Package Includes:

• (3) Pair of Rockville HC655 6.5" 500 Watt In-Ceiling Home Theater Speakers 8 Ohm
• (1) Pair JBL CONTROL 19CS 8" 200 Watt In-Ceiling Home Subwoofers 8-Ohm Subs

---

Video of HC655:

Enjoy superb sound quality without bulky cabinet speakers crowding the room. These ceiling speakers are precision tuned for excellent audio response at high and low volumes. These speakers are perfect for both large and small rooms. For larger rooms you can install 8 or more of them while in smaller rooms 2 or 4 will fill the room. These are perfect for complete home systems where you want to install speakers in multiple rooms.

These in-ceiling speakers feature a 6.5” polypropylene cone for clear, rich mids and deep bass. Rubber surrounds eliminate unwanted distortion so all your music sounds loud and clear. Our mylar dome tweeter provides clean, crisp highs. Each pair puts out 160 watts RMS and 500 watts of peak power! This is more than enough power to fill large rooms. The included sheer grill enables flush installation and can be painted to match any décor. Our high quality spring loaded push terminals supply a perfect signal from your amp or receiver.

These speakers will outperform other speakers on the market that sell for $125 and up. We also are offering a 90 day money back guarantee including return shipping. If you are not 100% satisfied with these we will send you a pre-paid shipping label and take them back and refund all of your money.

Features:

• Pair of Rockville HC655 6.5” White 500 Watt 2-Way In-Ceiling Home Theater Speakers
  
• Peak Power Handling: 250 Watts (per speaker) / 500 Watts (per pair)
  
• RMS Power Handling: 80 Watts (per speaker) / 160 Watts (per pair)
  
• Polypropylene Cone
  
• Rubber Surround
  
• 6.5” Woofer
  
• 1” Aluminum Voice Coil
  
• ½” Mylar Dome Tweeter
  
• 10 oz. Ferrite Magnet
  
• High Quality Spring Loaded Push Terminals
• Aim-able Swivel Tweeter
• Paintable Flush Mount Grills
  
• Frequency Response: 60Hz – 20KHz
  
• Sensitivity: 89dB @ 1w / 1m
  
• Impedance: 8 Ohms
  
• Mounting Depth: 2.91”
  
• Cut-out Diameter: 7.6”
  
• Color: White (paintable)

---

Description of CONTROL 19CS:

In-Ceiling Subwoofer
The Control 19CS uses advanced proprietary technologies to produce powerful bass from a low profile in-ceiling design.

Features:

• Pair JBL CONTROL 19CS 8" 200 Watt In-Ceiling Home Subwoofers 8-Ohm Subs
• Unique Nested Chamber™ design and Linear Dynamic Aperture™ port design delivers high output from a compact enclosure.
• JBL’s exclusive SonicGuard™ overload protection allows higher operational levels and improved
• system reliability.
• Component: Long excursion 200 mm (8 in) driver.
• Packaged with grille, backcan and tile rails for fast installation and easy stocking.
• Simple installation and wire connection method.

Specifications:

• Frequency Range 42 Hz - 200 Hz
• Power Capacity 200 W Continuous Program Power
• Nominal Sensitivity 95 dB SPL, 1W @ 1 m (3.3 ft) in ceiling near corner (p/2) 89 dB SPL, 1W @ 1 m (3.3 ft) in center of ceiling (2p)
• Nominal Coverage Angle 180° conical coverage
• Rated Maximum SPL 115 dB @ 1 m (3.3 ft) in ceiling near corner (p/2)
• Nominal Impedance 8 ohms
• Low Frequency 200 mm (8.0 in) Polypropelene cone.
• 38 mm (1.5 in) coil on aluminum former
• Enclosure Material Backcan: Formed steel Baffle/Rim: Medium impact polystyrene, fire rated UL94V-0
• Overload Protection Full-range power limiting to protect network and transducers. (On Control 19CS, not on Control 19CST)
• Terminations Removable locking connector with screw-down terminals. 2 input terminals and 2 loop-thru output terminals. Max. wire size 12 AWG (2.5 mm2)
• Safety Agency Rating In accordance with IEC60849 / EN60849. Suitable for use in air handling spaces, per U.L.-2043, U.L.-1480, NFPA90, NFPA70A.
• Outside Dimensions (H x Dia) 345 x 345 mm (13.6 x 13.6 in) 318 mm (12.5 in) front of ceiling tile to
• back of backcan
• Cutout Size (H x W) 305 mm (12.0 in)
• Net Weight (ea) 5.5 kg (12 lb
• Shipping Weight (pair) Control 19CS: T12.7 kg (28 lb)
• Control 19CST: 14.3 kg (32 lb)
• Included Accessories C-shaped support backing plate 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles) Cutout template Paint shield Removable locking wiring connector