- (2) Rockville SPGN258 Dual 15” 3000w 2-Way 8-Ohm Passive DJ PA Speakers/ABS Cabinet
- (1) Rockville RPM870 8 Channel 6000w Powered Mixer w/USB, Effects, 8 XDR2 Mic Pres
- (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cables 100% Copper
- (1) Rockville RWM65U Dual UHF 15 Channel Metal Handheld Wireless Microphone System
- (1) Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville RFAAW DJ Event Facade Light Weight Metal Frame Booth+Travel Bag+Scrim
- (2) Rockville RockPAR50 LED RGB Compact Par Can DJ/Club/Stage DMX Wash Lights - White
Video of SPGN258:
What's Included:
- Dual 15" speaker
- Owner manual and warranty card
Features:
- Rockville SPGN258 Dual 15" 3000w 2-Way 8-Ohm Passive DJ PA Speaker/ABS Cabinet
- 3000 Watts Peak / 1500 Watts Program / 750 Watts RMS
- Built in high quality crossover delivers amazing sound
- Dual15" Long-throw Woofer with 2" KSV voice coils and 51 Oz magnets and non-pressed paper cones
- 1.75” inch Compression Horn Driver for Clear Highs
- Trolley handle and wheels making it easy to transport
- Speakon Input and Speakon Output
- Enclosures are made with exceptionally rugged high impact ABS
- Frequency Response: 45Hz - 20kHz
- Maximum SPL @ 1w/1m: 128dB
- Sensitivity: 99dB @ 1w/1m
- Nominal Impedance: 8 ohms
- Nominal Dispersion: 110º x 65º
- Crossover Frequency: 2.5 kHz
- Dimensions: 17.7" X 14.7" X 44" each speaker
All About Your RPM870:
How To Set Up Your RPM870:
What the Channels & Controls do on Your RPM870:
How To Set Up a Mic/Line/Instrument on Your RPM870:
How To Set Up Karaoke on Your RPM870:
How to Set Up Speakers on Your RPM870:
How To Set Up a Subwoofer to Your RPM870:
The Rockville RPM870 is an 8 channel powered console mixer with USB input. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mic preamps. We manufactured this mixer with XDR2 low noise mic preamps. These are some of the best sounding mic pre’s on the market. They compete in quality with any brand on the market! The next goal we had was versatility. This mixer has aux sends and returns on each channel so you can route your external effects easily. We also built in a 24 bit digital effects processor that sounds great. We didn’t include 99 effects which all sound the same. Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests.
We tested this and we ran the mixer to (2) Mackie C300Z speakers, and even with the volume turned up half way these were filling an extremely large room with sound! We also tested these with dual 15” DJ speakers and really cranked them and the sound of the highs and lows were crisp and clean. The great thing about this is the amp does not overheat even when cranking it for hours straight. The power amp built into this mixer is 500 x 2 RMS @ 8 ohms and 750 x 2 RMS @ 4 ohms. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings but RMS is the true continuous output power you should look at.
Other great features are a dual 7 band master EQ, a 4 band EQ on each channel, an EQ kill switch, and pad and solo buttons on each channel. Rounding things out, we added a USB input that has 2 functions. It can play back your audio tracks. But what is really cool is that you can record your main mix onto the USB! We also added bluetooth to this mixer to give you all the latest and greatest options.
90 Day Money Back Guarantee
The price point we are selling this at is about a third of what any other brand would charge. On top of this, we are offering a 90 day money back guarantee including return shipping. If you do not love this mixer, you can send it back and get all your money back and we will even cover the cost of return shipping. Just be sure to send it back including the original packaging.
Features:
- Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power
- RMS Power Output:
.....750w x 2 @ 4 Ohm
.....500w x 2 @ 8 Ohm
- Program Power Output:
.....1500w x 2 @ 4 Ohm
.....1000w x 2 @ 8 Ohm
- Peak Power Output:
.....3000w x 2 @ 4 Ohm
.....2000w x 2 @ 8 Ohm
- 8 Channel mixer section: 6 mono channels, 1 stereo channel
- 8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones
- XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pre’s on the market
- 1 dedicated USB input to play back music or record the main mix
- USB supported formats are MP3, WAV, WMA
- Built in bluetooth wireless audio streaming
- 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects)
- Effects level control can adjust signal level of each effect
- Effects mute button
- FX footswitch input lets you turn your effects on or off
- 4-Band EQ (high, high-mid, low-mid, low) per channel
- Each channel is equipped with pad, must, and solo buttons with LED’s
- Each channel has gain, aux control, FX control, Pan control, Volume control
- Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping
- Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch)
- Aux send and Aux returns on every channel to connect all types of external effects and processors
- You can control your monitor mix and check levels through your headphones
- Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED’s lit up
- Power and Output level LED indicators
- Main output fader allows you to fade the sound between the left and right channel
- RCA input, RCA output, and USB player
- Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R
- Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.
- When the pad button is pressed in the gain will adjust from 240dB to 0dB
- Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down. You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want
- Built in cooling fan and ventilation system
- USB input supports unlimited capacity (as many GB as you want)
- 110/220V switchable power supply
- Dimensions: (L*W*H) 15.16” x 17.72” x 7.09” inches / 38.5 x 45 x 18 cm
- Weight: 23.06Lbs. (10.46kg)
Video of RCSS1425:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
- 100% Copper Conductors for Lower Resistance
- Black PVC Jacket for Both Durability and Flexibility
- Intended for High-Current Applications Only, Not Line-Level Signals
- Length: 25 Ft
- Gauge: 14
All About Your RWM65U:
How To Set Up Your RWM65U:
Includes:
- Metal receiver with LED display
- 2 Metal handheld mics with LED display
- ¼” to ¼” Audio output cable
- AC adapter (5 feet)
- 2 Antennas
- Batteries x 4 (AA batteries)
- Owner manual
- Warranty card
Features:
- Rockville RWM65U dual wireless microphone system
- UHF frequency band for interference free operation
- 15 Selectable frequency channels (per mic) for interference free operation
- Convenient channel switching at the push of a button on the mic
- Built in dual antenna fail-safe system that will automatically switch antennas if there is interference
- (2) High sensitivity metal handheld wireless UHF microphones
- Rugged metal receiver with digital display that shows the frequency, the signal strength,and audio level
- Microphone wireless distance: 300-400 feet indoors
- Microphones are dynamic unidirectional with cardioid pick-up patterns
- (2) Individual XLR outputs and a mixed ¼” TRS output
- Dual filter design to limit feedback and interference
- Individual microphone volume controls
- Ergonomic microphone construction
- Each mic has a digital display with battery level indicator
- Low power consumption for longer battery life
- Latest UHF digital technology, which is controlled by a central microchip that guarantees no cutouts
- Frequency Range: 517-533.3Mhz
- 110/220 Switchable for use in any country
- Microphone wireless distance: 300-400 feet indoors
Video of Rockville DJ Facades and Accessories:
Video of RFAAW:
Each Set Includes:
- (4) Panels each 27.5” W x 47.2” H
- Stretchable White Scrim
- Carry Bag for easy Transport
- 3M Velcro
The Rockville RFAAW DJ Event Facade is the best in its class! Our Rockville employees have used all the popular Façades on the market and had so many frustrations, so we decided to make our own!
What makes ours way better:
1. Light-weight
Our panels are made out of pure aluminum! Other brands use steel which is not as durable and weighs a lot more. They use this material simply because it is cheaper. We had the option during product development to choose steel or aluminum. The steel would have cost $10 less actually. We went with the aluminum because it is lighter in weight and much stronger.
2. Larger panels
We made each of our panels 27.5” inches wide. We include 4 panels which totals 110” inches. Our competitors panels are too small. Their panels are around 17 – 20 inches wide each panel. That adds up to only 80” inches. You would have to use a pretty small table or buy 2 facades. I am talking from personal experience.
3. Foldable design for quick setup and break-down
Our design folds for easy setup and breakdown! Our competitors advertise that their item can fold and break down easily. I’ve used them, and you have to literally disconnect the hinges, and then next time you use them again you have to reconnect it. I do not consider it quick or easy. Ours literally just folds and you do not have to disconnect all the hinges. Our model is the only one I have seen on the market that truly folds for quick and easy transport.
4. 360 Degree panel rotation
Our panels can rotate a full 360 degrees, giving you the freedom to wrap these around a table and angle them perfectly to make your setup professional looking. One of the biggest issues that annoyed me the most about the competitor’s panels is that they have huge limitations in the angles of their panels. What was most annoying to me was that when you try to angle them how you want, they either got stuck or the hinges popped out and I had to set them up again and again. With the Rockville 360 degree rotating panels you are completely free to angle your panels easily without any limitations!
5. Built-in scrim!
The stretch fabric panels are easily removable for cleaning. Our scrim can be washed by hand in cold water and laid down flat to dry. Our scrim is also a fire retardant.
6. Travel bag included
Transportation and storage is simple with the included carry bag.
7. Non-slip rubber feet for stability
We decided to add rubber non-slip feet to our model. This adds more stability to the façade.
8. Expandable!
We sell models RAPFAW and RAPFAB which are add on panels so you can expand your black or white facade and have an unlimited amount of panels connected together. We also sell separately models RSCFAB and RSCFAW which are black or white scrims. This way you can interchange the color of your scrim depending on the event you are using this for. Another purpose of this is if you want to have one set in the wash you can still have a backup available.
8. Price!
I personally felt like I got ripped off when I paid over $250 for a DJ Event Façade. I did not see any reason for it to cost so much. I got even more upset when I put it together and it did not feel like $250. We decided to go to market with a product twice as good at half the price! We want the best gear to be affordable for everyone!
9. 90 Day Money Back Guarantee including return shipping!
If for any reason you are not 100% satisfied with your purchase we will send you a prepaid shipping label and refund you in full for this item. We know that this will be the best Façade you have ever purchased so it is highly unlikely you will want to return it.
Features:
- Rockville RFAAW DJ Event Facade with White Scrim and Travel Bag
- (4) Panels included – each are 27.5” W x 47.2” H
- Light Weight Aluminum Frames. The entire product weighs 7 LBS, around a third of the weight of our competitors who make their panels out of steel! Also our light-weight aluminum is much stronger than steel
- Includes travel bag for easy transport
- Includes white scrim
- Includes a carrying bag to store and keep facade scrim looking its best
- Folds for easy break down and travel – no need to disconnect the hinges!
- 360 degree rotating panels allows each panel to be positioned to your liking with no limitations
- Detachable hinges
- Includes white scrim made of a special stretch material
- Scrim is fire retardant
- Scrim is easy to wash – simply wash with cold water and lay it flat to dry
- Non-slip rubber feet for stability
- Expandable: Add additional panels sold seperately (models RAPFAW and RAPFAB)
- Additional scrims available in our store in black and white (models RSCFAB and RSCFAW)
- Product weight: 7 LBS
- Packaged shipping weight: 10 LBS
All About Your ROCKPAR50:
What's In The Box:
- (1) Par Light
- (1) Power Cable
- (1) Dual-Bracket
- (1) Owner's Manual
- (1) Warranty Card
Description:
Rockville is proud to introduce our first member of the RockPAR series of lights! The Rockpar50 is a Par can Wash light that features DMX control, dimmer, strobe, color mixing, and even has a power input and output. What this means is that with only 1 outlet you can use numerous lights by plugging the first light into the wall and then each additional light into the power output of the previous light. This is the only light on the market with this feature at this price point! The DMX input and output allows daisy chaining which will give you the ability to control all the lights simultaneously and in sync.
Each RockPAR50 has 3 or 6 channels of DMX control. You can control color, strobe rate, color fading, Dimming, color mixing, and ID address making these lights some of the most versatile on the market and perfect for any type of party or event. These lights can operate in many modes. You can have them run through automated programs, or they can be controlled via sound activation where they will go to the beat of the music! To get the ultimate control of your lights you can use DMX and select master/slave control to have all your other lights copy the program of the master light.
The RockPAR50 is super bright and long lasting and features 16.7 Million different color change variations! The LED’s last up to 100,000 hours and include 6 red, 6 green, and 6 blue LED’s which mix together to make almost any color. The brackets that come with the RockPAR50 can double as both floor stands or used to hang from a ceiling, light stand, or truss. These lights have a sleek slim profile design which will complement the look of any party or event.
Our Wash Lights go through extremely strict testing procedures to ensure that the LED’s in our lights are the best quality and long lasting. These Par cans are the best value on the market. There is no other light with so many great features at this price point. We are so confident in their quality that we offer a 2 year warranty so buy with confidence!
Features:
- Rockville RockPar50 Par Light with DMX Control, Dimmer, Strobe, Color Mixing, and More
- Power input and power output allows you to link multiple units together using only one wall outlet
- DMX in and out allows daisy chaining multiple lights making it easy to control numerous lights synced together
- 3 or 6 Channels of DMX Control
- Operation Modes: Auto, Voice-Activated, Master-Slave, DMX512
- Strobe, Color Change, Color Fade, Dimmer, ID Address, Color Mixing Controls
- Color: 16.7 Million Different Color Change Variations
- Double-bracket doubles as floor stand and hanging bracket
- Static colors and RGB color mixing with or without DMX controller
- Strobe effect with adjustable speed
- Built-in automated programs via master/slave or DMX with variable speed
- Slim profile with powerful and long lasting LED’s
- Adjustable Beam angle using included bracket
- Light source 18 LED’s (6 red, 6 green, and 6 blue)
- Each LED is high powered at 1 watt each. The total power is more than famous brands on the market who might have more LEDs but each LED is only 0.25 watts on their models
- Dimmer: 0-100%
- Input Voltage: 110-240V/50-60Hz
- Power Consumption: 24W
- Advanced switching power supply
- Constant current avoids LED’s from blowing
- 20,000 – 100,000 hour LED life
- IP grade: 20
- 110/220 switchable
- Unit Dimensions: 7.28” x 7.01” x 4.33” inches
- UPC:
- 613815695912
