- (2) Kicker 12" Car Subwoofer Subs
- (1) Rockville Dual 12” 1.25 cu.ft. 3/4” MDF Sealed Subwoofer Enclosure Sub Box
- (1) Hifonics Brutus BRX2016.1D 2000 Watt RMS Class D Mono Amplifier Car Amp
- (1) Rockville RWK01 0 Gauge Complete Wire Kit w/ RCA's
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Authorized Kicker Dealer!
Description for Kicker Subs:
A cast aluminum with motor-cooling perimeter venting and spring-loaded terminals that can accept up to 10-gauge wire, so when you run hundreds of watts to this sub, it gives you loud, distortion-free bass. The CompVX 12-Inch Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power.
Features:
- Kicker 44CVX124 Comp VX CVX 12" 1500 Watt Car Subwoofer Sub CVX12-4 44CVX12-4
- Dual Four-Ohm Voice Coils
- Thick Polypropylene Cone
- Signature Double Blue Surround Stitching
- Ribbed Santoprene Surround
- SoloKon Cone Reinforcement
- Oversized Suspension System
- High-Strength Insulated Tinsel Leads
- High Temp Voice Coil
- Perimeter Venting for Thermal Management
- Massive Ceramic Magnet
- UniPlate Extended Pole Piece & Backplate For Superior Heat Dissipation
- Cast Aluminum Basket
- Satin Nickel Spring-Loaded Speaker Terminals
Specifications:
- Size: 12" (30 cm)
- Impedance: 4 Ohms DVC
- Max Rec Amplifier Power: 1500 Watts Peak, 750 Watts RMS
- Sensitivity: 87.1 dB 1w/1m
- Frequency Response: 20 Hz - 500 Hz
- Mounting Depth: 6-11/16" (16.9 cm)
- Mounting Cutout: 11-1/16" (28 cm)
- Min Sealed Box Vol: 1.0 cu. ft (28.3 L)
- Max Sealed Box Vol: 4.6 cu. ft (130 L)
- Min Vented Box Vol: 1.75 cu. ft (49.6 L)
- Max Vented Box Vol: 2.25cu. ft (63.7 L)
- What's in the box: one 12-inch subwoofer, one owner's manual, two stickers
Features of BRX2016.1D:
- Hifonics Brutus BRX2016.1D 2000 Watt RMS Class D Mono Block Car Amplifier+Bass Remote
- Power Output: 2000 Watts x 1 Channel @ 1 ohms
- Power Output: 1400 Watts x 1 Channel @ 2 ohms
- Power Output: 700 Watts x 1 Channel @ 4 ohms
- Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
- LED power (green) and protect (red) indicators
- Built-in system diagnostics
- Preamp RCA outputs to daisy chain multiple amps
- Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
- Lighted connectors and blue wash of light from the underside of the heatsink
- DC, Short Circuit, Thermal and Overload Protection
- Frequency Response: 10Hz-50KHz
- Signal to Noise Ratio: >95dB
- Bass Boost 0-10dB
- RCA Input
- Fuse: External (200A Recommended
- Bass Remote included
- THD: <0.10%
- Variable subsonic filter (15-35 Hz)
- Variable low-pass filter (35-250 Hz)
- Dimensions: 14.7"L x 2.4"W x 9.8"H
Video of RWK01:
Description:
The Rockville RWK01 0 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
Features:
- Rockville RWK01 0 AWG (American Wire Gauge) Complete Car Amp Installation Wire Kit
- 17’ – 0 Gauge Translucent Blue SuperFlex Power Cable
- 3’ – 0 Gauge Translucent Black SuperFlex Ground Cable
- Gold Plated ANL Heat Resistance Fuse Holder
- 200 Amp ANL Gold Plated Fuse
- 1 – 17’ High Grade Twisted Pair of RCA Interconnects
- 25’ Translucent Blue Speaker Wire
- 7’ Split Loom Tubing
- 17’ Amplifier Remote Turn On Cable
- Wire Ties and Ring Terminals, and all other accessories you need for a clean installation
- Soft abrasion proof insulating jacket allows for 100% improved flexibility
- PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
Description for Rockville Enclosure:
The RD12 dual sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RD12 Dual 12" Sealed Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Enclosure Measurements:
- Type of Enclosure: Sealed
- Enclosure Sub Size: Dual 12"
- Dimensions in Inches: 14” x 11.5” x 33.75”
- Top and Bottom Depth: 14"
- Mounting Depth: up to 12" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.55 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.25 Cubic Feet
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815912446
