Package Includes:
- (2) Rockville K5 W12K5S2 12" 1400w 2 Ohm Car Audio Subwoofer Sub 350w RMS CEA Rated!
- (1) Rockville REC97 Dual 12" Ported SUV Subwoofer Sub Box Enclosure - Behind 3rd Row
- (1) Dual Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spade Terminals
All About Your K5 SERIES:
Wiring for 1 SVC 2 Ohm SUBS:
Wiring for 2 SVC 2 Ohm SUBS:
Features:
- Rockville W12K5S2 K5 Series 12" 2-Ohm Car Subwoofer
- Peak Power Handling: 1400 Watts
- Program Power Handling: 700 Watts
- CEA Rated RMS Power Handling: 350 Watts
- 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
- The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire
- 50 Oz High Quality Magnet
- Cast Iron Basket With Black Sanded Finish
- Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone - This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Blue Stitching Cone Reinforcement Ensures Long Life
- Paper Dustcap is light weight and efficient helping the sub to play louder even if your amp is not so powerful
- Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
- Impedance: Single 2-Ohm Voice Coil
- Vented Hole on T-yoke Enhances Heat Dissipation
- Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
- Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight
- High BL Magnetic Motor Gap
- We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
- Cutout Diameter: 11.02" inches
- Mounting Depth: 5.03" inches
- Frequency Response: 25 Hz - 1.5K kHz
- 6mm T-Yoke + 6mm Washer
- Sensitivity: 88dB
- Sealed Enclosure Volume: 0.8 - 1.3 Cubic Feet
- Vented/Ported Enclosure Volume: 1.3 - 2.0 Cubic Feet
- Weight: 10.1 Lbs.
- Shipping Weight: 11.6 Lbs.
- Shipping Box Dimensions: 13.78" x 13.78" x 8.97" Inches
Detailed Info:
- Body: Non-Pressed Paper
- Gap Plate Inside Diameter: 80mm (3.14 inches)
- Gap Plate Outside Diameter: 156mm (6.14 inches)
- Gap Plate Thickness: 25mm (0.98 inches)
- Yoke Outside Diameter: 145mm (5.7 inches)
- Yoke Thickness: 6mm (0.23 inches)
- Yoke Pole Diameter: 50mm (2 inches)
T/S Parameters (Tested on a Klippel):
Electrical Parameters | |||
Re | 2.06 | Ohm | electrical voice coil resistance at DC |
Le | 0.689 | mH | frequency independent part of voice coil inductance |
L2 | 1.367 | mH | para-inductance of voice coil |
R2 | 12.77 | Ohm | electrical resistance due to eddy current losses |
Cmes | 1339.39 | µF | electrical capacitance representing moving mass |
Lces | 11.94 | mH | electrical inductance representing driver compliance |
Res | 20.04 | Ohm | resistance due to mechanical losses |
fs | 39.8 | Hz | driver resonance frequency |
Mechanical Parameters | |||
(using laser) | |||
Mms | 130.909 | g | mechanical mass of driver diaphragm assembly including air load and voice coil |
Mmd (Sd) | 118.62 | g | mechanical mass of voice coil and diaphragm without air load |
Rms | 4.878 | kg/s | mechanical resistance of total-driver losses |
Cms | 0.122 | mm/N | mechanical compliance of driver suspension |
Kms | 8.19 | N/mm | mechanical stiffness of driver suspension |
Bl | 9.886 | N/A | force factor (Bl product) |
Description:
The REC97 Bed Liner speaker box is made with Grade “A” MDF wood and rugged Bed Liner. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures for over 20 years. All Rockville Bed Liner enclosures are sprayed with the finest actual Bed Liner. That means your Speaker Box will not only perform for years but look good while doing it. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well! This makes your Rockville enclosure rock even more!
Features:
- REC97 SUV Vented Subwoofer Enclosure is custom designed to fit 3rd Row of a GM/CHEVY SUVs. These enclosures are built with the quality additives needed to maximize the performance and aesthetic of any sound system.
Enclosure Measurements:
- Type of Enclosure: VENTED Enclosure
- Sub Size: Dual 12”
- Dimensions in Inches: 42x14.75x14.5
- Mounting Depth: 10.0”
- Tuning Freq = 41Hz
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.59 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.9 Cubic Feet
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613826596727