Package Includes:

• (8) Eliminator ADJ MEGA 64 PROFILE EP DMX RGB+UV LED Club DJ Par Can Wash Up-Light
• (4) Rockville RLB40 Padded Travel Bag for (2) Chauvet or American DJ Effect Lights
• (8) Rockville RDX3M25 25 Foot 3 Pin DMX Lighting Cable 100% OFC Copper Female 2 Male

---

What's In The Box:

• 1x Mega 64 Profile EP LED par can
• Includes scissor yoke to hang on truss, mount on a wall or set on the ground
• Power Cable Length: 1.8 meter (IEC)

Description:

The Eliminator Lighting Mega 64 Profile EP is a low profile LED Par with 12x 4W Quad LED (RGB+UV) designed for uplighting, stage lighting and wall washing. With a 25-degree beam angle and 64 built-in color macros, the Mega 64 Profile EP is great for permanent or portable lighting solutions to create smooth swaths of vibrant color.

The Eliminator Lighting Mega 64 Profile EP is a compact, low profile LED wash fixture designed for uplighting, stage lighting and wall washing, and will bring color and excitement to smaller sized events or small stage performance. The Mega 64 Profile EP is powered by twelve bright 4-Watt Quad (RGB+UV 4-In-1) LED and offers a unique, more vibrant color palette with the UV LEDs than traditional RGB fixtures.

This Par is intelligently designed so that it may sit directly on the ground or inside truss without the hanging bracket because the power & DMX Ins and Outs sit on the side of the fixture, not on the rear. Its feet and scissor yoke allow for maximum lighting versatility to be used as a floor wash or hung from truss or pipe.

The Mega 64 Profile E offers smooth color mixing with no RGB+UV shadows, has a 25-degree beam angle and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC2 wireless remote, which is sold separately, to control the Mega 64 Profile EP.

Features:

• Smooth RGB Color Mixing (fast or slow color change operation) with no RGB+UV shadows
• Power & DMX Ins/Outs are intelligently designed to sit sideways so the unit can be set flat on the ground
• Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers
• Flicker Free

Specifications:

Source:

• 12 x 4W Quad (RGB+UV 4-IN-1) LEDs
• Light Output: 3,520 LUX @ 2M; 820 LUX @ 4M (25-degree beam)

Control:

• DMX-512 protocol
• 5 DMX Channel Modes: 4/5/6/9/10 Channels
• 5 Operational modes: RGB+UV Dimmer Mode, Sound Active Mode, Auto Run Mode (16 Color Change Programs, 16 Color Fade Programs, & Color Change & Fade Combination),
• Static Color Mode, & DMX Controlled
• Stand Alone or Primary/Secondary Configuration
• 4-Button DMX LED Display
• 64 built-in Color Macros
• Refresh Rate: 504Hz
• Electronic Dimming: 0-100%
• LED Pulse and strobe effect

Connections:

• Linkable via 3-pin XLR cable
• Power: IEC In/Out to daisy chain power (Link up to 12 Mega 64 Profile Plus fixtures)
• With Wired Digital Communication Network

Electrical:

• Multi-voltage Operation: AC 100 - 240V, 50/60Hz
• Power Draw: 54W Max
• Fuse: 2Amp

Dimensions & Weight:

• Dimensions (LxWxH): 10.5” x 10.25” x 4.5”/ 261 x 260 x 110mm
• Weight: 5 lbs./ 2.1 kg.

---

Video of RLB40:

Description:

The Rockville RLB40 is a padded transport bag that fits many of the most popular lighting fixtures from Chauvet, American DJ, and other leading brands. This bag accommodates 1 or 2 fixtures. There is a removable divider allowing you to accommodate 1 large fixture. Convenient side pockets allow you to carry cables, clamps and other handy accessories.

This bag will protect your lighting from bumps and scratches during transportation.

To check if this bag will hold your light(s), simply measure your lights. The dimensions of this bag are below:

• Dimensions per compartment: 13" x 13" x 6.8" in (330 x 330x175mm)
• Internal Dimensions (removing the divider): 13" x 13" x 14" (330mm x 330mm x 355mm)

Features:

• Rockville RLB40 protective lighting bag to transport many different lighting effects from show to show
• One removable divider create 1 or 2 separate compartments making this bag very durable
• Two internal compartments for 1 or 2 lights and 1 external compartment for all your cables, clamps, tape, and other accessories
• Internally padded compartments to help secure and safeguard the fixtures during transportation
• Convenient handle and shoulder strap offers multiple transportation options
• External compartments use top quality zippers that stand the test of time

Specifications:

• Some compatible fixtures: Swarm 4, Line Dancer LED, O-Beast, Trident, Radius, Kinta X, Double Derby X, Derby X (x2), LED Mushroom, Vue series, Abyss LED 2.0 (x2), J-Six (x2), Obsession LED (x2), Fallout, Gobo Zoom LED (x2), Hemisphere 5, Intimidator Scan LED 100, Intimidator Scan LED 200, LED Techno Strobe RGB (x4), LED Techno Strobe (x4), LED Shadow (x4), LX-15 (x4), LX-10 (x4), LX-5 (x4), Scorpion GVC (x2), Scorpion RVM (x2), Scorpion RGY (x2), Eclipse (x2), Cirrus (x2), Scorpion Storm FX (x2), Scorpion Storm RGX (x2), Scorpion Storm MG (x4), DMX Mega Strobe III, plus many more!
• Compartments: 1 or 2
• Internal Dimensions per compartment: 13" x 13" x 6.8" in (330 x 330 x 175mm)
• Internal Overall Dimensions (removing the divider): 13" x 13" x 14" (330mm x 330mm x 355mm)
• Weight: 1.7 lbs (0.8 kg)

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

Video of RDX SERIES:

Description:

Rockville High Performance Cables are designed to provide efficient signal transfer for every application. Our Nickel-Plated, OFC (Oxygen-free copper) conductors assure that you have enhanced signal clarity with every use. Shielded for Superior EMI and RFI rejection, Rockville High Performance Cables are an ideal choice for all your lighting connection needs.

True, real DMX cables must be 120 ohms. Rockville DMX cables meets this specification.
Microphone cables are a lower impedance (ohms), and the difference in capacitance and twisting ratio makes it terrible for DMX signals.

Be sure to buy true 120 ohm DMX cables from reputable brands such as Rockville, Chauvet, American DJ.

Features:

• Rockville RDX3M25 Black Nickel Plated 3-Pin Male-Female DMX Cable
• OFC Conductors for Enhanced Signal Clarity
• XLR Connectors with Internal Strain Relief for Rugged Reliability
• Hi-density OFC Braided Shield for Superior EMI and RFI Rejection
• Impedance: 120 Ohm
• Length: 25 Ft