Package Includes:

• (2) Rockville DPM8C 8" 2-Way 600W Wood Active/Powered Studio Monitor Speakers
• (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (1) Pair of Rockville RHTSB 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
• (1) Rockville RMF1 Studio Microphone Isolation Shield with Sound Dampening Foam
• (1) Pair of Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
• (1) Focusrite SCARLETT 2I2 2nd Gen 192KHz USB 2.0 Audio Interface w/ Pro Tools First

---

Video of DPM8C:

The Rockville DPM8 Active/Powered Studio Monitor Speaker is a step-up version of our popular APM series. These speakers are sold individually and each speaker is bi-amped which means it has one amp for the highs, and another for the lows. These speakers have 300 watts of peak output power and 150 watts RMS. These sound better than the famous brand studio monitors. They have a flat frequency curve making these the perfect studio monitors.  The only reason our price point is not 300 % higher is because you are buying directly from the manufacturer. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.

Description of the Enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.

Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes: painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. Baking paint is long lasting and is the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color and design to make sure it is not only beautiful, but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very clean and modern. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.

Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 Digital Sound Processor (DSP) for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know the brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components.

For highs, we use Ferro fluid enhanced 1.5" neodymium silk dome tweeters with metal grill protection. If you are an audiophile, I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without having to worry about melting or blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.

We use a 8” woofer that will out-perform a regular 8” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids — basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies, which in turn allows the speaker to be louder without distorting. We use very high-grade crossover filters in our speakers. The specially wound voice coils produce accurate responses along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space, with the goal of reproducing the sound to play back exactly the way it was recorded!

Added Benefits:
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat, than your speaker can handle more power!

Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound clearer, and at the same time it protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!

Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The Volume, High Pass filter and Low Pass filter controls are all found on the rear of the unit. The DPM6 has all your standard studio inputs and outputs such as a ¼” TRS and XLR balanced input jacks, and RCA input.

Features:

• Rockville DPM8C 8" 2-Way 300W Active/Powered Studio Monitor Speaker with Classic Wood Finish (sold individually)
  
• Peak Power: 300 Watt
  
• RMS Power: 150 Watt
  
• Bi-Amped: 45 Watts for highs, and 105 watts for the lows
  
• Enclosure is made of top quality MDF wood. Our enclosure is not particle board; it is true high-grade MDF! The enclosure is 0.5” thick around while the front board of it is a full 1” thick to give you the ultimate best sound quality!
  
• We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
  
• Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
  
• The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
  
• The port is built to the perfect spec to enhance the sound
  
• Auto-Switching Power Supply
  
• Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter With Metal Grill Protection
  
• Tweeter has 1” voice coil diameter
  
• Curved Front Bezel Design Eliminates Standing Wave Distortion
  
• Injection Molded Polypropylene Cone Woofer
  
• Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
  
• Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
  
• We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
  
• Specially Wound Voice Coils Produce Accurate Responses along Entire Frequency Spectrum
  
• Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
  
• Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
  
• Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
  
• World class top of the line audiophile grade components! We use ADAU 1701 Digital Sound Processor for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are also amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know brands who make circuits, but these are famous in that industry and are known to be the best of the best. Only very high end products use these components
  
• 110 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltage more efficiently and adheres to all international efficiency standards!
  
• Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
  
• We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
  
• Transducer Production Line to Make the SPL Performance Stable

Inputs / Outputs / Controls:

• Volume control
  
• Independent High (–2dB – +1dB) and Low (–2dB – +2dB) frequency level controls
  
• One each ¼” TRS (TS capable) and XLR balanced input jacks
  
• RCA  input
  

Details:

• Certification: CE and RoHS Compliant
  
• Amplifier: Class D, very efficient amplifier with top components! (ADI--ADAU1701 DSP, TI--TPA3116, SMPS)
  
• System Impedance: Tweeter 6 Ω ; Woofer 4 Ω
  
• Signal to noise ratio: 80dB (Maximum output with THD+1<1%, A-weight)
  
• Max SPL: 106dB @ 1w/1m
  
• THD: 0.10%
  
• Frequency Response: 30Hz - 20kHz
  
• 300 Watts peak output
  
• 150 Watt RMS output
  
• Input voltage: 120V
  
• Components: 1.5" neodymium silk dome tweeter and 8" woofer with rubber surrounds and polypropylene cone
  
• Product Dimensions in Inches (Single): (W*H*D) 9.92” x 15.35'' x 12.20''
  
• Shipping Dimensions in Inches (For pair boxed): (W*H*D) 15.94'' x 19.52'' x 13.94''
  
• Net Weight: 22.06 LBS
  
• Shipping Weight: 26.47 LBS
  
• Includes signal cable and power cord
  
• Input Impedance (Ohms): 10 K Ohm Balanced
  
• System Volume: (-30dB to +6dB)

---

Includes:

• Pro-m50 headphones
  
• Detachable cable
  
• Soft suede and  leather ear cushions (interchangeable)
  
• Leather hard travel protective case
  
• Gold plated ¼” adapter

---

Video of PRO-M50:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear. 

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!  

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad 
• Professional High-Definition Studio Headphones
  
• 40mm Neodymium drivers
  
• Ergonomically designed swivel ear cups
  
• Supreme sound isolation
  
• Accurate sound reproduction
  
• Minimal bleed
  
• Sturdy and durable steel headband and arms
  
• Soft leather headband cover
  
• Interchangeable leather and soft suede ear cups covers included
  
• Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
  
• Gold plated 3.5mm connector
  
• Gold plated ¼” adapter
  
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting
  

Specifications:

• Style: Closed-Back
  
• Design: Circumaural
  
• Transducer Type: Dynamic
  
• Driver: 40MM 
  
• Sensitivity: 97±3dB
  
• Impedance: 32ohm
  
• Frequency Response:10Hz – 25KHz
  
• Max. Power: 600MW
  
• Rating Power: 260MW
  
• Net Weight:290g (with cable)

---

Video of RCM03:

Unboxing Video of RCM03:

The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!

Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.

The aluminum construction makes the RCM03 tough enough for Live sound applications as well!

Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.


What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
  
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
  
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  
• Metal shock mount
  
• Metal Anti-wind foam cap
  
• Owners Manual
  
• Warranty card
  

Features:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
  
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
  
• Large diaphragm for smooth, natural sound and low noise
  
• Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer)
  
• Uni-directional
  
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  
• Output impedance: 200Ω±30%(at 1kHz)
  
• Standard operating voltage: 3V
  
• Operating voltage range: 1.5V-10V
  
• Current consumption: less than 500uA
  
• Voltage deduction characteristic: within 3dB at 2V
  
• S/N ratio: More than 24dB
  
• Frequency Response: 30Hz - 20 KHz
  
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
  
• Load impedance: Greater or = to 1000 Ohms
  
• Equivalent Noise level: Less than 18dB A (IEC581-5)
  
• Max. Input SPL: 126dB(THD≤1.0% at 1kHZ)
  
• Electrical current: Greater than 4.8Ma
  
• Microphone body net weight:320 Grams (0.7 Pounds)
  
• Microphone Max.diameter 44mm (1.73” inches)
  
• Microphone Length 217mm (8.54” inches)
  
• Microphone material: steel grille + Alluminum (handheld part)
  
• PCB Layout: Surface mount

Owner’s Manual

---

Video of RHTSB:

The Rockville RHTSB high performance wood speaker stands are designed with appearance, performance, and quality in mind. These stands are perfect for Bookshelf speakers, surround sound speakers and even studio monitors!

Our stands are finished with premium furniture-grade paint that will not crack, chip, or peel. They will look great in your living room, family room, den, or even studio. These stands are constructed from high quality medium density fiber core to minimize resonance. Unlike our competitors who use particle board we use a higher quality wood in the construction of our stands.

With the included brass and rubber spikes as well as the included EVA speaker isolation pads you can feel confident that your speakers will be sturdy and perform optimally no matter what floor surface they are on.

In addition to appearance and quality we also made sure to focus on performance. The height of these stands are 36”. The reason we chose this specific height is that after testing stands at other heights we noticed this height was optimal for listening. In addition to performance we also would like to note that at 36” these stands look gorgeous! The included isolation pads not only provide a no-slip surface but help your speakers achieve superior acoustic quality.

Another really cool feature I would like to mention is the empty body design. By adding sand to the body of the stand you can increase the weight if you so choose. The load capacity of these stands are 60 lbs. Most other stands on the market have a maximum load capacity of 20 lbs. which really is not enough for a lot of speakers on the market. These stands are sturdy, built well, look great, and out-perform the competition so buy with confidence!

Includes:

• 8 Isolation pads
  
• 8 Brass spikes
  
• 8 Rubber spikes
  
• 4 Cable clips
  
• 4 Cable ties
  
• 16 Screws
  

Features:

• (2) Rockville RHTSB 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
• Pair Rockville RHTSB high performance wood speaker stands
  
• Finished with premium furniture-grade paint that will not crack, chip, or peel.
  
• Made from high quality medium density fiber core to minimize resonance
  
• Brass & Rubber spikes add stability to any floor surface
  
• Isolation pads create a no-slip surface as well as improve acoustical performance
  
• Empty body design allows you to add sand in order to increase the weight of the stands if needed
  
• 60 lbs. load capacity allows you to use a heavier speaker without compromising stability.
  

Owner’s Manual

Specifications:

• Stands Height: 36"
  
• Base plate size: 11.8" 9.25"
  
• Top Platform size 1: 9.25" 7.28" (For smaller size speakers)
• Top Platform size 2: 9.25" 11.8" (For larger size speakers up to 8")
  
• Item Load weight capacity: 60 lbs.
  
• Item weight per pair 25 lbs.
  
• Shipping weight 29 lbs.
  
• Color: Black
  
• Shipping dimensions 36” x 11.4” x 9.25”
  
• Product dimension 11.8” x 9.25” x 36”

---

Video of RMF1:

Unboxing Video of RMF1:

What's Included:

• 3 Panel Mic Isolation Shield
• Hardware to Mount unit to your mic stand
• 5/8” Mic Adapter
• Desktop mic attachment

Rockville’s RMF1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 1.5-inch-thick high density acoustic foam, the RMF1 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the RMF1 your go-to sound dampening isolation shield.

Features:

• RMF1 Pro Audio Acoustic Microphone Isolation Shield with Sound Dampening Foam
• Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
• Isolates Directional Microphones from Off Axis Coloration
• Limits External Bleed from Unintended Sound Sources
• Features 1.5-Inch-Thick High Density Pyramid Acoustic Foam 
• Front and a vented metal back plate for the Best Noise Reflection Reduction
• Can be used in fixed location
• Stand mountable
• Provides Vocal Booth Style Recordings with Minimal Footprint
• Professional Studio-Grade
• Rugged Finish Makes This Easy to Transport
• Tri-Pod Foot Design for Stability on Flat Surfaces
• 3/8 Die-Cast Metal Threads 
• Mic Stand with 5/8 Adapter
• The shield is made of pure high-grade steel
• Number of Panels : 3 pcs
• Dimensions Each Panel : 8.2'' x 4.5'' 
• Dimensions Assembled Unit : 11'' x 4.3” x 16.3” 

Owner’s Manual

---

Video of RRS190S:

Description:

The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music.  These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”.  Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

• Easiest and affordable way to improve your studio monitors sound
• Decouples your studio monitors from desktops and monitor stands for accurate reproduction
• Each package contains 2 Isolation Pads - enough for 2 studio monitors
• 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
• Supports up to 100 lbs., so they can isolate a variety of studio gear
• Handsome charcoal gray color

Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors

Features:

• Rockville RRS190S: Monitor Isolation Pads
• 3 Angle High Density Foam
• 7.5" x 9.5"
• High quality, High Density Foam
• Eliminates vibrations and unwanted noises in your studio
  
• Price is for (2) pads which accommodates (2) speakers

---

Plug-in Collective Offer: 

Free bi-monthly plug-ins from Focusrite’s Plug-In Collective.

Authorized Focusrite Dealer!

Video of SCARLETT-2I2-2ND-GEN:

 

Included Software:

Over a $200 Value- FREE!
Compose, record, edit, save and export your music straight away, with time-unlimited versions of industry-standard music software. All the software is simple enough for beginners, yet sophisticated enough for advanced users.

• Ableton Live Lite
• Pro Tools | First - Focusrite Creative Pack: Features 12 additional plug-ins
• Softube's Time and Tone bundle
• Focusrite Red Plug-In Suite
• Novation's Bass Station Virtual synthesiser
• 2GB of Loopmasters samples
• XLN Addictive Keys
• Bi-Monthly Plug-In Collective Offers
• Focusrite Control
• Focusrite iOS Control

Check out this video for more information on the included software:

Description:

Focusrite interfaces are the perfect partner for Pro Tools, so Scarlett 2i2 comes with Pro Tools | First recording software in the box, as well as Ableton Live Lite and a suite of software and samples so you can start recording straight away. As you’d expect, it works flawlessly with all major DAWs on Mac and PC.

New Generation – Better In Every Way
The latest generation Scarlett 2i2 is packed full of upgrades. It operates at sample rates all the way up to 192kHz with new super-low latency that lets you record and monitor with software effects in real time.

We completely redesigned the instrument inputs so they can handle even the hottest guitar pick-ups, and we’ve made it easier than ever to set your levels accurately. We’ve also built in new analogue protection circuitry across the inputs and the outputs, to guard your interface against unwanted power surges.

Perfect for recording two mics at once
This is our compact yet versatile 2-in, 2-out USB audio interface. It gives singer songwriters two natural-sounding Scarlett mic preamps and the same class-leading sound quality and digital conversion as the rest of the latest Scarlett range. Take it anywhere, connect by USB, plug your mics and guitars straight in, and simply start recording.

Sound Like You
Easily make studio quality recordings that sound just the way you intended. Connect your microphones, guitars and line level equipment to two newly designed instrument inputs, both with natural-sounding Scarlett preamps and 48V phantom power.

Effects In Real Time
Don’t let latency hold you back. Enhance your recordings in ways that are simply impossible with any other interface in this class, like enabling real-time guitar amp simulation and vocal reverb (depending on your software, settings and computer).

Start Recording Today
Compose, record, edit, save and export your music straight away, with time-unlimited versions of industry-standard music software: Ableton Live Lite and Pro Tools | First - Focusrite Creative Pack, which features 12 additional plug-ins including the Eleven Lite for real life guitar amp emulations and Black Op for iconic distortions and overdrives.

You also get Softube's Time and Tone bundle, the Focusrite Red Plug-In Suite, Novation's Bass Station virtual synthesiser and 2GB of Loopmasters samples.

Scarlett 2i2 works flawlessly with all major DAWs on Mac and PC, and all the software included is simple enough for beginners, yet sophisticated enough for advanced users.

Record Absolutely Anywhere
Never miss another moment of inspiration. Lay down some ideas at a friend’s house, or record your next open mic night. Scarlett 2i2 is compact, lightweight and sturdy enough to take with you anywhere. You don’t need a power supply, either – just connect with a USB cable and start recording.

Designed for Guitarists
No matter how loud you play, or how hot your pick-ups, the newly-designed instrument inputs can handle it. You'll be free to play without the worry of unwanted distortion.

Crisp and Clear Conversion
Converting your performance into digital audio and back again is the most important part of the recording process. We’ve been making class-leading converters for over 20 years, and Scarlett 2i2 has the best converters of any interface in its class.

You can hear the difference! Every part of your recording will be beautifully crisp and clear, even when you’re playing softly. This means you can amplify your quieter moments without any unwanted hiss or buzzing.

Find the Perfect Level
Setting the perfect level couldn’t be easier, thanks our unique haloes around the gain knobs. They glow a reassuring shade of green when you’re recording at the perfect volume. If they turn red, it’s time to back off.

Scarlett 2nd Generation audio interfaces come with the Pro Tools | First Focusrite Creative Pack. This includes Pro Tools | First + 12 plug-ins: Tape Echo, Eleven Lite, Black Op Distortion, Gray Compressor, Graphic EQ, Flanger, Vibe Phaser, Roto Speaker, Sci-Fi Ring Modulator, Vari-Fi Speed Shifter, Studio Reverb, and In Tune Digital Tuner. All this is in addition to Scarlett's already amazing software bundle which includes Ableton Live Lite. You simply need to register your new Scarlett 2nd Gen unit to download all this amazing content.

Included:

• Ableton Live Lite is included as a free download.
  
• 2GB Loopmasters Samples are included as a free download.
  
• Free bi-monthly offers from our Plug-In Collective
  
• Free XLN Addictive Keys license with purchase
  

Features:

• Focusrite SCARLETT 2I2 2nd Gen 192KHz USB 2.0 Audio Interface w/ Pro Tools First
• Supported Operating Systems: Mac OSX 10.10 Yosemite or 10.11 El Capitan; Windows 7 (64-bit), Windows 8.1, Windows 10
• Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
• Microphone Inputs:
• Frequency Response: 20 Hz - 20 kHz ± 0.1dB
• Dynamic Range: 106 dB (A-Weighted)
• THD+N: <0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
• Noise EIN: < -128 dB (A-Weighted)
• Maximum input level: +4 dBu
• Gain Range: 50 dB
• Line Inputs:
• Frequency Response: 20 Hz - 20 kHz ± 0.1dB
• Dynamic Range: 106 dB (A-Weighted)
• THD+N: <0.003% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
• Maximum input level: +22 dBu
• Gain Range: 50 dB
• Instrument Inputs:
• Frequency Response: 20 Hz - 20 kHz ± 0.1dB
• Dynamic Range: 106 dB (A-Weighted)
• THD+N: <0.02% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
• Maximum input level: +13 dBu
• Gain Range: 50 dB
• Line Outputs:
  
• Dynamic Range Outputs: 106 dB (A-Weighted)
• Maximum Output Level (0 dBFS) Balanced Line/TRS Outputs: +10 dBu
• THD+N Outputs: <0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
• Headphone Outputs:
• Dynamic Range: 107 dB (A-Weighted)
• THD+N: <0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
• Maximum Output Level: > +10dBu