Package Includes:

• (2) Rockville W15K6D4 V2 15" 4000w Car Audio Subwoofer Dual 4-Ohm Sub CEA Compliant
• (1) Rockville Krypton-M5 8000 Watt Peak / 2000w RMS Mono 1 Ohm Car Amplifier Amp
• (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC

---

Video of W15K6D4 V2:

Features:

• Rockville W15K6D4 V2 K6 Series 15" Dual 4-Ohm Car Subwoofer
• Peak Power Handling: 4000 Watts
• Program Power Handling: 2000 Watts
  
• CEA Rated RMS Power Handling: 1000 Watts
• 3" Voice coils (Black Aluminum Former Wound with 100% OFC Copper Wire
• The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
• Double Stacked 112 Oz High Quality Magnet
• Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
• Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
• Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
• Red Stitching Cone Reinforcement Ensures Long Life
• Polypropylene (PP) Dustcap
• Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
• Impedance: Dual 4-Ohm Voice Coils
• Vented Hole on T-yoke Enhances Heat Dissipation
• Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
• Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
• High BL Magnetic Motor Gap
• We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
• Cutout Diameter: 14.09” inches
• Mounting Depth: 7.4” inches
• Frequency Response: 27 Hz - 1.5K kHz
• 8mm T-Yoke + 8mm Washer
• Sensitivity: 85dB
• Sealed Enclosure Volume: 1.85 - 3.0 Cubic Feet
• Vented/Ported Enclosure Volume: 2.75 - 4.0 Cubic Feet
• Weight: 19.84 Lbs.
• Shipping Weight: 24.25 Lbs.
• Shipping Box Dimensions: 18.19" x 18.19" x 13.19" Inches
• XMAX:24 MM (One way)

Detailed Info:

• Body: Non-Pressed Paper
• Gap Plate Inside Diameter: 90mm (3.54 inches)
• Gap Plate Outside Diameter: 156mm (6.14 inches)
• Gap Plate Thickness: 25mm (1 inch)
• Yoke Outside Diameter: 145mm (5.71 inches)
• Yoke Thickness: 8mm (0.31 inches)
• Yoke Pole Diameter: 70mm (2.8 inches)

TS Parameters:

TS Parameter	Wired in Series	Wired in Parallel	Description of Measurement
Electrical Parameters
Re	8.07 Ohm	2.05 Ohm	Electrical voice coil resistance at DC
Le	7.619 mH	1.907 mH	Frequency independent part of voice coil inductance
L2	11.216 mH	2.829 mH	Para-inductance of voice coil
R2	17.51 Ohm	4.44 Ohm	Electrical resistance due to eddy current losses
Cmes	784.26 µF	3145.99 µF	Electrical capacitance representing moving mass
Lces	22.28 mH	5.56 mH	Electrical inductance representing driver compliance
Res	54.75 Ohm	13.47 Ohm	Resistance due to mechanical losses
fs	38.1 Hz	38.1 Hz	Driver resonance frequency
Mechanical Parameters (Using Laser)
Mms	345.647 g	338.431 g	Mechanical mass of driver diaphragm assembly including air load and voice coil
Mmd (Sd)	319.142 g	311.927 g	Mechanical mass of voice coil and diaphragm without air load
Rms	8.05 kg/s	7.988 kg/s	Mechanical resistance of total-driver losses
Cms	0.051 mm/N	0.052 mm/N	Mechanical compliance of driver suspension
Kms	19.78 N/mm	19.35 N/mm	Mechanical stiffness of driver suspension
Bl	20.994 N/A	10.372 N/A	Force factor (Bl product)
Lambda s	0.066	0.069	Suspension creep factor
Loss Factors
Qtp	1.376	1.393	Total Q-factor considering all losses
Qms	10.271	10.131	Mechanical Q-factor of driver in free air considering Rms only
Qes	1.514	1.54	Electrical Q-factor of driver in free air considering Re only
Qts	1.319	1.337	Total Q-factor considering Re and Rms only
Other Parameters
Vas	48.0382 l	49.1035 l	Equivalent air volume of suspension
n0	0.168%	0.169%	Reference efficiency (2 pi-radiation using Re)
Lm	84.46 dB	84.48 dB	Characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom	84.43 dB	84.38 dB	Nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd	819.4 cm²	819.4 cm²	Diaphragm area
EBP	25.2	24.7	Efficiency bandwidth product

---

 

Krypton Series (Product Video):

What's in the Box:

• Amplifier
• 200A External fuse
• Bass Remote with clipping indicator
• Birth sheet with tested power
• Owner’s manual
• Mounting Screws
• Warranty

Description:

The Krypton series of amplifiers by Rockville are engineered to have the best reliability and features. Whether you are a car audio competitor or just like to enjoy loud music. We engineered and designed these amps from the ground up to give you great sound quality and great features. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.

Our favorite feature we introduced of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).

We guarantee that this series of amplifiers will not only meet their Dyno Certified power but exceed their rated power.

Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ are created equal. Some bass EQ's will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give you as much clean power to your subs as possible. Our voltage display allows you to make sure you are getting the proper voltage to your amp and our clip indicator on the remote will make sure you always send clean power to your subs. In addition we also guarantee the amplifier will be giving over the rated Dyno Certified so you can confidently match our amplifier with high-end subs and know what to expect!

What about sound quality and efficiency though ??
Well glad you asked. This amplifier is engineered so well that it has an extremely low signal to noise ratio which just means the sound will be super clean even at high volume levels. It also has a good efficiency rating so you don't have to draw too much power from your battery. One other thing that is important is that we engineered this to have a high common mode rejection rating (CMRR). This means that the amp has the capability to block out engine noise signals. By rejecting unwanted noises the end result is the cleanest sound quality.

Once again, Rockville has stepped up its game with the all new Krypton series. Their is no other amp like it on the market. In our opinion this is the best budget series of amps in the world. We actually enjoy this amp more then others that cost over 2 times the price.

Features of Krypton-M5:

• Rockville Krypton-M5 8000 Watt Peak / 2000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  
  • 1 Ohm: 2000 Watts x 1 Channel <1% THD+N (79% efficient)
  • 2 Ohm: 1300 Watts x 1 Channel <1% THD+N (86% efficient)
  • 4 Ohm: 780 Watts x 1 Channel <1% THD+N (89.5% efficient)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  
  • 1 Ohm: 8000 Watts x 1 Channel
  • 2 Ohm: 5200 Watts x 1 Channel
  • 4 Ohm: 3120 Watts x 1 Channel
• Digital Voltage Display on Amp (Accurate within 0.15V)
• Power/Protect/Clip LED Indicators on the front panel
• Power/Protect/Clip LED Indicators on Remote control
• Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Low Pass Filter: 50Hz - 250Hz
• Subsonic Filter: 15Hz - 55Hz
• Fully Adjustable 12dB Bass Equalizer
• Remote Dashboard Subwoofer Control
• 8 Volt Preamp Circuitry
• Phase Control Switch
• High-Speed MOSFET Power Supply
• Optical Coupler Class “D” Technology
• Full IC-Controlled Protection Circuitry
• Mute and Delay Soft Start System
• RCA Preamp Line Output
• Status Mode LED Indicator
• Minimum THD at Rated Power: <0.1%
• S / N Ratio: >90dB
• Frequency Response: 15Hz - 250Hz
• Damping Factor: >150 @ 100Hz
• 200A External Fuse Included
• Passes the Signal Burst Test (Instant signal for full power “SPL Contest”)
• Rockville engineered with a super low signal to noise ratio to give you clean sound
• Improved Bass EQ filter works well to boost the proper frequencies
• Dimensions: (W x H x L) 18.26" x 8.66" x 2.2"

 

---