Authorized Mackie Dealer!

Video of SRM550:

Description:

The SRM550 1600W High-Definition Powered Loudspeaker deliver a new level of SRM ruggedness, output, clarity, simplicity and unmatched bass response, ideal as a main or monitor. Truly "Built-Like-A-Tank,” huge system power is paired with custom transducers within professional-grade, internally braced all-wood cabinets that redefine tough. The SRM550 features our High Definition Audio Processing™, including patented acoustic correction DSP for the ultimate in high-definition sound, plus system optimization tools like application-specific speaker modes and an amazingly accurate feedback destroyer. Ready for anything, the integrated 2-channel mixer with Wide-Z™ inputs can handle any signal with ease. The SRM550 delivers the modern output, amazing sound and proven durability you demand from a portable loudspeaker

 Features:

• Mackie SRM550 High-Definition Powered PA Speaker
• Power Rating: 1600 Watts Peak / 800 Watts RMS
• 1600W system power paired with custom transducers deliver gig-level volumes with room to spare
  • 12" high-output LF driver / 1.4" titanium dome compression driver
• “Built-Like-A-Tank” all-wood, internally braced cabinet
  delivers professional-grade road-worthiness
  • Rugged 18-gauge steel grille and fine-textured, sleek black cabinet finish
  • Front ported for maximum low-end extension and punch
• High-Definition Audio Processing for professional
  sound with unmatched clarity
  • Patented acoustic correction developed with touring geniuses at EAW®
  • Precision 2-way digital crossover
  • Driver time alignment and phase correction
• Quick one-button Speaker Mode selection  for application-specific voicing (PA, DJ, Monitor and Soloist)
• Effortlessly eliminate nasty feedback with one-button automatic Feedback Destroyer
• Integrated 2-channel mixer featuring dual Wide-Z™ inputs
  • Handles anything from mics to guitars to mixers with a single twist of the gain knob
  • Includes stereo RCA inputs for easy connection to music source
  • Perfect for the singer/songwriter, plug in and leave the mixer at home
• Smart Protect™ DSP kicks in to protect your investment when things get pushed a little too hard
• Monitor-specific 60° angle and voicing mode perfect for cutting through on stage

Details:

• Acoustic Performance
  • Frequency Response: (–3 dB) 55 Hz – 17 kHz
  • Frequency Response: (–10 dB) 49 Hz – 20 kHz
  • Max peak SPL: 132 dB
  • Crossover Point: 3 kHz
  • Dispersion: 90° x 50°
• High-Frequency Section
  • Voice Coil Diameter: 1.0 in / 25 mm
  • Horn Entry Diameter: 1.4 in / 36 mm
  • Diaphragm Material: Titanium
  • Magnet Material: Ferrite
• Low-Frequency Section
  • Woofer Diameter: 12.0 in / 305 mm
  • Voice Coil Diameter: 2.6 in / 66 mm
  • Diaphragm Material: Paper
  • Magnet Material: Ferrite
• Power Amplifiers
  • System Power Amplification: 800 watts RMS
                                                 1600 watts Peak
• Low Frequency Power Amplifier
  • Rated Power: 400 watts RMS
                           800 watts Peak
  • Rated THD: < 1%
  • Cooling: Convection
  • Design: Class D
• High Frequency Power Amplifier
  • Rated Power: 400 watts RMS
                           800 watts Peak
  • Rated THD: < 1%
  • Cooling: Convection
  • Design: Class D
• Input / Output
  • Channel 1
    • Mic-Line: 8 k Ohm balanced
    • 1/4" TRS, Wide-Z: 1 M Ohm unbalanced
  • Channel 2
    • Mic-Line: 8 k balanced
    • 1/4" TRS, Wide-Z: 1 M unbalanced
  • RCA 25 k unbalanced
  • Thru: Male XLR balanced [Passive when the Ch 1 / Mix switch
             is in the “out” (Ch 1)  position] [Active when the Ch 1 / Mix switch
             is in the “in” (Mix) position]
• Power
  • US detachable line cord 90 – 130 VAC, 60 Hz, 200W
  • EU detachable line cord 190 – 240 VAC, 50 Hz, 200W
  • AC Connector 3-pin IEC 250 VAC
  • Power Supply Type Switchmode
  • Operating Temperature [extended ambient temperature]: 0 - 40 °C/32 -  104 °F"
• Safety Features
  • Input Protection: Peak and RMS limiting, power supply and amplifier  thermal protection
  • Display LEDs: Defeatable front power ON (Running Man logo), Front  load power limiter,
                            Speaker Mode, Feedback Destroyer, input signal
• Construction Features
  • Cabinet: 15 mm Poplar
  • Finish: High durability black paint
  • Handles: One on each side
  • Grille: Powder-coated 18 gauge steel
  • Fly Points: Three M10 x 1.5 x 37 mm
  • Monitor Angle: 60°
• Mounting Methods Floor mount, pole mount or fly via three  integrated M10 mounting points (using M10 x 1.5 x 37 mm forged shoulder  eyebolts).
• Physical Properties (packaged product)
  • SRM550
    • Height 24.7 in / 627 mm
    • Depth 18.9 in / 480 mm
    • Width 18.3 in / 465 mm
    • Weight 44 lb / 20 kg
• Physical Properties (product)
  • SRM550
    • Height 23.0 in / 585 mm
    • Width 14.2 in / 360 mm
    • Depth 14.9 in / 377 mm
    • Weight 37 lb / 16.8 kg

    ---

    All About Your RVSS4AB:

    How To Set Up Your RVSS4AB:

    How To Set Up Two Speakers on your RVSS4AB:

    How To Set Up Your RVSS4AB with a Lighting Crossbar:

    Video of RVSS4AB:

    
    

    Description:

    The Rockville RVSS4AB is an air charged Pro Audio Speaker stand with automatic lifting and and lowering system. The center pole features an air cartridge which helps to accommodate both the lifting and lowering of any speaker with a weight capacity of 154 pounds! The system height can be adjusted from 47" to 79".
    By simply turning the secondary lock mechanism to release the pole extension from its base, you then proceed to to release the air cartridge pin and the speaker stand will begin to automatically and slowly raise your speaker to your desired height, once you reached the desired height, release the air pressure pin and turn secondary locking mechanism and tighten. To remove your speakers, turn secondary locking mechanism counter clockwise, push air cartridge pin in and pull your speaker down.
    

    Features:

    • Rockville RVSS4AB Tripod Speaker Stand With Air Lift and Lowering System
    • Travel Bag Included!
    • Hydraulic System Makes Raising and Lowering The Speaker Quick, Painless, and Safe
    • Air Assisted Lift allows the speaker stand to raise with the push of a button
    • Air Assist lowering system lowers the speaker for easy dismounting
    • Easy Pull Pin Mechanism For Air Powered Lift
    • Push Pin For Slow Air Powered Decline/Lower
    • Easy Twist Locking Pin Mechanism To Keep Speaker at Desired Height
    • Adjustable height 42" - 79"
    • Heavy Duty Steel and Aluminum Composite Construction
    • Lightweight construction allows for easy maneuverability and travel
    • Color: Black
    • Weight Capacity: 154 lbs
    • Base spread: 0 - 23inches
    • Tube Diameter: 1.38 inches
    • Leg Diameter: 1.38 inches

    The Rockville Difference:
    Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
    
    About Rockville Quality Control Procedures:
    The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
    
    Great features and great quality make Rockville a great choice.

    ---

    Video of RCXFM20E-B:

    Description:

    All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
     
     The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

    Features:

    • Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
    • XLR Connectors with Internal Strain Relief for Rugged Reliability
    • 100% Copper Conductors for Enhanced Signal Clarity
    • 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
    • Length: 20 Ft
    • Color: Black