- (2) Rockville W8T4-S2 8" Shallow Mount 1000 Watt Slim Car Audio Subwoofer 2-Ohm Sub
- (1) Kicker 46CXA4001T CXA400.1 400 Watt RMS Mono Class D Car Audio Amplifier Amp
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Video of T4 Series Shallow Mount subs:
CEA Compliant Legitimate Power Ratings
Peak Power = Amount of power the sub can handle for a burst during the loudest point during a song. This number is not as important as the RMS power. This subwoofer has 1,000 watts peak which is a lot of power for a small 8" subwoofer.
Program Power = The RMS power the way most middle of the road brands on the market rate their products. This sub can handle 500 watts program power. So for example a 500 watt RMS Hifonics amplifier will work perfectly with one of these.
CEA Rated RMS Power = This is an official tested rating by a specific industry standard. This is the way the top brands in the industry such as Kicker, Rockford, etc rate their items. This subwoofer is 250 watts RMS CEA rated. This rating is measured at a very specific distortion level. You can feel confident matching this with a high end amplifier from Kicker, or Rockford, or any other high end brand that uses CEA compliant ratings.
We supply all 3 ratings so that you can compare prices of our product to any brand on the market and also so you can confidently match this subwoofer to amplifiers from many other brands.
Description:
Rockville W8T4-S2 8" Subwoofers feature the thinnest mounting depths available making them the best shallow-mount driver's suitable for the most intricate bass installations. Deep bass that's made to fit where standard-sized subwoofers can’t. What else can you ask for?The
Rockville W8T4-S2 subwoofers feature a 2-Ohm single voice
coil. These subwoofers are engineered to deliver
serious low frequency response where space is limited. Whether installed
behind the seat in a compact car, pick-up truck or in a motorcycle's saddlebags,
make no mistake Rockville T4™ subs will rock you!
Utilizing a sophisticated “High-BL” motor structure
together
with a large-diameter, progressive-roll
spider provides
increased linearity and superior overall sound quality. A vented core magnet motor structure
with extra thick back & top plates allows for full
voice-coil extended peak-to-peak excursion, creating ultra
deep bass response. Engineered with a special aluminum alloy
high-temperature voice coil winding around the high-mass
vented pole piece, helps to keep the woofers cool even when
your music gets “hot”!
The Rockville W8T4-S2 is CEA-2031
compliant and rated with an amazing 1000 watts peak and 250 watts RMS. That
means you are getting 100% accurate RMS power ratings. These
days lots of brands have competitions over how many thousands of watts they can
write on the box of their items. The problem is you do not know what you are getting from them. It is easy to print a box that
says 2,000 watts Max. Our subwoofers are rated in the same way that other famous
brands rate their products. We also feel our manufacturing engineers are the
best. The sound quality on our
Rockville subs are just amazing. Our engineers who design the subwoofers are all in
in the USA and
have over 30 years
experience manufacturing car audio.
If you are not happy with these, we will call tag them and take them back within 30 days of when you receive them for a full refund. On top of that you get a 1 year exchange warranty for any defects.
If you want the best value for a shallow mount car subwoofer, and you want a great quality product that sounds great, and you also want hassle free return policies, then we highly recommend these Rockville T4 subs.
Features:
- Rockville W8T4-S2 8” 1000 Watt 2-Ohm Shallow Mount Car Subwoofer
- Power Handling: 1000 Watts Peak Power / 500 Watts Program / 250 Watts RMS (CEA Rating)
- Ultra Stiff Paper Composite Cone
- 3D Molded High Gloss Acrylic Dust Cap
- Ultra Slim, Expanded and Rolled Steel Basket
- High Density Laminated Butyl Rubber Surround
- High Power Strontium Magnet with Ultra Saturated, High BL Motor Gap
- Vented Core Magnet Motor Structure
- High Temperature Aluminum Voice Coil Former
- Lightweight Compact Design Ideal for Any Installation
- Magnet Protection Rubber Band
- Dual Nickel Plated Spring Loaded Push Terminals
- Shallow Mount Subwoofer
- Impedance: SVC 2 Ohm
- Cutout Diameter: 7 Inches
- Mounting Depth: 2.5 Inches
- Frequency Response: 39 Hz to 500 Hz
- Sensitivity: 90dB @ 1w/1m
- Voice Coil: 1.5” High Power Voice Coil
- Magnet weight: 33 Oz
- Washer/Yoke Plates: 6mm Machined Steel
- X-Max: 8.4mm Peak-to-Peak
Enclosure Recommendations:
- Sealed: 0.35 cu. Ft - 0.85 Cu. Ft.
- Vented Tuned at 35Hz: Not Recommended
- Vented Tuned at 45Hz: 1.00 cu. Ft. - 2.00 Cu. Ft.
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Authorized Kicker Dealer!
Description of 46CXA4001T:
CX-Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated look. Mono amps offer an optional remote level control to adjust your bass right from the dash.
CX-Series Mono Amps are now one-ohm stable, giving you even more power and wiring options for your system! Using efficient Class-D power, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.
CX.1 Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware. CX.1 Amps deliver as much as 400 watts into one bass channel.
Features:
- KICKER 46CXA4001T CXA400.1 400 Watt RMS Mono Class D Car Audio Amplifier Amp
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC (link to remote) Remote Bass Control
- Vertical mounting hardware included for another unique look
- Dimension (L x W x H): 12 inch x 9 inch x 4 inch
- Weight: 5 lbs
Specifications:
- RMS Power Rating:
- .....4 ohms: 150 watts x 1 chan.
- .....2 ohms: 300 watts x 1 chan.
- .....1 ohms: 400 watts x 1 chan.
- CXRC Remote Bass Capable (sold sep.)
- Dimensions: 8-1/8 in. (20,6 mm)
- Frequency Response: 25 - 200Hz +0/-1dB
- Input sensitivity: Low level: 250mV-10V ; High level: 1V-40V
- Signal to Noise Ration: >95dB, a-weighted, re: rated power
- Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
- Subsonic Filter @ 25hz, 24db/octave
- KickEQ™ Boost: Variable 0-6dB @40Hz
Advantages of purchasing from an authorized seller:
- Best prices - We sell all Kicker products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Kicker product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Kicker products from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- UPC:
- 613817173524
