---

Authorized Mackie Dealer!

Video of 1402VLZ4:

Description:

UNMATCHED PERFORMANCE

Each generation of VLZ mixers benefits from a reinvestment in performance, all without raising prices. By continuing to ignore the “race to the bottom,” VLZ4 benefits from generations of performance improvements like transparent EQ, class-leading negative summing bus architecture and custom-designed op-amps to ensure signal integrity from every input to every output. The result is a mixer that is at the peak of performance and is the obvious go-to compact analog mixer for engineers who demand professional results.

ONYX PREAMPS

The performance of Mackie’s Onyx mic preamps is more than proven. Just check all the amazing reviews and customer testimonials. Their boutique quality sound and unmatched performance rival any high-priced, boutique preamp on the market. Adding these flagship preamps to our VLZ4 Series compact mixers underlines our commitment to continually improving the performance of the VLZ line with each generation.

HIGH HEADROOM / LOW NOISE

The VLZ4 design goal was simple: every VLZ4 mixer must have the highest headroom and lowest noise possible. Strict attention to component quality and tolerances has led to innovations like our custom M80 op-amps and class-leading negative summing bus architecture that add yet another level of assurance that a Mackie VLZ4 mixer is the right choice for your professional audio application.

BUILT LIKE A TANK

Mackie VLZ mixers are truly “Built-Like-A-Tank.” From beer spills to drops from moving vehicles, the testimonials are as endless as the applications Mackie mixers serve. The VLZ4 series is certainly no exception. With a nearly indestructible steel wrap-around chassis and features like grime-resistant rotary sealed pots, you can be sure that buying a Mackie VLZ4 mixer is a solid investment.

VLZ4’s new black powder coat finish, cockpit-inspired controls and high-contrast knobs not only optimize your mixer’s usability in low-light scenarios, it also means your mixer looks as good as it performs.

COMPREHENSIVE AND PROVEN

Mackie’s VLZ4 line is extremely comprehensive, offering mixers of every channel count, every price point, for every application. From the ultra-compact 402VLZ4 for desktop applications to the tour-friendly 3204VLZ4, you can be sure there is a VLZ4 mixer with the right feature set for your needs.

Features:

• Mackie 1402VLZ4 14-channel Compact Mixer
• 14-channel mixer featuring Mackie signature high-headroom/low-noise design
• 6 boutique-quality Onyx mic preamps
  • Ultra-wide 60dB gain range
  • 128.5 dB dynamic range
  • +22 dBu line input handling
  • Extended frequency response
  • Distortion under 0.0007% (20Hz – 50kHz)
• Improved RF rejection perfect for broadcast applications
• Phantom power for condenser mics
• 14 high-headroom line inputs with +4/-10 operation control
• 3-band EQ (80Hz, 2.5kHz, 12kHz)
• 18 dB/oct 75Hz low-cut filter on mic input channels
• 2 aux sends, level, pan and PFL solo on each channel
• 60mm long-wearing log-taper faders
• 2 stereo returns for connecting FX processor or other stereo source
• ALT 3/4 stereo bus for added routing flexibility
• Control room / phones source matrix
• High-resolution 12-segment stereo meters
• Sealed rotary control resist dust and grime
• “Built-Like-A-Tank” rugged steel chassis with powder-coat finish
• High-visibility, high-contrast controls deliver convenient “at-a-glance” visual feedback
• Rack-mountable design using optional rack ear kit
• Multi-voltage power supply for worldwide use

Details:

• Main Mix Noise
• (20 Hz–20 kHz bandwidth, 1/4" main out, channels 1-6 gain At unity, channel EQs flat, all channels assigned to main mix, channels 1, 3 and 5 panned left, 2, 4 and 6 panned right.)
• Main mix fader down, channel faders down: –101 dBu
• Main mix At unity, channel faders down: –91 dBu
• (95 dB Signal to Noise Ratio, ref +4 dBu)
• Main mix fader At unity, channel faders At unity: –86 dBu
• Total Harmonic Distortion (THD): (1 kHz At 35 dB gain, 20 Hz–20 kHz bandwidth) Mic pre At insert <0.0007%
• Attenuation / Crosstalk
• (1 kHz relative to 0 dBu, 20 Hz–20 kHz bandwidth, line in, 1/4"main out, gain At unity)
• Main mix fader down: –100 dBu
• Channel Alt / Mute switch engaged: –90 dBu
• Channel fader down: –90 dBu
• Frequency Response (Mic input to main output (gain At unity)
• +0, –1 dB, 20 Hz to 50 kHz
• +0, –3 dB, <10 Hz to >100 kHz
• Equivalent Input Noise (EIN)(Mic input to insert send out, max gain)
• 150 ohm termination –128.5 dBu, 20 Hz–20 kHz
• Common Mode Rejection Ratio (CMRR)
• 1 kHz better than –70 dB
• Maximum Levels
• Mic in: +22 dBu
• Tape in: +16 dBu
• All other inputs: +22 dBu
• Main mix XLR out: +28 dBu
• All other outputs: +22 dBu
• Impedances
• Mic in: 2.5 k ohm
• Channel insert return: 2.5 k ohm
• All other inputs: 10 k ohm or greater
• Tape out: 1.1 k ohm
• All other outputs: 120 ohm
• EQ
• High Shelving: ±15 dB At 12 kHz
• Mid Peaking: ±15 dB At 2.5 kHz
• Low Shelving: ±15 dB At 80 Hz
• AC Power Requirements
• Power Consumption: 25 watts
• US, JP: 100 – 120 VAC, 50 – 60 Hz
• EU, UK, AU, CN: 200 – 240 VAC, 50 – 60 Hz
• Operating Temperature: 0° – 40°C, 32° – 104°F
• Fuse Rating
• 100-120V 500 mA slo blo, 5 x 20 mm
• 220-240V 250 mA slo blo, 5 x 20 mm
• Physical Properties (product): 12.5" x 3.2" x 14"
• Weight 9.5 lb / 4.5 kg
• Physical Properties (packaged product): 6.9" x 16.1" 15.2"
• Weight 12.0 lb / 5.4 kg

---

How to Set Up RMC-XLR:

Video of RMC-XLR:

Description:

The Rockville RMC-XLR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved.

You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern. They have very little background noise, and great tone.

We pay a lot of attention to detail. We could have saved a lot of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very passionate about our products and we really have a lot of respect for our customers. For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness.

The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use.

90 Day Money Back Guarantee including return shipping!

If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please.

What's Included:

• Fully metal wired mic
• (2) 100% OFC Copper Mic cables (XLR to ¼” + XLR to XLR )
• Mic clip
• Plastic carry case
• Owner’s manual
• Warranty

Features:

• Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound!

Mic Features:

• M-56 Cartridge
• Full metal mic body
• Type: dynamic
• Neodymium magnet
• Polar Pattern: uni-directional
• Frequency Response: 80 - 13Khz
• Impedance: 600 Ohms ± 30%
• Sensitivity: -72 ± 3dB

Case Features:

• High quality plastic carry case protects the mic during transportation
• Comfortably holds microphone and mic cable

Cable Features:

• XLR to ¼” Cable
• XLR to XLR Cable
• 10 Feet each
• 100% OFC oxygen free copper
• Cable delivers crystal clear distortion free signal
• Cable is 5 MM thick with cover (22 AWG standard mic cable)
• XLR cable connectors are very solid and durable

Mic clip Features:

• Heavy Duty Standard Size Microphone Clip
• Stand Mountable
• Solid Plastic Construction with copper inside (part that screws to the mic)
• Black Color

Owner’s Manual