz ± 0.1dB
- Dynamic Range: 106 dB (A-Weighted)
- THD+N: <0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Noise EIN: < -128 dB (A-Weighted)
- Maximum input level: +4 dBu
- Gain Range: 50 dB
- Line Inputs:
- Frequency Response: 20 Hz - 20 kHz ± 0.1dB
- Dynamic Range: 106 dB (A-Weighted)
- THD+N: <0.003% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Maximum input level: +22 dBu
- Gain Range: 50 dB
- Instrument Inputs:
- Frequency Response: 20 Hz - 20 kHz ± 0.1dB
- Dynamic Range: 106 dB (A-Weighted)
- THD+N: <0.02% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Maximum input level: +13 dBu
- Gain Range: 50 dB
- Line Outputs:
- Dynamic Range Outputs: 106 dB (A-Weighted)
- Maximum Output Level (0 dBFS) Balanced Line/TRS Outputs: +10 dBu
- THD+N Outputs: <0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Headphone Outputs:
- Dynamic Range: 107 dB (A-Weighted)
- THD+N: <0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Maximum Output Level: > +10dBu
- UPC:
- 613815830122
