Package Includes:

• (2) (2) Kicker 42PSC652 PSC65 6.5" 240w Polaris/Motorcycle/ATV/UTV/RZR Speakers
• (1) MB QUART Nautic GMR-1 Marine ATV Boat Stereo Digital Receiver Radio w/ Bluetooth
• (1) Rockville RXM-F3 1600 Watt Marine/Boat 4 Channel Amplifier Amp+PA Microphone
• (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier/Amp Installation Wire Kit

Authorized Kicker Dealer!

The PS 6-1/2-Inch 2Ω Powersports Coaxial Speaker is built to sound great even through a helmet. Thanks to a weatherproof design featuring titanium tweeters and neodymium magnets, these speakers deliver clean, crisp sound. Tough construction that stands up to the elements is combined with high-grade sound quality without making modifications to the fearing or adding extra weight. These PS speakers work best with 60 watts of recommended power.

Features:

• Pair Kicker 40PSC652 PSC65 6.5" 240w Motorcycle/ATV/Marine Speakers
• Woofer: 6-1/2 in. ; 160mm
  
• Tweeters: 3/4 in. ; 20mm
  
• Impedance: 2 Ohms
  
• Power Handling Per Speaker:
  .....120 Watts Peak
  .....60 Watts RMS
  
• Recommended power range: 10 - 60 watts RMS per channel
• Fit Harley-Davidson and Victory motorcycles
• 3/4" Neo-titanium bridge-mounted Dome tweeters
• Neodymium Magnet
• Sensitivity: 92.5 (dB 1w/1m)
  
• Frequency Response: 40 Hz - 20 kHz
  
• Mounting Depth: 2 in. ; 50mm
  
• Mounting Hole Diameter: 5-1/16 in. ; 128mm
  
• Top Mount Height: 1/4 in. ; 6.5mm
  
• Weight: 15.2oz ; 430g
  
• Grilles: Yes

Advantages of purchasing from an authorized seller:

• Best prices - We sell all Kicker Products at great prices
  
• Full Factory Warranty
  
• Lifetime Customer Service by Kicker product experts
  
• Guaranteed legitimate and authentic merchandise
  

Please note: If you purchase Kicker from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

 Authorized MB Quart Dealer!

Video of GMR-1:

The MB Quart Nautic GMR Marine & Powersports source units are the perfect solution for any vehicle that will be exposed to the elements. The GMR line has been extensively tested to be waterproof, dust proof and UV stable. MB Quart’s Bluetooth Connect allows you to stream music from your favorite handheld device via Bluetooth™ opening up a world of entertainment options.

Features:

• MB QUART Nautic GMR-1 Marine ATV Boat Stereo Digital Receiver Radio w/ Bluetooth 
• Source Type: AM/FM/Bluetooth Enabled Gauge Mount Radio
• Input Types: Bluetooth, RCA, USB
• Control Buttons: Large, Waterproof - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off
• Bluetooth™ Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process
• Built-In Power
• Four channels with 40 watts of output. These channels remain active when running external amplifiers (RCA Output) to run additional speakers in the cabin
• Additional Inputs: 1 pair RCA (AUX)

Specifications:

• Tuner Section FM Stereo Frequency Range: 87.5MHz-108MHz
  
• Tuner Section S/N Ratio: >55dB
  
• Bluetooth Range: 32' (10 Meter)
  
• RMS Power Output: 20 x 4
  
• Peak Power Output: 40 x 4
  
• S/N @1W: 81.2dBA
  
• Frequency Response (Aux In): 85Hz - 20kHZ
  
• Pre-amp Outputs: 1
  
• Pre-amp Voltage: 2v
  
• Display Type: LCD
  
• Display Backlit: Yes
  
• Minimum Impedance: 4-Ohms
  
• Dimensions Mounting Hole: 3.12" (7.93cm)
  
• Dimensions Mounting Depth: 2.87" (7.30cm)
  
• Weight: 1.5lbs (0.6K)

Advantages of purchasing from an authorized seller:

• Best prices - We sell all MB Quart Products at the lowest price as possible.
  
• Full Factory Warranty
  
• Detailed information of all products
  
• Lifetime Customer Service by MB Quart product Experts
  
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase MB Quart from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Video of RXM-F3:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high-quality components, you will be amazed at the quality and power that these new Phenom amps offer.

Before we talk about the actual amplifier, I wanted to point out that we included a microphone. Most brands do not do this. We wanted to provide you guys with the best sounding marine amplifier of course. But we also wanted to give you the ability to have a microphone so you can use all the power of the system to communicate when out on the water. This will give you many new applications of what you can use your marine system for. We included a special circuitry in the amplifier that when you talk through the microphone the music will get lower and when you are done talking the music will go back to normal volume.

The RXM-F3 is a 4 channel high power amplifier with 1,600 Watts peak output, 800 Watts RMS output (4 x 200 @ 2 Ohms). You can also bridge the amplifier and get  2 x 200 Watts RMS @ 4Ohms. The CEA-2006 compliant rating is 65 x 4 @ 4 Ohms and 95 x 4 @ 2 ohms<1% THD.  Most brands do not use CEA compliant ratings because quite simply they do not want you to be able to compare their amps to other son the market. Over here at Rockville, we want you to be able to compare our amps to any brand on the market. For this reason, we are supplying you with multiple ratings. The CEA compliant rating should be used when matching up or comparing this amplifier to other CEA compliant brands such as Kicker, Rockford Fosgate, Alpine, etc. We also supply an RMS rating which should be used when comparing with great brands that are not CEA compliant such as Hifonics, Earthquake, Powerbass, etc. The peak rating is simply what the amplifier can hit for a split second at the highest point of a song. This rating from any brand is not really important. RMS and CEA ratings truly are the most important.

The RXM-F3 has a conformal coating on its PCB (printed circuit board) in order to protect against moisture, dust, chemicals, and temperature extremes. This coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior screws are made of stainless steel to better withstand the elements. This amplifier is fully marine-rated from start to finish.

One of the tricks to determine the real power of an amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. RXM-F3 features three 20 Amp Maxi fuses. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXM-F3 you are getting your money’s worth and then some.

This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. This amplifier is completely universal. It can be installed to any marine system.

Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXM-F3 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.

We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXM-F3 1600 Watt Peak/800w RMS Marine Class D Mono Block Amplifier
• CEA Compliant Power Ratings:
  .....65 Watts RMS x 4 Channel @4 Ohms and 1% THD+N
  .....85 Watts x 4 @ 2 Ohms < 1% THD
  .....2 x 200 Watts bridged @ 4 Ohms < 1% THD
  
• RMS Power Ratings:
  .....800 Watts (4 x 200 Watts RMS) @ 2 Ohms
  .....800 Watts (2 x 400 Watts RMS) @ 4 Ohm Bridged
  .....500 Watts (4 x 125 Watts RMS) @ 4 Ohms
  
• Peak Power:
  .....1600 Watts (2 x 800 @ 2 Ohms or 1 x 1600 @ 4 Ohms)
  
• High-Speed MOSFET Power Supply
  
• Studio-Grade Bipolar Output Stage Transistors
  
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  
• CH3 & CH4 Low Pass 50Hz - 3KHz
  
• CH3 & CH4 High Pass 15Hz - 1KHz
  
• CH1 & CH2 High Pass 50Hz - 300Hz, 500Hz - 3Khz (x10)
  
• Crossover Band-Pass Control
  
• Fully Adjustable 12dB Bass Equalizer
  
• 2 Ohm Stable Stereo
  
• 4 Ohm Mono Bridgeable
  
• 3 Channel Mixed-Mono Capable
  
• Full IC-Controlled Protection Circuitry
  
• Mute and Delay Soft Start System
  
• High Level Input with Smart Auto Turn-On
  
• Full IC-Controlled Protection Circuitry
  
• 2 CH / 4 CH Input Mode Switch
  
• RCA Preamp Line Output
  
• ELNA Brand Audiophile Capacitors
  
• 8 Volt Preamp Circuitry
  
• Status Mode LED Indicator
  
• Minimum THD at Rated Power: <0.05%
  
• Frequency Response: 10Hz - 40KHz
  
• Sensitivity: 100dB @ 1w / 1m
  
• Damping Factor: > 200 @ 100Hz
  
• Three 20 Amp Maxi Fuses
  
• Dimensions: ( W x H x L ) 8.6" x 2" x 13.7"

Owner’s Manual

New Page 4

Authorized Metra Dealer!

Features:

• Metra V6-RAK4 4 Gauge Car/Marine Amplifier Wiring Installation Wire Kit with RCA's
• 17ft V6 4 GAUGE CCA multi-strand power wire.
• 3ft V6 4 GAUGE CCA multi-strand ground wire.
• 17ft 18 GAUGE CCA blue remote turn-on wire.
• 17ft V6 noise rejecting woven coaxial RCA cable with precision molded ends and split tip.
• Proprietary V6 MINI-ANL fuse holder with 60A fuse.
• Nickel Plated 4 AWG seamed crimp ring terminal with 8.5mm hole and red boot connected at battery end.
• Nickel Plated 4 AWG seamed crimp ring terminal with 8.5mm hole and black boot connected at ground.
• 4 AWG spade terminals with red and black boots for amp connection.
• Miscellaneous connectors terminals and wire ties.

Video of RMWK4:

Unboxing Video of RMWK4:

Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed! 

Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease. 

Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.

Features:

• Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
• 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
• 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 20’ Blue Remote Wire
• 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• 1PC 60A Mini-ANL Fuse
• 2PCS Ring Terminals
• 2PCS Spade Terminals
• 5PCS Speaker Cable Terminals
• 1PC Washer
• 10PCS White Cable Ties