- (4) Rockville RF WEDGE BLACK RGBWA+UV Battery Wireless DMX DJ Par Up Light+RF Remote
- (1) Rockville ROCKFORCE W2 192 Channel Wireless 2.4Ghz DMX Lighting Controller
All About Your Rockwedge RF:
How To Set Up Your RF WEDGE:
How To Set Up Two Remotes with Your RF WEDGE:
How To Set Up a DMX Controller to Your RF WEDGE:
How To Set Up Master / Slave Mode to Your RF WEDGE:
Includes:
- Par Light
- RF long range remote control
- Mounting Clamp
- Power cable (4 feet)
- User manual and warranty card
Description:
The RF Wedge Black is an upgraded version of the Rockwedge LED light. This model has the following upgrades:
1. The RF Wedge has an RF remote instead of an IR remote. This is important because the RF remote has a long range of around 50-100 feet depending on the area, and the RF signal goes through walls and is not directional. What this means for you is that if you have 24 lights set up, you can just hit red once or twice and all of the lights will change at the same time without having to run to each light and point the remote at it. There are also 2 different RF channels if you want to control 2 separate groups of lights from the same remote.
2. We also added a tri-mode switch to this light. The modes are RF, Master, Slave/DMX. In RF mode the light will react to the remote as explained above. Once a light is set you can set it to be a master light (the remote will not control the light any longer but still leave the color/effect you set it at). You can then set your other lights to slave mode and set them to the same wireless channel color and they will just copy the setting from the master light (whether it is in sound activated mode, static color, etc).
After you turn the lights all off and then back on they will all remember these setting for next time you use them.
Control options:
1. DMX controller: You can just use these lights with a DMX controller (wired and wireless)
Set the 3 way switch to slave and you can also hit the wireless button to select a wireless channel.
2. RF Remote mode: You can use the RF WEDGE lights using only the RF remote and you get 2 RF channels for 2 different groups.
3. Master/Slave only: Set any light to RF mode and set it to the color or setting you want. Now change the switch on that light to master. Set the switch to "slave" on the lights that you want to replicate the master light and be sure to select the same wireless channel color. You can have up to 7 groups of master/slave lights.
For example: Lets say you have 4 lights dedicated to your façade. Set a light to RF and from the remote hit sound mode. Then turn the switch to master. Then take your other 3 lights and set them to slave and click the wireless button to match them onto the same wireless channel color. You now have a sound activated façade light show! The remote can still be used on your other lights that are set to RF mode without effecting your façade lights. When you turn your lights off after your party ends and then turn them on again for your next party the settings will be remembered after pressing the enter button for each light.
These are just some examples of how you can use these modes. You can mix and match. For example you can have 12 lights in slave mode connected to a DMX controller, and 4 lights for your façade that are on master/slave mode on a different wireless channel, and then have 24 additional lights in RF mode with 12 of them on one RF channel and 12 on the other RF channel. This light gives you the ultimate flexibility and controls.
Best battery on the market
The biggest complaint about some of the other battery powered par lights on the market is that the battery does not last long enough and that the batteries die every few months. Our RF Wedge uses the best battery on the market. It will last twice as long as the other battery powered par lights on the market. These batteries can cycle hundreds of times without you ever needing to replace them.
Our built-in battery is 7,800 mAh. The famous brands on the market have batteries that are around half of this one and they still charge almost twice the price. Our light can run 24 hours on a single charge with single color mode.
The RF WEDGE light has a battery indicator with LED's so you know how much longer your battery will last.
Our model also has field replaceable batteries just in case the battery does ever go bad.
100% true wireless!
The built in 2.4GHZ Wireless DMX 512 receiver allows you to link multiple lights together without wires. Other popular battery powered par lights still require you to Link them together with wires to control them via DMX. Our RF WEDGE Par lights are truly wireless. Both wireless DMX and battery powered!
Best and brightest
Our RF WEDGE is the best and brightest in its class. Other popular par lights are just RGB. The RF WEDGE has RGBWA+UV! That Is a huge advantage! That means our LED's are each capable of red, green, blue, white, amber and ultraviolet. This gives you the ability to output more precise and sharp colors. The UV capability is also a great feature to have. In total our light has 16.7 million colors. Our LED's can handle 18 watts each totaling 54 watts. We use LED's that are 3 times as bright as the voltage signal to them. What this means is that the LED's will last longer because they have 3 times the power handling as the power being given to them. These lights will operate at more than double the brightness of our competitors.
Features:
- Rockville RF WEDGE BLACK 54w RGBWA+UV Rechargeable Battery Wireless DMX Par Light with RF remote
- RF remote with 70 foot range and Dual channels (RF remote can control many lights at the same time from a distance)
- 3 mode switch (RF, Master, Slave/DMX) allows for ultimate flexibility and control
- 100% true wireless! Built in 2.4GHZ Wireless DMX 512 receiver allows you to link multiple lights together without wires (7 groups)
- Built in rechargeable battery allows you to use the lights without plugging them in making your setup 100% wireless
- Light Source: 3 LEDs / Each can handle 18 Watts which is 300% the handling of the voltage being given to the LED so they will last for 50,000 hours of use
- Each LED is a 6-in-1 RGBWA+UV (RED, GREEN, BLUE, WHITE, AMBER + ULTRA VIOLET)
- DMX control: 6 or 10 channels
- DMX input and output (3 pin)
- 50,000 hours life expectancy
- RF wireless remote control included
- Super bright: 6500 lux @1m (way brighter than others on the market)
- Large color 4-digit digital LCD display for easy color mixing & operating. Our interface is the easiest to use on the market
- Easy to operate with the large LCD display, remote control, DMX controller, built in programs, and sound activated mode
- Easy color mixing on one screen
- LED angle: 30 degree (+ or – 5)
- Built in 7,800 mAh lithium battery
- Battery indicator uses LED's so you know how much longer your battery will last
- Single Color run time - Red: 24 hours, Green: 22 hours
- Double Color run time: 15 hours
- All Colors run time: 12 hours
- Recharge Time: 10 hours
- Battery will still perform optimally even after hundreds of charging cycles
- Battery overcharge protection
- Power supply: AC110V-220V/50-60Hz
- Power consumption: 25w
- Automatic modes: color change, strobe, color blend cycle, color jump change, sound activated
- Flicker Free lights
- Colors: 16.7 million colors
- 1-year warranty
- Black Housing
- Create customized colors using the built-in LCD display
- Field replaceable batteries
- Truss mountable
- Rubber feet
- 110/220 switchable for use in any country
- Unit Dimensions: 4.45 x 4.45 x 7.2inches
- Unit Weight: 4.4 lbs.
- Wireless DMX range: 1,000 to 1,500 feet
All About Your ROCKFORCE W2:
How To Set Up Your ROCKFORCE W2:
Buttons, Faders, & Controls Explained on Your ROCKFORCE W2:
How To Set Up Wireless DMX with your ROCKFORCE W2:
How To Set Up a Scene on Your ROCKFORCE W2:
How To Set Up a Chase on Your ROCKFORCE W2:
Includes:
- Lighting Controller
- Power Cable
- Wireless Transmitter Antenna
- Manual and Warranty Card
Description:
Rockville is proud to introduce the all new ROCKFORCE W2 universal DMX Controller with 192 DMX channels. This controller has a built-in wireless DMX transmitter allowing you to control your lights wirelessly. The way wireless DMX works is that your controller has a transmitter and your light needs to have a receiver. Some lights have the wireless DMX receiver built in. If they don't, we now sell a wireless DMX receiver called the DMX-WRE. This will add a wireless DMX receiver to your light. This DMX controller has the wireless transmitter built in.
Even if you have only one wireless receiver, you can have a setup with this wireless DMX controller and you can connect one receiver to your light, and then daisy chain all your other lights together.
Another option is to have each one of your lights with a wireless receiver and then you literally need no DMX wires. This willactually save you money because our wireless DMX receivers cost less than most DMX cables. (search DMX-WRE).
This controller is easy to use and is designed to work seamlessly with lights from the leading brands such as Chauvet, American DJ and more! Our DMX controller is top quality and includes easy to understand instructions. This controller functions the same as the other leading brand controllers.
With the RockforceW2 you can control 12 lights with up to 16 channels per light. In addition, there is a 4-bit LED display and built in microphone which can be used to set up automatic modes. A great function we would like to mention is that you can take the program from any light and easily assign it to another light. This added feature provides flexibility and will saves you a ton of time at your next gig!
Although this controller has complex features we were able to design it with users of all experience levels in mind. This controller is so user friendly we gave it to some people who had little to no experience using lighting controllers and they were able to get the hang of it in no time!
We tested this against controllers from the leading and most famous lighting manufacturers and our controller performed as good or better at a fraction of the price! We are so confident in the reliability, build quality, and your satisfaction with this product that we will give you a 90-day money back guarantee. You can use the item and if you don't love it, then we will cover return shipping cost and give you all your money back upon receiving the return.
Features:
- Rockville ROCKFORCE W2 192 Channel Light/Fog DMX Lighting Controller With Built In Wireless DMX Transmitter
- Built in wireless DMX transmitter and antenna
- Model DMX-WRE receiver available in our store is a DMX receiver compatible with this
- This is also compatible with all of our wireless DMX lights
- 12 Scanners of 16 channels each
- 23 Banks of 8 programmable scenes
- 192 DMX channels of control
- 6 Programmable chases of 184 scenes
- 8 Sliders for manual control of channels
- Automatic mode program controlled by speed and fade time sliders Fade time /speed
- Blackout master button
- Reversible DMX channels allows fixture to react opposite to others in a chase
- Manual override allows you to grab any fixture on the fly
- Built-in microphone for music triggering
- DMX polarity selector
- Power failure memory
- 4-bit LED display
- Power Supply: 110-240Vac,50-60Hz(DC9V-12V)
- Electric current: No less than 300mA
- Power Consumption: 10W
- Control Signal: DMX512
- Control Channels: 192CH
- Product Dimensions (L x W x H): 19" x 5.24" x 2.76" inches
- Product Weight: 3.75 lbs
Wireless DMX Features:
- Daisy-chain multiple lights using master/slave mode and use one receiver to control all of the connected lights. This setup requires one receiver or if your light has the receiver built in it requires nothing else additional
- Each light can have a receiver built in (or use our DMX-WRE on each light) and each light will have its own channels on the controller so they can all be controlled independently (this can be done with up to 7 lights/groups)
- Makes it easy to set up all of your lights without a mess of wires!
- Controls work without any delay. These are extremely reliable
- The product uses the 2.4GHz frequency band
- Efficient GFSK modulation with 126 channel high-speed frequency hopping (FHSS). Hops 1100 times per second for interference-free operation
- 3-color LED displays status and parameters
- One-touch operation
- 7 selectable groups of lights can be controlled independently
- Connect up to 25 receivers
- Requires you to hold the button to change linking - this prevents accidental un-linking
- System information - CPU: 32-bitARM Core
- Distance: 1968 feet (600 meters)
- Modulation: GFSK maximum transmit power: 23 dBm
- Receiver sensitivity: -94 dBm
- UPC:
- 613817079536
